psrinfo -pv shows:
The physical processor has 8 virtual processors (0-7)
x86 (AuthenticAMD 100F91 family 16 model 9 step 1 clock 200 MHz)
AMD Opteron(tm) Processor 6128 [ Socket: G34 ]
On Sat, May 15, 2010 at 8:35 PM, Dennis Clarke <dcla...@blastwave.org>wrote:
> ----- Original Message -----
> From: Thomas Burgess <wonsl...@gmail.com>
> Date: Saturday, May 15, 2010 8:09 pm
> Subject: Re: [zfs-discuss] Opteron 6100? Does it work with opensolaris?
> To: Orvar Korvar <knatte_fnatte_tja...@yahoo.com>
> Cc: zfs-discuss@opensolaris.org
>
>
> > Well i just wanted to let everyone know that preliminary results are
> good.
> > The livecd booted, all important things seem to be recognized. It
> > sees all
> > 16 gb of ram i installed and all 8 cores of my opteron 6128
> >
> > The only real shocker is how loud the norco RPC-4220 fans are (i have
> > another machine with a norco 4020 case so i assumed the fans would be
> > similar.....this was a BAD assumption) This thing sounds like a hair
> > dryer
> >
> > Anyways, I'm running the install now so we'll see how that goes. It
> > did take
> > about 10 minutes to "find a disk" durring the installer, but if i
> remember
> > right, this happened on other machines as well.
> >
>
> Once you have the install done could you post ( somewhere ) what you see
> during a single user mode boot with options -srv ?
>
> I would like to see all the gory details.
>
> Also, could you run "cpustat -h" ?
>
> At the bottom, according to usr/src/uts/intel/pcbe/opteron_pcbe.c you shoud
> see :
>
> See "BIOS and Kernel Developer's Guide (BKDG) For AMD Family 10h
> Processors" (AMD publication 31116)
>
> The following registers should be listed :
>
> #define AMD_FAMILY_10h_generic_events
> \
> { "PAPI_tlb_dm", "DC_dtlb_L1_miss_L2_miss", 0x7 }, \
> { "PAPI_tlb_im", "IC_itlb_L1_miss_L2_miss", 0x3 }, \
> { "PAPI_l3_dcr", "L3_read_req", 0xf1 }, \
> { "PAPI_l3_icr", "L3_read_req", 0xf2 }, \
> { "PAPI_l3_tcr", "L3_read_req", 0xf7 }, \
> { "PAPI_l3_stm", "L3_miss", 0xf4 }, \
> { "PAPI_l3_ldm", "L3_miss", 0xf3 }, \
> { "PAPI_l3_tcm", "L3_miss", 0xf7 }
>
>
> You should NOT see anything like this :
>
> r...@aequitas:/root# uname -a
> SunOS aequitas 5.11 snv_139 i86pc i386 i86pc Solaris
> r...@aequitas:/root# cpustat -h
> cpustat: cannot access performance counters - Operation not applicable
>
>
> ... as well as psrinfo -pv please ?
>
>
> When I get my HP Proliant with the 6174 procs I'll be sure to post whatever
> I see.
>
> Dennis
>
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
