I have an outage tonight and would like to swap out the LSI 3801 for an
LSI 9200
Should I zpool export before the swaping the card?
On 04/16/2011 10:45 AM, Roy Sigurd Karlsbakk wrote:
I'm going to wait until the scrub is complete before diving in some
more.
I'm wondering if replacing the LSI SAS 3801E with an LSI SAS 9200-8e
might help too.
I've seen similar errors with 3801 - seems to be SAS timeouts. Reboot the box
and it'll probably work well again for a while. I replaced the 3801 with a 9200
and the problem was gone.
Vennlige hilsener / Best regards
roy
--
Roy Sigurd Karlsbakk
(+47) 97542685
r...@karlsbakk.net
http://blogg.karlsbakk.net/
--
I all pedagogikk er det essensielt at pensum presenteres intelligibelt. Det er
et elementært imperativ for alle pedagoger å unngå eksessiv anvendelse av
idiomer med fremmed opprinnelse. I de fleste tilfeller eksisterer adekvate og
relevante synonymer på norsk.
CONFIDENTIALITY NOTICE: This communication (including all attachments) is
confidential and is intended for the use of the named addressee(s) only and
may contain information that is private, confidential, privileged, and
exempt from disclosure under law. All rights to privilege are expressly
claimed and reserved and are not waived. Any use, dissemination,
distribution, copying or disclosure of this message and any attachments, in
whole or in part, by anyone other than the intended recipient(s) is strictly
prohibited. If you have received this communication in error, please notify
the sender immediately, delete this communication from all data storage
devices and destroy all hard copies.
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
