At the o/s command prompt, type: ps -eLf
You should see a listing which contains some zope/python entries if zope is
running.
If zope is not running try starting zope with the command: ./zopectl fg
this should allow you to see any errors that are generated while zope tries
to start up.
hth
Jonathan
----- Original Message -----
From: "russ" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; <zope@zope.org>
Sent: Wednesday, July 05, 2006 11:05 AM
Subject: RE: [Zope] Zope installation woes
Hi Jake,
Firstly I'll just mention a little bit more about the server. We have
cPanel and Apache running. There's a number of accounts setup in cPanel
and
I've tried to access Zope via one of these urls (www.domain.tld:8080) but
to
no avail. I've also tried the IP of the server with no luck. I don't
know
what else to try now, as I mentioned before I'm completely new to all of
this stuff so it's quite a steep learning curve. I also don't know what
you
mean by "use top" :S
Thanks for your reply BTW.
R.
-----Original Message-----
From: Jake [mailto:[EMAIL PROTECTED]
Sent: 05 July 2006 15:56
To: russ
Cc: zope@zope.org
Subject: Re: [Zope] Zope installation woes
It looks like it is already running. Use top and look for a process called
"python".
Did you try the url in a browser on port 8080?
Jake
_______________________
http://www.ZopeZone.com
On Wed, July 5, 2006 10:31 am, russ said:
Hello Zopesters,
Firstly, I must say that I'm completely new to this as I usually develop
front-end stuff, so excuse my ignorance. Right... that's out of the
way -
I
have been trying to install Zope on a server I have access to via SSH.
I've
followed the instructions for installing it from source found here:
http://plone.org/documentation/how-to/setup-from-source
I've got as far as making an instance and then attempting to start Zope.
First of all I got this:
[EMAIL PROTECTED] [~]# /usr/local/zope/instance3/bin/runzope
/usr/local/zope/zope2.9.3/lib/python/ZServer/utils.py:33:
DeprecationWarning: The zLOG package is deprecated and will be removed in
Zope 2.11. Use the Python logging module instead.
LOG('ZServer', severity[type], message)
/usr/local/zope/zope2.9.3/lib/python/Signals/SignalHandler.py:39:
DeprecationWarning: The zLOG package is deprecated and will be removed in
Zope 2.11. Use the Python logging module instead.
zLOG.LOG('Z2', zLOG.BLATHER, "Installed sighandler for %s" % (
...and then nothing :-| I tried running it again & got the following:
<snipped output>
ZConfig.ConfigurationError: There was a problem starting a server of type
"HTTPS erver". This may mean that your user does not have permission to
bind
to the por t which the server is trying to use or the port may already be
in
use by another application. (Address already in use)
The log file reports it's running, yet I cannot seem to access the start
page from http://myserverip:8080.
I don't know what to do next? Can anyone please help me out?
:(
R.
_______________________________________________
Zope maillist - Zope@zope.org
http://mail.zope.org/mailman/listinfo/zope
** No cross posts or HTML encoding! **
(Related lists -
http://mail.zope.org/mailman/listinfo/zope-announce
http://mail.zope.org/mailman/listinfo/zope-dev )
_______________________________________________
Zope maillist - Zope@zope.org
http://mail.zope.org/mailman/listinfo/zope
** No cross posts or HTML encoding! **
(Related lists -
http://mail.zope.org/mailman/listinfo/zope-announce
http://mail.zope.org/mailman/listinfo/zope-dev )
_______________________________________________
Zope maillist - Zope@zope.org
http://mail.zope.org/mailman/listinfo/zope
** No cross posts or HTML encoding! **
(Related lists -
http://mail.zope.org/mailman/listinfo/zope-announce
http://mail.zope.org/mailman/listinfo/zope-dev )