Thanks all for the quick responses on the question (always a good sign of this mailing list).
(Tim Dawson, Manuel Wolfshant): Regarding root cause of my current problem pointing to a faulty battery, this is not the first time that someone points to it. However I made a simple test with the vendor tools (Windows) and didn't found any issue, as well as they discharged normally (although only tested without load). I have no other ways to test the battery themselves, I'm not quite electricity-tech to make some hackish testing (and dangerous). (David Zomaya). Regarding Tripplite, I found many active threads on the mailing list so I consider it everytime as an alternative, however those devices are a bit pro/expensive too and they are harder to get/find support on my country compared with other vendors. However feel free to suggest a model like the Ellipse ECO 1200VA (in power and price). Also I found many reports of NUT working devices on the mailing list which are not reported on the HCL (https://networkupstools.org/stable-hcl.html) which makes me ask if this list is maintained/updated as well as the acknowledges section (https://networkupstools.org/acknowledgements.html) As Bartosz pointed out, I think many of us would like to know of recommended vendors either for their products quality or for their support to NUT project. Regards Missatge de Marc Franquesa <marc.franqu...@gmail.com> del dia dl., 17 d’ag. 2020 a les 12:32: > Sorry, because this is not a technical question rather than a Hardware > advice/recommendation. > > I have been using NUT-UPS perfectly for more than 7 years using two > different Eaton/MGE models. > > After a battery replacement (replaced 1 year ago) after 5 years of > service, my current unit seems to behave faulty, as just after 1-2 minutes > of power outage, shows the LB battery flag and sets FSD although having > enough battery charge and runtime. > > I'm now looking to replace the UPS, but after comparing various vendors > and models (and check against the HCL) I found that the Eaton ones are > quite more expensive than other vendors/models. > > I'm thinking to move to a cheaper model, but still have a good device/NUT > support, mainly usb-hid or blazer-usb drivers. > > For one side I'm happy with Eaton, however they are quite expensive, and > although in the past supported NUT development I'm not sure if this is > still the same collaborative support. > > On the other hand I'm looking to get a Salicru SPS, I've read some good > (and also some bad) reviews of the devices but would like to know of any > NUT-user experience. > > So could anyone with experience regarding Salicru/blazer-ups with NUT ? > > Should I give them a try or better stick with Eaton as well supported and > good device? > > Thanks >
_______________________________________________ Nut-upsuser mailing list Nut-upsuser@alioth-lists.debian.net https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser