Upgrade the HBA firmware to version 1.30. We had the same problem, but upgrading solved it for us.
Daniel Bakken On Wed, Jul 7, 2010 at 1:57 PM, Joeri Vanthienen <m...@joerivanthienen.be>wrote: > Hi, > > We're using the following components with snv134: > - 1068E HBA (supermicro) > - 3U SAS / SATA Expander Backplane with dual LSI SASX28 Expander Chips > (supermicro) > - WD RE3 disks > > We've got the following error messages: > > Jul 7 10:09:12 sanwv01 scsi: [ID 107833 kern.warning] WARNING: /p...@0 > ,0/pci8086,3...@7/pci15d9,a...@0/s...@b,0 (sd2): > > Jul 7 10:09:12 sanwv01 incomplete read- retrying > > Jul 7 10:09:17 sanwv01 scsi: [ID 243001 kern.warning] WARNING: /p...@0 > ,0/pci8086,3...@7/pci15d9,a...@0 (mpt0): > > Jul 7 10:09:17 sanwv01 mpt_handle_event_sync: IOCStatus=0x8000, > IOCLogInfo=0x31123000 > > Jul 7 10:09:17 sanwv01 scsi: [ID 243001 kern.warning] WARNING: /p...@0 > ,0/pci8086,3...@7/pci15d9,a...@0 (mpt0): > > Jul 7 10:09:17 sanwv01 mpt_handle_event: IOCStatus=0x8000, > IOCLogInfo=0x31123000 > > Jul 7 10:09:19 sanwv01 scsi: [ID 365881 kern.info] /p...@0 > ,0/pci8086,3...@7/pci15d9,a...@0 (mpt0): > > Jul 7 10:09:19 sanwv01 Log info 0x31123000 received for target 21. > > Jul 7 10:09:19 sanwv01 scsi_status=0x0, ioc_status=0x804b, > scsi_state=0xc > > Jul 7 10:09:19 sanwv01 scsi: [ID 365881 kern.info] /p...@0 > ,0/pci8086,3...@7/pci15d9,a...@0 (mpt0): > > Jul 7 10:09:19 sanwv01 Log info 0x31123000 received for target 21. > > Jul 7 10:09:19 sanwv01 scsi_status=0x0, ioc_status=0x804b, > scsi_state=0xc > > Jul 7 10:09:19 sanwv01 scsi: [ID 365881 kern.info] /p...@0 > ,0/pci8086,3...@7/pci15d9,a...@0 (mpt0): > > Jul 7 10:09:19 sanwv01 Log info 0x31123000 received for target 21. > > Jul 7 10:09:19 sanwv01 scsi_status=0x0, ioc_status=0x804b, > scsi_state=0xc > > Jul 7 10:09:19 sanwv01 scsi: [ID 365881 kern.info] /p...@0 > ,0/pci8086,3...@7/pci15d9,a...@0 (mpt0): > > Jul 7 10:09:19 sanwv01 Log info 0x31123000 received for target 21. > > Jul 7 10:09:19 sanwv01 scsi_status=0x0, ioc_status=0x804b, > scsi_state=0xc > > Jul 7 10:09:21 sanwv01 smbsrv: [ID 138215 kern.notice] NOTICE: > smbd[WINDVISION\franz]: testshare share not found > > Jul 7 10:09:26 sanwv01 scsi: [ID 243001 kern.warning] WARNING: /p...@0 > ,0/pci8086,3...@7/pci15d9,a...@0 (mpt0): > > Jul 7 10:09:26 sanwv01 SAS Discovery Error on port 0. > DiscoveryStatus is DiscoveryStatus is |SMP timeout| > Jul 7 10:10:20 sanwv01 scsi: [ID 107833 kern.warning] WARNING: /p...@0 > ,0/pci8086,3...@7/pci15d9,a...@0 (mpt0): > > Jul 7 10:10:20 sanwv01 Disconnected command timeout for Target 21 > > After this message, the pool is unavailable over iscsi. We can't run the > format command or zpool status command anymore. We have to reboot the > server. This happens frequently for different Targets. The stock firmware on > the HBA is 1.26.01 > -- > This message posted from opensolaris.org > _______________________________________________ > zfs-discuss mailing list > zfs-discuss@opensolaris.org > http://mail.opensolaris.org/mailman/listinfo/zfs-discuss > >
_______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss