hi dave, i don't know about using the SERDES as ADC's.
paul horowitz and andrew howard used the xilinx LVDS inputs as flash ADC comparators sampling at about 1 Gsps, they built thousands of multilevel ADC's, biasing one input of each comparator at different DC levels using a resistor divider chain. they found the LVDS inputs have high bandwidth (but not nearly as high as the serdes inputs), and they have have low offset and the offset is fairly stable with temperature. i think this work is written up in a chapter in andrew howard's thesis. best wishes, dan Dan Werthimer Marilyn and Watson Alberts Chair Astronomy Dept and Space Sciences Lab University of California, Berkeley On Thu, Apr 25, 2019 at 9:37 AM 'Hawkins, David W (334B)' via casper@lists.berkeley.edu <casper@lists.berkeley.edu> wrote: > Hi All, > > > > Has anyone on the CASPER list investigated using the Xilinx transceivers > as 1-bit ADCs? > > > > Transceiver receivers can be kept coherent to a reference clock by > configuring the receiver clock-and-data-recovery unit not to recover the > clock from the incoming data stream. > > > > There are some people in the GPS section here at JPL that are interested > in using the transceivers for 1-bit sampling of GPS signals. They were > interested if there was any published literature on this. I have a vague > recollection of a CASPER-related grad student investigating this … but do > not recall his name … making it a little hard to use Google as a backup for > my memory. > > > > Thanks! > > Regards, > > Dave Hawkins. > > > > > > > > -- > You received this message because you are subscribed to the Google Groups " > casper@lists.berkeley.edu" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to casper+unsubscr...@lists.berkeley.edu. > To post to this group, send email to casper@lists.berkeley.edu. > -- You received this message because you are subscribed to the Google Groups "casper@lists.berkeley.edu" group. To unsubscribe from this group and stop receiving emails from it, send an email to casper+unsubscr...@lists.berkeley.edu. To post to this group, send email to casper@lists.berkeley.edu.