Hello Pasi, thx for the quick answer.
Its sounds fine because with the Asus Board and at Nexenta always I get a message that my rpool is degraded when I set AHCI. Additionally with the LSI HBA the board doesnt boot by set AHCI. am Donnerstag, 16. Dezember 2010 um 20:53 hat <Pasi Kärkkäinen> u.a. in mid:20101216195305.gz2...@reaktio.net geschrieben: > On Thu, Dec 16, 2010 at 08:43:02PM +0100, Alexander Lesle wrote: >> Hello All, >> >> I want to build a home file and media server now. After experiment with a >> Asus Board and running in unsolve problems I have bought this >> Supermicro Board X8SIA-F with Intel i3-560 and 8 GB Ram >> http://www.supermicro.com/products/motherboard/Xeon3000/3400/X8SIA.cfm?IPMI=Y >> also the LSI HBA SAS 9211-8i >> http://lsi.com/storage_home/products_home/host_bus_adapters/sas_hbas/internal/sas9211-8i/index.html >> >> rpool = 2vdev mirror >> tank = 2 x 2vdev mirror. For the future I want to have the option to >> expand up to 12 x 2vdev mirror. >> >> After reading the board manual I found at page 4-9 where I can set >> SATA#1 from IDE to AHCI. >> >> Can zfs handle AHCI for rpool? >> Can zfs handle AHCI for tank? >> >> Thx for helping. >> > You definitely want to use AHCI and not the legacy IDE. > AHCI enables: > - disk hotswap. > - NCQ (Native Command Queuing) to execute multiple commands at the > same time. > -- Pasi -- Schoenen Abend wuenscht Alexander mailto:gro...@tierarzt-mueller.de eMail geschrieben mit: The Bat! 4.0.38 unter Windows Pro _______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
