----- Original Message ----- > Hi all > > I just did a small test on RAIDz2 to check whether my suspicion was > right about ZFS not treating spares as replicas/copies of drives, and > I think I've found it true. The short story: If two spares replaces > two drives in raidz2, losing a third drive, even with the spares > active, makes the pool unavailable. See full report on
Update 2010-03-04 14:15 CET I just tested on another system. This one, not in production yet, has a mirrored rpool and a 14-drive RAID10 pool named tos-data. I started a copy from a Windows machine into this CIFS share just to generate some traffic. Then I did a zfs detach of one side of each of the mirrors for tos-data and created a new 5-drive raidz2 pool name jalla with two dedicated spares. I started a dd to fill it up and plugged one drive, waited for it to resilver and plugged another, again waited for the resilver to finish and plugged the third. The server now hangs on all pools. I've also tested removing drives from mirrors and waiting for them to resilver to spares. This seems to work as expected, although I doubt booting from one will work without grub being installed. > ODT: http://karlsbakk.net/ZFS/ZFS%20Spare%20disk%20usage.odt > PDF: http://karlsbakk.net/ZFS/ZFS%20Spare%20disk%20usage.pdf These are mow updated as well Vennlige hilsener / Best regards roy -- Roy Sigurd Karlsbakk (+47) 97542685 r...@karlsbakk.net http://blogg.karlsbakk.net/ -- I all pedagogikk er det essensielt at pensum presenteres intelligibelt. Det er et elementært imperativ for alle pedagoger å unngå eksessiv anvendelse av idiomer med fremmed opprinnelse. I de fleste tilfeller eksisterer adekvate og relevante synonymer på norsk. _______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss