On 11/30/2011 02:40 PM, Edmund White wrote: > Absolutely. > > I'm using a fully-populated D2700 with an HP ProLiant DL380 G7 server > running NexentaStor. > > On the HBA side, I used the LSI 9211-8i 6G controllers for the server's > internal disks (boot, a handful of large disks, Pliant SSDs for L2Arc). > There is also a DDRDrive for ZIL. To connect to the D2700 enclosure, I > used 2 x LSI 9205 6G HBAs; one 4-lane SAS cable per storage controller on > the D2700. > > These were setup with MPxIO (dual controllers, dual paths, dual-ported > disks) and required a slight bit of tuning of /kernel/drv/scsi_vhci.conf, > but the performance is great now. The enclosure is supported and I've been > able to setup drive slot maps and control disk LED's, etc. >
Coincidentally, I'm also thinking about getting a few D2600 enclosures, but I've been considering attaching them via a pair of HP SC08Ge 6G SAS HBAs. Has anybody had any experience with these HBAs? According to a few searches on the Internet, it should be a rebranded LSI9200-8e. Cheers, -- Saso _______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss