Hello, I'm testing the latest pixma support against the TS6150 which is listed as not yet tested.
I can't connect over USB or TCP even if I explicitly place my device's IP address in /etc/sane.d/pixma.conf as follows:- bjnp-timeout=5000 bjnp://192.168.0.100:8612 I am running on Ubuntu 18.04.1 and have built from the latest source in master branch of https://gitlab.com/sane-project/backends. The compilation is with debug and I get the following output pasted below. The device is working since I am able to scan in an incredibly limited fashion using the official scangearmp2 (which I have since uninstalled). The device also works if I reboot to windows. ---------------------------------------------- giles@gklinux:~/github/backends$ SANE_DEBUG_PIXMA=21 SANE_DEBUG_BJNP=3 simple-scan (simple-scan:15264): Gtk-WARNING **: 17:10:07.715: Failed to register client: GDBus.Error:org.gnome.SessionManager.AlreadyRegistered: Unable to register client [sanei_debug] Setting debug level of pixma to 21. [pixma] pixma is compiled with pthread support. [pixma] pixma version 0.17.49 [sanei_debug] Setting debug level of bjnp to 3. [bjnp] sanei_bjnp_find_devices, pixma backend version: 0.17.49 [bjnp] Set new default timeout value: 5000 ms.[bjnp] sanei_bjnp_find_devices: Adding scanner from pixma.conf: bjnp:// 192.168.0.100:8612 [bjnp] bjnp_allocate_device(bjnp://192.168.0.100:8612/timeout=5000) 0 [bjnp] get_scanner_name: Name for 192.168.0.100 not found : Name or service not known [bjnp] setup_udp_socket: Setting up a UDP socket, dest: 192.168.0.100 port 8612 [bjnp] udp_command: ERROR - recv failed: Connection refused[bjnp] udp_command: ERROR - recv failed: Connection refused[bjnp] udp_command: ERROR - recv failed: Connection refused[bjnp] udp_command: ERROR - no data received (timeout = 5000) [bjnp] bjnp_init_device_structure: Cannot read mac address, skipping this scanner [bjnp] bjnp_allocate_device: Scanner not yet in our list, added it: 192.168.0.100:8612 [bjnp] setup_udp_socket: Setting up a UDP socket, dest: 192.168.0.100 port 8612 [bjnp] udp_command: ERROR - recv failed: Connection refused[bjnp] udp_command: ERROR - recv failed: Connection refused[bjnp] udp_command: ERROR - recv failed: Connection refused[bjnp] udp_command: ERROR - no data received (timeout = 5000) [bjnp] get_scanner_id: ERROR - Failed to retrieve scanner identity: [bjnp] add_scanner: ERROR - Cannot read scanner make & model: bjnp:// 192.168.0.100:8612/timeout=5000 [bjnp] sanei_bjnp_find_devices: Added all configured scanners, now do auto detection... [bjnp] prepare_socket: lo is not a valid IPv4 interface, skipping... [bjnp] prepare_socket: eno1 is IPv4 capable, sending broadcast, socket = 50 [bjnp] prepare_socket: lo is not a valid IPv6 interface, skipping... [bjnp] prepare_socket: eno1 is IPv6 capable, sending broadcast, socket = 51 [bjnp] prepare_socket: eno1 is IPv6 capable, sending broadcast, socket = 52 [bjnp] prepare_socket: eno1 is IPv6 capable, sending broadcast, socket = 53 [bjnp] sanei_find_devices: scanner discovery finished... [pixma] pixma_find_scanners() found 0 devices
-- sane-devel mailing list: sane-devel@alioth-lists.debian.net https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to sane-devel-requ...@lists.alioth.debian.org