On Tue, 26 Jul 2011, Charles Stephens wrote:
I'm on S11E 150.0.1.9 and I replaced one of the drives and the pool seems to be stuck in a resilvering loop. I performed a 'zpool clear' and 'zpool scrub' and just complains that the drives I didn't replace are degraded because of too many errors. Oddly the replaced drive is reported as being fine. The CKSUM counts get up to about 108 or so when the resilver is completed.
This sort of problem (failing disks during a recovery) is a good reason not to use raidz1 in modern systems. Use raidz2 or raidz3.
Assuming that the system is good and it is really a problem with the disks experiencing bad reads, it seems that the only path forward is to wait for the resilver to complete or see if creating a new pool from a recent backup is better.
Bob -- Bob Friesenhahn bfrie...@simple.dallas.tx.us, http://www.simplesystems.org/users/bfriesen/ GraphicsMagick Maintainer, http://www.GraphicsMagick.org/ _______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
