well, i haven't had a lot of time to work with this...but i'm having trouble getting the onboard sata to work in anything but NATIVE IDE mode.
I'm not sure exactly what the problem is....i'm wondering if i bought the wrong cable (i have a norco 4220 case so the drives connect via a sas sff-8087 on the backpane) I thought this required a "reverse breakout cable" but maybe i was wrong....this is the first time i've worked with sas on the otherhand, I was able to flash my intel Intel SASUC8I cards with the LSI SAS3081E IT firmware from the LSI site. These seem to work fine. I think i'm just going to order a 3rd card and put it in the pci-e x4 slot. I don't want 16 drives running as sata and 4 running in IDE mode. Is there any way i can tell if the drive i installed opensolaris to is in IDE or SATA mode? On Thu, May 13, 2010 at 4:43 AM, Orvar Korvar < knatte_fnatte_tja...@yahoo.com> wrote: > Great! Please report here so we can read about your impressions. > -- > This message posted from opensolaris.org > _______________________________________________ > zfs-discuss mailing list > zfs-discuss@opensolaris.org > http://mail.opensolaris.org/mailman/listinfo/zfs-discuss >
_______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
