Brilliant. I set those parameters via /etc/system, rebooted, and the pool
imported with just the ­f switch. I had seen this as an option earlier,
although not that thread, but was not sure it applied to my case.

Scrub is running now. Thank you very much!

-Scott


On 9/23/10 7:07 PM, "David Blasingame Oracle" <david.blasing...@oracle.com>
wrote:

> Have you tried setting zfs_recover & aok in /etc/system or setting it with the
> mdb?
> 
> Read how to set via /etc/system
> http://opensolaris.org/jive/thread.jspa?threadID=114906
> 
> mdb debugger
> http://www.listware.net/201009/opensolaris-zfs/46706-re-zfs-discuss-how-to-set
> -zfszfsrecover1-and-aok1-in-grub-at-startup.html
> 
> After you get the variables set and system booted, try importing, then running
> a scrub. 
> 
> Dave
> 
> On 09/23/10 19:48, Scott Meilicke wrote:
>>  
>> I posted this on the www.nexentastor.org <http://www.nexentastor.org>
>> forums, but no answer so far, so I apologize if you are seeing this twice. I
>> am also engaged with nexenta support, but was hoping to get some additional
>> insights here. 
>> 
>> I am running nexenta 3.0.3 community edition, based on 134. The box crashed
>> yesterday, and goes into a reboot loop (kernel panic) when trying to import
>> my data pool, screenshot attached. What I have tried thus far:
>> 
>> Boot off of DVD, both 3.0.3 and 3.0.4 beta 8. 'zpool import -f data01' causes
>> the panic in both cases.
>> Boot off of 3.0.4 beta 8, ran zpool import -fF data01
>> That gives me a message like "Pool data01 returned to its stat as of ...",
>> and then panics.
>> 
>> The import -fF does seem to import the pool, but then immediately panic. So
>> after booting off of DVD, I can boot from my hard disks, and the system will
>> not import the pool because it was last imported from another system.
>> 
>> I have moved /etc/zfs/zfs.cache out of the way, but no luck after a reboot
>> and import.
>> 
>> zpool import shows all of my disks are OK, and the pool itself is online.
>> 
>> Is it time to start working with zdb? Any suggestions?
>> 
>> This box is hosting development VMs, so I have some people idling their
>> thumbs at the moment.
>> 
>> Thanks everyone,
>> 
>> -Scott
>>   
>>  
>> 
>> 
>> 
>> _______________________________________________
>> zfs-discuss mailing list
>> zfs-discuss@opensolaris.org
>> http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
>>   
> 


--------------------------------------------------------------------------------
We value your opinion!  How may we serve you better? 
Please click the survey link to tell us how we are doing:
http://www.craneae.com/ContactUs/VoiceofCustomer.aspx
Your feedback is of the utmost importance to us. Thank you for your time.
--------------------------------------------------------------------------------
Crane Aerospace & Electronics Confidentiality Statement:
The information contained in this email message may be privileged and is 
confidential information intended only for the use of the recipient, or any 
employee or agent responsible to deliver it to the intended recipient. Any 
unauthorized use, distribution or copying of this information is strictly 
prohibited 
and may be unlawful. If you have received this communication in error, please 
notify 
the sender immediately and destroy the original message and all attachments 
from 
your electronic files.
--------------------------------------------------------------------------------
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss

Reply via email to