Hi all, Just trying to set up a simple (I think) email alert rule. I know about the problem in 1.1.2 using a device class filter, but I'm not doing that. In fact, the only filter I put on (since you seem to need at least one) is "Production State = Production".
The setup is: A windows box running HTTP, in the /Device/Server/Windows device class. That box is in a group named "/Build Machines". The admin user is an Administrator for that group. I've done a test email for the admin email address and that went through. I set up an alert rule for the admin user, and enabled it. Delay is zero, email addr for the rule is blank and action is email. There are no schedules associated with the rule (so it should always be active, right?). If I take the http service down on the monitored box, I can see a red event for the box, but no email goes out. If I look at the zenactions log, I see nothing but "Processed 0 rules" and "Processed 0 commands" every minute. I've tried adding a schedule and everything else that I can think of, but nothing seems to make a difference. I must be missing something basic about alerts, but I don't know what and there's not much information on troubleshooting them in the manual. Any ideas? Thanks, Kelly ------------------------ Kelly Hickel -------------------- m2f -------------------- Read this topic online here: http://community.zenoss.com/forums/viewtopic.php?p=6806#6806 -------------------- m2f -------------------- _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
