http://qa.mandrakesoft.com/show_bug.cgi?id=2666
------- Additional Comments From [EMAIL PROTECTED] 2003-11-17 22:01 ------- Installed the MDK 9.2 Powerpak from scratch. I have ALL bugs fixes, security patches and updates (as of 11/16/2003) installed. Here are the problems. Mustek MFC-600S is detected properly and installs nicely, except the GIMP still offers the TV Card as a SCSI device too. The AC97/SoundBlaster Live! problem is WORSE in 9.2. I have my onboard soundchip, the AC97, disabled in BIOS and I have a PCI SoundBlaster Live! 512 card installed. An audio out cable from the ATI Wonder TV card connects to the SB Live AUX IN socket. In 8.2 and 9.1 releases I could choose the audigy driver and the correct version of kmix would be deployed, allowing me to turn on the recording mode for AUX IN, which would allow sound from the TV card to be heard. In 9.2 neither the emu10k nor the audigy driver will bring up the correct mixer. Instead of the 12 slider SB version which has active recording lights, I get the 40+ slider AC97 version of the mixer and NONE of the recording lights will activate. I took out the SB Live card and activated the AC97 soundchip. MDK offered two drivers. The first wouldn't work at all. The second drove the CPU utilization to near 100% and after a few moments it aborts with a dialog reporting that fact. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------- Reminder: ------- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: I am running an Athlon 1GHz box with 512 MB RAM. I have an ATI Rage 128 video card and I have an ATI Wonder TV card. MDK 8.2 correctly assigned the r128 driver. MDK 9.1 rc 1 MMC will only assign tht ATI Rage 128 TVOUT driver even if I do manual configuration. It gets worse. I also have an NCR53c810 scsi attached to a Mustek MFC-600S scanner. MCC thinks the bttv card is a scsi device. When I run the Scanner configurator under MCC it assigns the bttv card to the Mustek, even though I select the Musteck from the list of scanners. I had to manually copy the mustek.conf from my MDK 8.2 installation in order for XSane to see the Musteck correctly.
