2007/4/17, Kjell Claesson <[EMAIL PROTECTED]>:
...
> Network UPS Tools - UPS driver controller 2.0.5
> Network UPS Tools - BCMXCP UPS driver 0.11 (2.0.5)
>
> Communications with UPS lost: Error executing command
> Communications with UPS lost: Error executing command
> Communications with UPS lost: Error executing command
> Communications with UPS re-established
> Connected to UPS on /dev/ttyS0 baudrate: 9600
> Model = HP R3000 XR 3000VA
> Firmware = Inve:01.09 Netw:03.60
> Shutdown delay = 120 seconds
> #
>
> It all seems to work but the initial errors or warnings concern me. I'm
> running stable 2.05 built from source.
This come from the baudhunting function in the driver.
If you set the baud_rate in the ups.conf to 9600 You don't get this
errors.
...
can't this be filtered to avoid user confusion?
Arnaud
--
Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
Debian Developer - http://people.debian.org/~aquette/
OpenSource Developer - http://arnaud.quette.free.fr/
_______________________________________________
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
