HOW AWESOME! A response from the Master.
Thank you so much, Patrick. I tried it and it works!
Thanks for the help!
John KB2HSH
--- In digitalradio@yahoogroups.com, "Patrick Lindecker" <f6...@...> wrote:
>
> Hello,
>
> Once "Answer" pushed, if it is not a selective call, Multipsk must detect
> the CQ and automatically transmits to establish the handshaking with the
> "Master".
>
> If you did not transmit, it means that the CQ was not decoded.
>
> Here are some hints:
>
> - It is strongly recommended to calibrate the sound-card: click on the
> "Adjustments" menu button, then select the "Determination of the RX/TX
> sound-card sampling frequencies" option and push on the "Determination of
> the 48 KHz RX sampling frequency (test on 3 minutes)" button. At the end of
> the test, click on "Return",
> Note about the sound level ("Level" indication in % at the top of the
> screen): an AF level superior or equal to 10 % is OK. About 50 % is ideal
> (but not critical). In case of very low AF level, select "16 bits" in the
> "Determination of the RX/TX sound-card sampling frequencies" option
> ("Adjustments" menu button),
>
> Check this and try again.
>
> 73
> Patrick
>
>
> ----- Original Message -----
> From: "kb2hsh" <kb2...@...>
> To: <digitalradio@yahoogroups.com>
> Sent: Thursday, May 20, 2010 2:57 PM
> Subject: [digitalradio] Transmitting in ALE400
>
>
> > Perhaps I am missing something, but yesterday, I attempted to answer a CQ
> > from KA1GMN and I couldn't get Multi to transmit. I did have the ANSWER
> > key pressed. But, it still didn't work.
> >
> > HELP?
> >
> > KB2HSH
> >
> >
> >
> > ------------------------------------
> >
> > http://www.obriensweb.com/digispotter.html
> > Chat, Skeds, and "spots" all in one (resize to suit)Yahoo! Groups Links
> >
> >
> >
> >
>
