I thought this was interesting - it looks like we have a failing drive in our
mirror, but the two device nodes in the mirror are the same:
pool: tank
state: DEGRADED
status: One or more devices could not be used because the label is missing or
invalid. Sufficient replicas exist for the pool to continue
functioning in a degraded state.
action: Replace the device using 'zpool replace'.
see: http://www.sun.com/msg/ZFS-8000-4J
scrub: scrub completed after 1h9m with 0 errors on Sat May 14 03:09:45 2011
config:
NAME STATE READ WRITE CKSUM
tank DEGRADED 0 0 0
mirror-0 DEGRADED 0 0 0
c5t1d0 ONLINE 0 0 0
c5t1d0 FAULTED 0 0 0 corrupted data
c5t1d0 does indeed only appear once in the "format" list. I wonder how to go
about correcting this if I can't uniquely identify the failing drive.
"format" takes forever to spill its guts, and the zpool commands all hang......
clearly there is hardware error here, probably causing that, but not sure how
to identify which disk to pull.
--
This message posted from opensolaris.org
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
