http://qa.mandrakesoft.com/show_bug.cgi?id=2666
------- Additional Comments From [EMAIL PROTECTED] 2003-18-11 13:10 ------- On Tuesday 18 November 2003 05:20 am, [tvignaud] wrote: Actually, it 'healed' itself by not just rebooting, but by doing a cold boot. I don't remember the number of times I set and reset both the emu10k and the audigy drivers with every permutation I could think of. We had predictions of bad weather for the night so I turned the computer off and unplugged it. (Sure enough, thunderstorms and severe lightning with a tornado on the ground! - Lincoln, 11/17/2003) . When I turned on the computer the correct kmix was showing and I could turn on the record button for LINE IN. I got sound out of my TV card. Things are back to normal. I replaced the ATI Rage Video card with an NVIDIA GeForce2 MX400 and it works great! Thanks for all your help! -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------- Reminder: ------- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: I am running an Athlon 1GHz box with 512 MB RAM. I have an ATI Rage 128 video card and I have an ATI Wonder TV card. MDK 8.2 correctly assigned the r128 driver. MDK 9.1 rc 1 MMC will only assign tht ATI Rage 128 TVOUT driver even if I do manual configuration. It gets worse. I also have an NCR53c810 scsi attached to a Mustek MFC-600S scanner. MCC thinks the bttv card is a scsi device. When I run the Scanner configurator under MCC it assigns the bttv card to the Mustek, even though I select the Musteck from the list of scanners. I had to manually copy the mustek.conf from my MDK 8.2 installation in order for XSane to see the Musteck correctly.
