yes which version of solaris or bsd you are using? for bsd I donot know the steps for create new BE (boot env)for s10 and opensolaris and solaris express (may be other opensolaris fork) , you use the liveupgrade
for s11 you use beadm regards
On 6/15/2012 9:13 AM, Hans J Albertsson wrote:
I suppose I must start by labelling the new disk properly, and give the s0 partition to zpool, so the new zpool can be booted?Skickat från min Android Mobil "Hung-Sheng Tsao Ph.D." <laot...@gmail.com> skrev: one possible way: 1)break the mirror 2)install new hdd, format the HDD 3)create new zpool on new hdd with 4k block4)create new BE on the new pool with the old root pool as source (not sure which version of "solaris" or "openSolaris" ypu are using the procedure may be different depend on version"5)activate the new BE 6)boot the new BE 7)destroy the old zpool 8)replace old HDD with new HDD 9)format the HDD 10)attach the HDD to the new root pool regards On 6/15/2012 8:14 AM, Hans J Albertsson wrote:I've got my root pool on a mirror on 2 512 byte blocksize disks. I want to move the root pool to two 2 TB disks with 4k blocks.The server only has room for two disks. I do have an esata connector, though, and a suitable external cabinet for connecting one extra disk.How would I go about migrating/expanding the root pool to the larger disks so I can then use the larger disks for booting?I have no extra machine to use. Skickat från min Android Mobil _______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss--
--
<<attachment: laotsao.vcf>>
_______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
