Log message for revision 41460:
Merge tim-2.9-windows-installer branch.
This is the code used to build the Zope 2.9.0 Windows installer.
It bundles Python 2.4.2, lives in peace with zpkgtools, moves
to InnoSetup 5, and simplifies most parts of the build-the-
installer process.
Changed:
U Zope/branches/2.9/inst/WinBuilders/README.txt
D Zope/branches/2.9/inst/WinBuilders/bin/makezope.bat
A Zope/branches/2.9/inst/WinBuilders/bin/msvcr71.dll
U Zope/branches/2.9/inst/WinBuilders/etc/zope.iss.in
U Zope/branches/2.9/inst/WinBuilders/mk/common.mk
U Zope/branches/2.9/inst/WinBuilders/mk/python.mk
U Zope/branches/2.9/inst/WinBuilders/mk/zope.mk
-=-
Modified: Zope/branches/2.9/inst/WinBuilders/README.txt
===================================================================
--- Zope/branches/2.9/inst/WinBuilders/README.txt 2006-01-27 01:40:29 UTC
(rev 41459)
+++ Zope/branches/2.9/inst/WinBuilders/README.txt 2006-01-27 01:40:46 UTC
(rev 41460)
@@ -1,39 +1,63 @@
Quick instructions:
-The buildout has been tested under Windows 2K and XP Pro SP2. It "almost
-works" on Win98SE (see bottom of file for discussion).
+The buildout has been tested under Windows 2K and XP Pro SP2.
Setup Environment
------------------
+Install Python 2.4.2 (or whatever is most current) by running its native
+Windows installer from python.org.
+
+ Note: Python 2.4 switched from using a Wise installer to using a
+ Microsoft .msi installer, and the latter is harder to work with. The
+ buildout used to extract Python source and binaries (.exe, .pyd, .dll)
+ from the Wise installer (which could be treated much like a zip file).
+ Now the Python installer isn't used at all. Instead, the Python
+ source is taken from the Python tarball release, and the binaries are
+ copied from your installed Python.
+
Install Cygwin from cygwin.org (the default installation should give
you everything you need).
-Install Microsoft Visual C++ 6.0 (or MSVC 7 once we get to Python 2.4)
+Install Microsoft Visual C++ 7.1 (aka Visual Studio .NET 2003). This is
+needed to compile Zope's Python C extensions compatible with Python 2.4
+(and 2.5, when that's released).
-Install InnoSetup 4.2 from www.jrsofware.org (into its default location).
-Versions earlier than 4.0.11 are known to not work; any 4.2.x release
-or later should be fine. Inno 5.x versions do *not* work (it appears the
-Inno "custom dialog" mechanism has changed in an incompatible way)
+Install InnoSetup 5.1.5 (or later) from www.jrsoftware.org, into its
+default location. Inno 4.x (or earlier) cannot work: Inno 5 introduced a
+vastly simpler way to create the custom dialog pages we want.
'svn switch' to, or check out, the Zope tag for which an installer is to be
-built. You want a native Windows checkout here, so that the text files have
-Windows-appropriate line ends.
+built.
-Within a Zope checkout, parent directory of this package is inst. Make a
-"tmp" directory, inst/tmp. Place the necessary pre-requisites in the tmp
-directory. At the time of this writing, this includes:
+Within a Zope checkout, the parent directory of this package is inst. Make
+a "tmp" directory, inst/tmp. Place the necessary pre-requisites in the tmp
+directory. At the time of this writing, these are:
- - Python-2.3.5.tgz
- - Python-2.3.5.exe (used for binary modules)
- - pywin32-205.win32-py2.3.exe (extracts binaries and sources)
- - Zope.tgz
+ - Python-2.4.2.tgz
+ - pywin32-205.win32-py2.4.exe
+ - Zope-2.9.0.tgz
As time marches on, these version numbers will obviously change. See/edit
mk/python.mk and mk/zope.mk for the exact versions required.
+You also need to install the same Windows Python that Zope will repackage.
+There doesn't appear to be a sane way to extract binaries (.exe, .pyd,
+.dll, .lib) from an .msi installer, and building Python from source is a long
+& messy process on Windows. So python.mk just copies them from an installed
+Python instead. Cautions:
+- If you didn't accept the Python installer's default directory, or if
+ you did but it's on a different drive, you'll need to change
+ WIN_PYINSTALLEDDIR in python.mk.
+
+- The main Python DLL must live in WIN_PYINSTALLEDDIR too. Depending on
+ how you installed Python, that may be sitting in some Windows system
+ directory instead; if so, make a copy in the root of your Python
+ installation.
+
+
Building
--------
@@ -85,21 +109,44 @@
Testing Zope
------------
-The test suite can be run from inst\build\:
+XXX This doesn't work right starting with Zope 2.9: it's clumsier than it
+XXX should be, and the functional tests don't even try to run (just the
+XXX unit tests).
+XXX Someone who understands how Zope3 testing from a zpkgtools-tarball build
+XXX was made to work again may be able to help here.
+The test suite can be run from inst\build\, after building the installer.
+
- Open a native (not Cygwin) DOS box. We want to test with the Python the
- Zope installer includes.
-- cd to inst\build
-- Copy log.ini from the root of the Zope checkout. This isn't necessary for
- the tests to pass, but if you don't do it a great many spurious log
- messages will be displayed on the console, some of which "look like"
- errors (some of the tests deliberately provoke errors).
-- Enter
+ Zope installer includes, in an all-native environment, to match what
+ the installer-installed code will do as closely as possible.
- bin\python bin\test.py -v --all
+- cd inst\build
+- Copy log.ini from the root of the Zope _checkout_ -- it's not included
+ in the tarball::
+
+ copy ..\..\log.ini .
+
+ Copying log.ini isn't necessary for the tests to pass, but if you don't
+ do it a great many spurious log messages will be displayed on the
+ console, some of which "look like" errors (some of the tests deliberately
+ provoke errors).
+
+- Copy test.py from the unpacked tarball::
+
+ copy ..\src\$(ZOPE_VERSION)\test.py .
+
+- Enter::
+
+ bin\python test.py -vv -m "!^zope[.]app[.]" --all
+
or whatever variation you like best. All tests should pass.
+ Note that zope.app tests should be excluded because not all of them _can_
+ pass (this isn't "a Windows thing", it's a temporary all-platform wart
+ due to missing bits from Zope3).
+
Also run the Windows installer, and play with the Zope it installs.
@@ -116,24 +163,3 @@
root of your Cygwin installation -- the same thing the Cygwin shell
desktop shortcut resolves to, so you can get the exact path by looking
at the icon's Properties).
-
-
-Win98SE notes
--------------
-
-- Every time a makefile runs xcopy, there's a segfault in kernel32.dll,
- which hangs the bash shell with an endless succession of error boxes.
- The only way I found to break out of this was to bring up the debugger,
- close it, then type Ctrl+C at the hung bash shell. The bash shell
- appears to be fine at that point, but you can never close it (short of
- killing it via the task manager).
- Same thing if xcopy32 is used instead.
- xcopy works OK directly from a bash shell. The segfaults occur if it's
- run via a makefile, or via a shell script. Guessing a problem with I/O
- redirection, since some other apps can't see keyboard input before the
- hung stuff is killed.
-
- Workaround: xxcopy works fine <http://www.xxcopy.com/>; free for
- personal use, but not for commercial use. Rename it to xcopy.exe and
- get it into your path before the native xcopy, or fiddle the XCOPY
- defn in common.mk to use xxcopy instead of xcopy.
Deleted: Zope/branches/2.9/inst/WinBuilders/bin/makezope.bat
===================================================================
--- Zope/branches/2.9/inst/WinBuilders/bin/makezope.bat 2006-01-27 01:40:29 UTC
(rev 41459)
+++ Zope/branches/2.9/inst/WinBuilders/bin/makezope.bat 2006-01-27 01:40:46 UTC
(rev 41460)
@@ -1,4 +0,0 @@
-cd %1%
-set MAKEFLAGS=
-nmake build
-nmake install
Copied: Zope/branches/2.9/inst/WinBuilders/bin/msvcr71.dll (from rev 41458,
Zope/branches/tim-2.9-windows-installer/inst/WinBuilders/bin/msvcr71.dll)
Modified: Zope/branches/2.9/inst/WinBuilders/etc/zope.iss.in
===================================================================
--- Zope/branches/2.9/inst/WinBuilders/etc/zope.iss.in 2006-01-27 01:40:29 UTC
(rev 41459)
+++ Zope/branches/2.9/inst/WinBuilders/etc/zope.iss.in 2006-01-27 01:40:46 UTC
(rev 41460)
@@ -8,9 +8,13 @@
DefaultDirName={pf}\Zope-<<VERSION>>
DefaultGroupName=Zope <<VERSION>>
OutputBaseFilename=Zope-<<VERSION>>-win32
+SolidCompression=yes
WizardImageFile=<<MAKEFILEDIR>>\etc\zlogo_left.bmp
WizardSmallImageFile=<<MAKEFILEDIR>>\etc\zlogo_top.bmp
-SolidCompression=yes
+; Starting w/ Inno 4.1.3, Inno decided to stretch the .bmp files in various
+; ways. Hard to know why, but it looks terrible on my vanilla boxes.
+; Luckily, 4.1.3 also added WizardImageStretch to turn that off.
+WizardImageStretch=no
SourceDir=.
OutputDir=.
@@ -27,13 +31,13 @@
Source: "<<MAKEFILEDIR>>\etc\README.html"; DestDir: "{app}"; Flags:
ignoreversion
Source:"bin\*.*"; DestDir: "{app}\bin"; Flags: ignoreversion recursesubdirs
Source:"doc\*.*"; DestDir: "{app}\doc"; Flags: ignoreversion recursesubdirs
-Source:"import\*.*"; DestDir: "{app}\import"; Flags: ignoreversion
recursesubdirs
Source:"lib\*.*"; DestDir: "{app}\lib"; Flags: ignoreversion recursesubdirs
Source:"skel\*.*"; DestDir: "{app}\skel"; Flags: ignoreversion recursesubdirs
+Source:"zopeskel\*.*"; DestDir: "{app}\zopeskel"; Flags: ignoreversion
recursesubdirs
; these are required to be put into the bin directory for proper function of
NT services
Source:"bin\Lib\site-packages\win32\PythonService.exe"; DestDir: "{app}\bin";
Flags: ignoreversion
-Source:"bin\Lib\site-packages\pywin32_system32\PyWinTypes23.dll"; DestDir:
"{app}\bin"; Flags: ignoreversion
-Source:"bin\Lib\site-packages\pywin32_system32\PythonCOM23.dll"; DestDir:
"{app}\bin"; Flags: ignoreversion
+Source:"bin\Lib\site-packages\pywin32_system32\PyWinTypes24.dll"; DestDir:
"{app}\bin"; Flags: ignoreversion
+Source:"bin\Lib\site-packages\pywin32_system32\PythonCOM24.dll"; DestDir:
"{app}\bin"; Flags: ignoreversion
; This is a helper module for manging registry entries at uninstall time
Source: "<<MAKEFILEDIR>>\bin\fixreg.py"; DestDir: "{app}\bin"; Flags:
ignoreversion
@@ -65,157 +69,129 @@
[Code]
var
- PasswordPrompts, PasswordValues : array of String;
- PasswordChars : array of char;
+ { custom dialog pages }
- DataDirValues: array of String;
-
- Password : string;
- DataDir : String;
+ { for selecting an instance home directory }
+ InstanceDirPage: TInputDirWizardPage;
-function InitializeSetup(): Boolean;
-begin
- { set up password data structures }
- SetArrayLength(PasswordPrompts, 1);
- PasswordPrompts[0] := 'Password:';
- SetArrayLength(PasswordValues, 1);
- PasswordValues[0] := '';
- SetArrayLength(PasswordChars, 1);
- PasswordChars[0] := '*';
- Password := '';
+ { for specifying the password for the "admin" account }
+ AdminPwdPage: TInputQueryWizardPage;
- { set up data dir data structures }
- SetArrayLength(DataDirValues, 1);
- DataDir := '';
-
- Result := True;
-end;
-
-function CollectInstanceDir(): Boolean;
-
-var
- Next: Boolean;
- DirOk: Boolean;
-
+procedure InitializeWizard;
begin
- DirOk := True;
- ScriptDlgPageSetSubCaption1('Select where Zope instance files should be
installed');
- ScriptDlgPageSetSubCaption2('Select the folder to which you would like
Setup to install Zope "instance" files, then click Next.');
+ { The instance directory page follows the standard "select additional
+ tasks" page. }
+ InstanceDirPage := CreateInputDirPage(wpSelectTasks,
+ 'Instance Setup',
+ 'Select where Zope instance files should be installed',
+ 'Select the folder to which you would like Setup to install ' +
+ 'Zope "instance" files, then click Next.',
+ False,
+ '');
+ InstanceDirPage.Add('');
- if DataDir = '' then DataDir:= 'C:\Zope-Instance';
- if DataDirValues[0] <> '' then DataDirValues[0]:= '';
+ { The admin password page follows our instance directory page. }
+ AdminPwdPage := CreateInputQueryPage(InstanceDirPage.ID,
+ 'Instance Setup',
+ 'Specify administrator password',
+ 'The login name for your Zope administrator ' +
+ 'account is "admin". When you first connect to the Zope ' +
+ 'management interface, you will need to login using the ' +
+ '"admin" username and the password you specify below.');
+ AdminPwdPage.Add('Password:', True);
+ AdminPwdPage.Add('Confirm password:', True);
- { Ask for a dir until the user has approved one or clicked Back or
Cancel }
-
- Next:= InputDir(False, DataDirValues[0], DataDir);
-
- if Next and FileOrDirExists(DataDir) then DirOk := False;
-
- while Next and not DirOk do begin
- if DataDir = '' then begin
- DirOk := False;
- MsgBox(SetupMessage(msgInvalidPath), mbError, MB_OK);
- end;
- if FileOrDirExists(DataDir) then begin
- DirOk := MsgBox('Directory Exists' #13#13 'The directory ' +
DataDir + ' already exists. Would you like to create instance files in that
directory anyway?', mbConfirmation, MB_YESNO) = idYes;
- end;
- if not DirOk then Next := InputDir(False, DataDirValues[0], DataDir);
- end;
-
- Result:=Next;
-
+ { Set default values; use settings from last time when possible. }
+ InstanceDirPage.Values[0] := GetPreviousData('InstanceDir',
+ 'C:\Zope-Instance');
+ AdminPwdPage.Values[0] := '';
+ AdminPwdPage.Values[1] := '';
end;
-function CollectPassword(): Boolean;
-var
- Next: Boolean;
+procedure RegisterPreviousData(PreviousDataKey: Integer);
begin
- ScriptDlgPageSetSubCaption1('Specify administrator password');
- ScriptDlgPageSetSubCaption2('The login name for your Zope administrator
account is "admin". When you first connect to the Zope management interface,
you will need to login using the "admin" username and the password you specify
below.');
- Next := InputQueryArrayEx(PasswordPrompts, PasswordChars,
PasswordValues);
-
- while Next and (PasswordValues[0] = '') do begin
- MsgBox('You must enter an administrator password', mbError, MB_OK)
- Next := InputQueryArrayEx(PasswordPrompts, PasswordChars,
PasswordValues);
- end;
- Password := PasswordValues[0];
- Result:=Next;
+ { Store settings so we can restore them next time. }
+ { Note that we deliberately don't store the admin password across
+ runs! We want that to vanish when the installer finishes. }
+ SetPreviousData(PreviousDataKey, 'InstanceDir', InstanceDirPage.Values[0]);
end;
-function DoInstanceHome():Boolean;
+function DoInstanceHome(): Boolean;
var
- S : String;
+ S: String;
begin
- S := WizardSelectedComponents(False);
- Result := Pos('instance', S) <> 0;
+ S := WizardSelectedComponents(False);
+ Result := Pos('instance', S) <> 0;
end;
-function DoService(): Boolean;
-var
- S : String;
+function ShouldSkipPage(PageID: Integer): Boolean;
begin
- S := WizardSelectedTasks(False);
- Result := Pos('service', S) <> 0;
+ { Skip pages that shouldn't be shown. }
+ if (PageID = InstanceDirPage.ID) or (PageID = AdminPwdPage.ID) then
+ Result := not DoInstanceHome()
+ else
+ Result := False;
end;
-function DontDoService(): Boolean;
-begin
- Result := not DoService();
-end;
-
-function ScriptDlgPages(CurPage: Integer; BackClicked: Boolean): Boolean;
+function NextButtonClick(CurPageID: Integer): Boolean;
var
- Next : Boolean;
- CurSubPage : Integer;
+ temp: String;
begin
- Next:=True;
- if ( (not BackClicked and (CurPage = wpSelectTasks)) or (BackClicked and
(CurPage = wpReady)) )
- and DoInstanceHome() then begin
- if not BackClicked then CurSubPage:=0 else CurSubPage:=1;
-
- ScriptDlgPageOpen();
- ScriptDlgPageSetCaption('Instance Setup');
+ { Validate pages before allowing the user to proceed. }
+ Result := True; // innocent until proven guilty
- while (CurSubPage >=0) and (CurSubPage <=1) and not Terminated do begin
- case CurSubPage of
- 0: Next:=CollectInstanceDir();
- 1: Next:=CollectPassword();
- end;
- if Next then CurSubPage := CurSubPage +1 else CurSubPage :=
CurSubPage -1;
- end;
-
- if not BackClicked then
- Result := Next
- else
- Result := not Next;
- ScriptDlgPageClose(not Result);
-
- end;
- Result:=Next;
+ if CurPageID = InstanceDirPage.ID then begin
+ temp := InstanceDirPage.Values[0];
+ if temp = '' then begin
+ Result := False;
+ MsgBox(SetupMessage(msgInvalidPath), mbError, MB_OK);
+ end
+ else if FileOrDirExists(temp) then begin
+ Result := MsgBox('Directory Exists' #13#13 'The directory ' +
+ temp + ' already exists. Would you like to create ' +
+ 'instance files in that directory anyway?',
+ mbConfirmation, MB_YESNO) = idYes;
+ end
+ end
+ else if CurPageID = AdminPwdPage.ID then begin
+ temp := AdminPwdPage.Values[0];
+ if temp = '' then begin
+ Result := False;
+ MsgBox('You must enter an administrator password',
+ mbError, MB_OK);
+ end
+ else if temp <> AdminPwdPage.Values[1] then begin
+ Result := False;
+ MsgBox('Please try again -- the passwords don''t match',
+ mbError, MB_OK)
+ end
+ end
end;
-function NextButtonClick(CurPage: Integer): Boolean;
+function DoService(): Boolean;
+var
+ S: String;
begin
- Result := ScriptDlgPages(CurPage, False);
+ S := WizardSelectedTasks(False);
+ Result := Pos('service', S) <> 0;
end;
-function BackButtonClick(CurPage: Integer): Boolean;
+function DontDoService(): Boolean;
begin
- Result := ScriptDlgPages(CurPage, True);
+ Result := not DoService();
end;
function GetPassword(Default: String): String;
begin
- Result := Password;
+ Result := AdminPwdPage.Values[0];
end;
-function GetDataDir(Default : String):String;
+function GetDataDir(Default: String):String;
begin
- Result := DataDir;
-end; { GetInstanceDir }
+ Result := InstanceDirPage.Values[0];
+end;
function IsAdministrator(): Boolean;
begin
- Result := IsAdminLoggedOn();
+ Result := IsAdminLoggedOn();
end;
-
Modified: Zope/branches/2.9/inst/WinBuilders/mk/common.mk
===================================================================
--- Zope/branches/2.9/inst/WinBuilders/mk/common.mk 2006-01-27 01:40:29 UTC
(rev 41459)
+++ Zope/branches/2.9/inst/WinBuilders/mk/common.mk 2006-01-27 01:40:46 UTC
(rev 41460)
@@ -1,12 +1,13 @@
-BASE_DIR=$(shell pwd)
-WIN_BASE_DIR=$(shell cygpath -w $(BASE_DIR))
-BUILD_DIR=$(BASE_DIR)/build
-WIN_BUILD_DIR=$(shell cygpath -w $(BUILD_DIR))
-SRC_DIR=$(BASE_DIR)/src
-WIN_SRC_DIR=$(shell cygpath -w $(SRC_DIR))
-TMP_DIR=$(BASE_DIR)/tmp
-WIN_TMP_DIR=$(shell cygpath -w $(TMP_DIR))
-WIN_MAKEFILEDIR=$(shell cygpath -w $(MAKEFILEDIR))
+# Use immediate assignment to avoid calling out to the shell a zillion times.
+BASE_DIR := $(shell pwd)
+WIN_BASE_DIR := $(shell cygpath -w $(BASE_DIR))
+BUILD_DIR := $(BASE_DIR)/build
+WIN_BUILD_DIR := $(shell cygpath -w $(BUILD_DIR))
+SRC_DIR := $(BASE_DIR)/src
+WIN_SRC_DIR := $(shell cygpath -w $(SRC_DIR))
+TMP_DIR := $(BASE_DIR)/tmp
+WIN_TMP_DIR := $(shell cygpath -w $(TMP_DIR))
+WIN_MAKEFILEDIR := $(shell cygpath -w $(MAKEFILEDIR))
# Root of the Windows drive you're working on. The setting here is for
# the C: drive and using a default out-of-the-box Cygwin.
@@ -16,7 +17,17 @@
RMRF=rm -rf
CD=cd
-XCOPY=xcopy /i /s /e /y
+# xcopy args:
+# /i = if dest doesn't exist and source has more than one file, assume
+# dest shoud be a directory
+# /y = don't prompt about overwriting dest if it exists -- just do it
+# /s = recurse, copying non-empty subdirectories too
+# CAUTION: don't use /e unless you have to! /e copies empty subdirectories
+# too, but has another truly bizarre behavior: if you use xcopy to copy
+# a single file, and use /e, it creates empty subdirectories in the target's
+# directory with the same names as the subdirectories in the source's
+# directory. This is worse than useless.
+XCOPY=xcopy /i /s /y
CPR=cp -r
CP=cp
@@ -26,9 +37,10 @@
SED=sed
TOUCH=touch
NMAKE=nmake
+CURL=curl -N
CSCRIPT=cscript
ECHO=echo
-ISS_DIR=$(CYGROOT)/Progra~1/Inno Setup 4
+ISS_DIR=$(CYGROOT)/Progra~1/Inno Setup 5
ISS_COMPILER=$(ISS_DIR)/Compil32.exe
# We need a version that understands cygwin paths, so /bin/
UNZIP=/bin/unzip
@@ -63,4 +75,4 @@
$(CP) $< $@
unix2dos $@
$(TOUCH) $@
-endef
\ No newline at end of file
+endef
Modified: Zope/branches/2.9/inst/WinBuilders/mk/python.mk
===================================================================
--- Zope/branches/2.9/inst/WinBuilders/mk/python.mk 2006-01-27 01:40:29 UTC
(rev 41459)
+++ Zope/branches/2.9/inst/WinBuilders/mk/python.mk 2006-01-27 01:40:46 UTC
(rev 41460)
@@ -1,65 +1,60 @@
-# The Python and pywin32 versions. For Python, both the source tarball
-# and the Windows installer must be in tmp/. For pywin32 (previously known
-# as win32all), the Windows installer must be in tmp/. Nothing beyond those
-# is required to build Python, and you don't even need a compiler.
-PYVERSION_MAJOR=2
-PYVERSION_MINOR=3
-PYVERSION_PATCH=5
-PYVERSION=$(PYVERSION_MAJOR).$(PYVERSION_MINOR).$(PYVERSION_PATCH)
-W32ALLVERSION=205
-
-# CAUTION: Extracting files from Wise installers doesn't really do what
-# you expect. While a Wise installer is a zip file, the zip file
-# structure is flat (Wise reconstructs the intended directory structure
-# from metadata stored in proprietary FILEnnnn.DAT files also in the
-# zip file). Consequently, the package structure of Python packages is
-# lost, and if there's more than one file with the same name, you only
-# get "the last one" to be extracted (all files are extracted to the
-# same directory).
+# The Python and pywin32 versions.
#
-# For Python, this doesn't matter, because we're only sucking out the
-# precompiled .pyd and .exe files from the Python installer -- there
-# are no name clashes in that set, and it's a pretty safe bet there never
-# will be (else Python wouldn't be able to decide which to use!). We
-# use the Python source tarball to get all the non-executable parts we
-# need.
+# For Python, the source tarball must be in tmp/. You must also install the
+# appropriate Python on Windows, and set WIN_PYINSTALLEDDIR here to its root
+# directory. A copy of the main Python DLL must also be in the root (you
+# may need to copy it from your Windows system directory). Earlier versions
+# of this extracted .dll, .exe, and .pyd files from Python's Wise installer,
+# but Python 2.4 uses an .msi installer, and there doesn't appear to be a
+# way to _just_ extract files from one of those.
#
-# pywin32 doesn't have this problem as it now uses
-# a standard distutils 'bdist_wininst' installation .exe. These executables are
-# valid .zip files with a "PLATLIB" directory being the complete directory
-# structure as installed into "site-packages". These recent pywin32 builds have
-# no dependencies on registry settings etc so will work directly as copied out
of
-# the .exe. The only concerns are the pywintypes/pythoncom dlls, which is
-# handled by the Inno installer
+# For pywin32 (previously known as win32all), the Windows installer must be
+# in tmp/.
+#
+# Nothing beyond those is required to build Python, and you don't even need
+# a compiler.
+PYVERSION_MAJOR := 2
+PYVERSION_MINOR := 4
+PYVERSION_PATCH := 2
+W32ALLVERSION := 205
-PYDIRNAME=Python-$(PYVERSION)
-# Standard bdist_wininst name - eg: pywin32-203.win32-py2.3[.exe]
-W32ALLDIRNAME=pywin32-$(W32ALLVERSION).win32-py$(PYVERSION_MAJOR).$(PYVERSION_MINOR)
-W32EXCLUDE=*.chm
+PYVERSION := $(PYVERSION_MAJOR).$(PYVERSION_MINOR).$(PYVERSION_PATCH)
+PYMAJORMINOR := python$(PYVERSION_MAJOR)$(PYVERSION_MINOR)
+
+# This is the default directory into which a Python installs.
+WIN_PYINSTALLEDDIR := \$(PYMAJORMINOR)
+
+# pywin32 now uses a standard distutils 'bdist_wininst' installation .exe.
+# These executables are valid .zip files with a "PLATLIB" directory being
+# the complete directory structure as installed into "site-packages". These
+# recent pywin32 builds have no dependencies on registry settings etc so
+# will work directly as copied out of the .exe. The only concerns are the
+# pywintypes/pythoncom dlls, which are handled by the Inno installer.
+
+PYDIRNAME := Python-$(PYVERSION)
+# Standard bdist_wininst name - eg: pywin32-203.win32-py2.3
+W32ALLDIRNAME :=
pywin32-$(W32ALLVERSION).win32-py$(PYVERSION_MAJOR).$(PYVERSION_MINOR)
+W32EXCLUDE := *.chm
+
# The Python tarball is extracted to PYSRCDIR.
-# The contents of the Python installer get extracted to PYEXTRACTDIR.
-# The " " " win32all " " " " W32EXTRACTDIR.
-PYSRCDIR=$(BASE_DIR)/src/$(PYDIRNAME)
-PYEXTRACTDIR=$(BASE_DIR)/src/$(PYDIRNAME)-extract
-W32EXTRACTDIR=$(BASE_DIR)/src/$(W32ALLDIRNAME)
+# pywin32 is extracted to W32EXTRACTDIR.
+PYSRCDIR := $(BASE_DIR)/src/$(PYDIRNAME)
+W32EXTRACTDIR := $(BASE_DIR)/src/$(W32ALLDIRNAME)
-WIN_PYSRCDIR=$(shell cygpath -w $(PYSRCDIR))
-WIN_PYEXTRACTDIR=$(shell cygpath -w $(PYEXTRACTDIR))
-WIN_W32EXTRACTDIR=$(shell cygpath -w $(W32EXTRACTDIR))
+WIN_PYSRCDIR := $(shell cygpath -w $(PYSRCDIR))
+WIN_W32EXTRACTDIR := $(shell cygpath -w $(W32EXTRACTDIR))
-PYTHON_REQUIRED_FILES=tmp/$(W32ALLDIRNAME).exe \
- tmp/$(PYDIRNAME).tgz \
- tmp/$(PYDIRNAME).exe
+PYTHON_REQUIRED_FILES := tmp/$(W32ALLDIRNAME).exe \
+ tmp/$(PYDIRNAME).tgz
# Arbitrary files from each of the installers and tarballs, to use as
# targets to force them to get unpacked.
-ARB_PYSRCDIR=$(PYSRCDIR)/PCbuild/pcbuild.dsw
-ARB_PYEXTRACTDIR=$(PYEXTRACTDIR)/zlib.pyd
-ARB_W32EXTRACTDIR=$(W32EXTRACTDIR)/PLATLIB
+ARB_PYSRCDIR := $(PYSRCDIR)/PCbuild/pcbuild.dsw
+ARB_W32EXTRACTDIR := $(W32EXTRACTDIR)/PLATLIB
# Building Python just consists of extracting files.
-build_python: $(ARB_PYSRCDIR) $(ARB_PYEXTRACTDIR) $(ARB_W32EXTRACTDIR)
+build_python: $(ARB_PYSRCDIR) $(ARB_W32EXTRACTDIR)
# Installing Python consists of copying oodles of files into
# $(BUILD_DIR).
@@ -67,21 +62,27 @@
clean_python:
$(RMRF) $(PYSRCDIR)
- $(RMRF) $(PYEXTRACTDIR)
clean_libs:
$(RMRF) $(W32EXTRACTDIR)
+# Fetch dependencies
+tmp:
+ $(MKDIR) tmp
+
+tmp/$(W32ALLDIRNAME).exe: tmp
+ $(CURL) -o tmp/$(W32ALLDIRNAME).exe
http://easynews.dl.sourceforge.net/sourceforge/pywin32/$(W32ALLDIRNAME).exe
+ $(TOUCH) tmp/$(W32ALLDIRNAME).exe
+
+tmp/$(PYDIRNAME).tgz: tmp
+ $(CURL) -o tmp/$(PYDIRNAME).tgz
http://python.org/ftp/python/$(PYVERSION)/$(PYDIRNAME).tgz
+ $(TOUCH) tmp/$(PYDIRNAME).tgz
+
$(ARB_PYSRCDIR): tmp/$(PYDIRNAME).tgz
$(MKDIR) "$(SRC_DIR)"
$(CD) "$(SRC_DIR)" && $(TAR) xvzf ../tmp/$(PYDIRNAME).tgz
$(TOUCH) "$(ARB_PYSRCDIR)"
-$(ARB_PYEXTRACTDIR): tmp/$(PYDIRNAME).exe
- $(MKDIR) "$(PYEXTRACTDIR)"
- "tmp/$(PYDIRNAME).exe" /S /X "$(WIN_PYEXTRACTDIR)"
- $(TOUCH) "$(ARB_PYEXTRACTDIR)"
-
# unzip warns about .exe not being exactly a .zip, then succeeds in
# extracting the files, then returns with exit != 0 - ignore exit code
$(ARB_W32EXTRACTDIR): tmp/$(W32ALLDIRNAME).exe
@@ -96,10 +97,9 @@
$(CP) "$(MAKEFILEDIR)/doc/ZC_PY_DIST_README.txt" "$(BUILD_DIR)/doc"
$(CP) "$(PYSRCDIR)/LICENSE" "$(BUILD_DIR)/doc/PYTHON_LICENSE.txt"
unix2dos "$(BUILD_DIR)/doc/PYTHON_LICENSE.txt"
+ $(CP) "$(SRC_DIR)/$(W32ALLDIRNAME)/PLATLIB/pythonwin/License.txt" \
+ "$(BUILD_DIR)/doc/PYWIN32_LICENSE.txt"
- $(MKDIR) "$(BUILD_DIR)/bin/DLLs"
- $(XCOPY) "$(WIN_PYEXTRACTDIR)\*.pyd" "$(WIN_BUILD_DIR)\bin\DLLs"
-
$(MKDIR) "$(BUILD_DIR)/bin/Lib"
$(XCOPY) "$(WIN_PYSRCDIR)\Lib\*.py" "$(WIN_BUILD_DIR)\bin\Lib"
$(MKDIR) "$(BUILD_DIR)/bin/Lib/site-packages"
@@ -115,13 +115,17 @@
$(XCOPY) "$(WIN_PYSRCDIR)\Include\*.h" "$(WIN_BUILD_DIR)\bin\Include"
$(XCOPY) "$(WIN_PYSRCDIR)\PC\*.h" "$(WIN_BUILD_DIR)\bin\Include"
+ $(MKDIR) "$(BUILD_DIR)/bin"
$(MKDIR) "$(BUILD_DIR)/bin/libs"
- $(CP) "$(PYEXTRACTDIR)/python23.lib" "$(BUILD_DIR)/bin/libs"
+ $(MKDIR) "$(BUILD_DIR)/bin/DLLs"
+ $(XCOPY) "$(WIN_PYINSTALLEDDIR)\python.exe" "$(WIN_BUILD_DIR)\bin"
+ $(XCOPY) "$(WIN_PYINSTALLEDDIR)\pythonw.exe" "$(WIN_BUILD_DIR)\bin"
+ $(XCOPY) "$(WIN_PYINSTALLEDDIR)\w9xpopen.exe" "$(WIN_BUILD_DIR)\bin"
+ $(XCOPY) "$(WIN_PYINSTALLEDDIR)\$(PYMAJORMINOR).dll" \
+ "$(WIN_BUILD_DIR)\bin"
+ $(XCOPY) "$(WIN_MAKEFILEDIR)\bin\msvcr71.dll" "$(WIN_BUILD_DIR)\bin"
+ $(XCOPY) "$(WIN_PYINSTALLEDDIR)\libs" "$(WIN_BUILD_DIR)\bin\libs"
+ $(XCOPY) "$(WIN_PYINSTALLEDDIR)\DLLs\*.pyd" \
+ "$(WIN_BUILD_DIR)\bin\DLLs"
- $(MKDIR) "$(BUILD_DIR)/bin"
- $(CP) "$(PYEXTRACTDIR)/pythonw.exe" "$(BUILD_DIR)/bin"
- $(CP) "$(PYEXTRACTDIR)/w9xpopen.exe" "$(BUILD_DIR)/bin"
- $(CP) "$(PYEXTRACTDIR)/python23.dll" "$(BUILD_DIR)/bin"
- $(CP) "$(PYEXTRACTDIR)/python.exe" "$(BUILD_DIR)/bin"
$(TOUCH) "$(BUILD_DIR)/bin/python.exe"
-
Modified: Zope/branches/2.9/inst/WinBuilders/mk/zope.mk
===================================================================
--- Zope/branches/2.9/inst/WinBuilders/mk/zope.mk 2006-01-27 01:40:29 UTC
(rev 41459)
+++ Zope/branches/2.9/inst/WinBuilders/mk/zope.mk 2006-01-27 01:40:46 UTC
(rev 41460)
@@ -1,3 +1,6 @@
+ZOPEVERSION := 2.9.0
+ZOPEDIRNAME := Zope-$(ZOPEVERSION)
+
ZOPE_REQUIRED_FILES=tmp/$(ZOPEDIRNAME).tgz
REQUIRED_FILES=$(PYTHON_REQUIRED_FILES)\
@@ -3,53 +6,68 @@
$(ZOPE_REQUIRED_FILES)
-ZOPEVERSION=2.9.0-final
-ZOPEDIRNAME=Zope-$(ZOPEVERSION)
-
-MAKEZOPE="$(MAKEFILEDIR)/bin/makezope.bat" "$(WIN_BUILD_DIR)"
-# run the Zope tests
-test_zope:
- $(CD) "$(BASE_DIR)/src/Zope"
- "$(PYPCBUILDDIR)/python.exe" utilities/testrunner.py -a
- $(CD) "$(BASE_DIR)"
-
clean_zope:
$(RMRF) src/$(ZOPEDIRNAME)
-install_zope: src/$(ZOPEDIRNAME)/inst/configure.py \
- $(BUILD_DIR)/lib/python/version.txt install_python \
+install_zope: src/$(ZOPEDIRNAME)/install.py \
+ install_python \
+ $(BUILD_DIR)/lib/python/Zope2/version.txt \
$(BUILD_DIR)/Zope-$(ZOPEVERSION)-win32.exe
ESCAPED=$(shell sh $(MAKEFILEDIR)/bin/escape.sh '$(WIN_MAKEFILEDIR)')
SEDSCRIPT="s@<<VERSION>>@$(ZOPEVERSION)@g;s@<<MAKEFILEDIR>>@$(ESCAPED)@g"
-$(BUILD_DIR)/Zope-$(ZOPEVERSION)-win32.exe: $(BUILD_DIR)/lib/python/version.txt
+$(BUILD_DIR)/Zope-$(ZOPEVERSION)-win32.exe:
$(BUILD_DIR)/lib/python/Zope2/version.txt
$(SED) $(SEDSCRIPT) < "$(MAKEFILEDIR)/etc/zope.iss.in" | unix2dos >
"$(BUILD_DIR)/zope.iss"
- # Remove CVS directories from the build tree.
+ # Remove CVS directories and compiled Python files from the build tree.
find $(BUILD_DIR) -name CVS -type d -exec $(RMRF) {} \; -prune
+ find $(BUILD_DIR) -name "*.pyc" -o -name "*.pyo" | xargs $(RM)
# Convert text files to Windows line ends. unix2dos has the nice
# property that it leaves lines with \r\n alone, so it doesn't hurt
# to do this on files already converted to Windows convention.
- find $(BUILD_DIR) -name "*.py" -o -name "*.txt" -o -name "*.bat" | \
- xargs unix2dos
+ find $(BUILD_DIR) -name "*.bat" | xargs unix2dos
+ find $(BUILD_DIR) -name "*.conf" | xargs unix2dos
+ find $(BUILD_DIR) -name "*.html" | xargs unix2dos
+ find $(BUILD_DIR) -name "*.in" | xargs unix2dos
+ find $(BUILD_DIR) -name "*.py" | xargs unix2dos
+ find $(BUILD_DIR) -name "*.stx" | xargs unix2dos
+ find $(BUILD_DIR) -name "*.txt" | xargs unix2dos
+ find $(BUILD_DIR) -name "*.xml" | xargs unix2dos
+ find $(BUILD_DIR) -name "*.zcml" | xargs unix2dos
# Build the Inno installer.
$(CD) "$(BUILD_DIR)";"$(ISS_COMPILER)" /cc "$(WIN_BUILD_DIR)\zope.iss"
-$(BUILD_DIR)/lib/python/Zope2/Startup/run.py:
- $(CD) "$(BUILD_DIR)"; \
- bin/python.exe \
- "$(WIN_SRC_DIR)\$(ZOPEDIRNAME)\inst\configure.py" \
- --prefix="$(WIN_BUILD_DIR)" --no-compile
- $(MAKEZOPE)
- $(TOUCH) "$(BUILD_DIR)/lib/python/Zope2/Startup/run.py"
+# This builds Zope, then installs it into the build directory, then
+# creates lib/python/Zope2/version.txt in the build directory.
+#
+# Yuck: for whatever reason, distutils refuses to allow an absolute
+# path for the --home option, so this hardcodes "build" as the name of
+# the build directory, and assumes "build" is a sibling of SRC_DIR.
+#
+# Yuck: the --no-compile option here has no effect: the install step
+# creates oodles of unwanted .pyc files. They're removed by the
+# $(BUILD_DIR)/Zope-$(ZOPEVERSION)-win32.exe target, though, before
+# building the installer.
+#
+# Yuck: no matter what I pass to --install-headers, it throws away the
+# last path component. We actually want to copy the Zope/ZODB headers
+# into bin/Include. The "nonsense" at the end gets thrown away, and that
+# smells like a bug. When it gets fixed, I suppose this will copy the
+# headers to bin/Include/nonsense/.
+$(BUILD_DIR)/lib/python/Zope2/version.txt: $(BUILD_DIR)/bin/python.exe
+ cd "$(SRC_DIR)/$(ZOPEDIRNAME)" && \
+ "$<" install.py install --no-compile --home=../../build \
+ --install-headers=../../build/bin/Include/nonsense
+ echo Zope $(ZOPEVERSION) > $@
+ $(TOUCH) $@
-$(BUILD_DIR)/lib/python/version.txt:
$(BUILD_DIR)/lib/python/Zope2/Startup/run.py
- @echo Zope $(ZOPEVERSION) > "$(BUILD_DIR)/lib/python/version.txt"
- $(TOUCH) "$(BUILD_DIR)/lib/python/version.txt"
+tmp/$(ZOPEDIRNAME).tgz:
+ $(CURL) -o tmp/$(ZOPEDIRNAME).tgz
http://www.zope.org/Products/Zope/$(ZOPEVERSION)/$(ZOPEDIRNAME).tgz
+ $(TOUCH) tmp/$(ZOPEDIRNAME).tgz
-src/$(ZOPEDIRNAME)/inst/configure.py:
+# This merely unpacks the Zope tarball.
+src/$(ZOPEDIRNAME)/install.py: tmp/$(ZOPEDIRNAME).tgz
$(MKDIR) "$(SRC_DIR)"
- $(CD) "$(SRC_DIR)" && $(TAR) xvzf ../tmp/$(ZOPEDIRNAME).tgz \
- && $(TOUCH) $(ZOPEDIRNAME)/inst/configure.py
+ $(CD) "$(SRC_DIR)" && $(TAR) xvzf ../tmp/$(ZOPEDIRNAME).tgz
_______________________________________________
Zope-Checkins maillist - Zope-Checkins@zope.org
http://mail.zope.org/mailman/listinfo/zope-checkins
