Forget about it. THink of the converter as a 10 kW Pulse RDIO TRANSMITTER. Unless car is designed from ground up to eliminate EMI, it just is impossible.
Bob On Wed, Oct 13, 2021 at 7:48 PM nathan christiansn via EV <ev@lists.evdl.org> wrote: > > Hello Everyone, > > I have a Geo Metro that I converted electric and the radio has never been > able to pick up more than one station because of all the noise the dc-dc > converter outputs. I have been able to verify that the noise is being > picked up through the 12 volt input of the radio and not through the > antenna. I have tried putting a large line-voltage EMI filter on the output > of the dc-dc converter and it did not do anything. I also tried putting a > large capacitor on the output and experienced similar results. > > Is there anyone out there who has had a similar issue and found a solution? > Any ideas would be appreciated. > > Nathan > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20211013/4079cbce/attachment.html> > _______________________________________________ > Address messages to ev@lists.evdl.org > No other addresses in TO and CC fields > UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub > ARCHIVE: http://www.evdl.org/archive/ > LIST INFO: http://lists.evdl.org/listinfo.cgi/ev-evdl.org _______________________________________________ Address messages to ev@lists.evdl.org No other addresses in TO and CC fields UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub ARCHIVE: http://www.evdl.org/archive/ LIST INFO: http://lists.evdl.org/listinfo.cgi/ev-evdl.org
