Hi Rolf, I now have tried your latest driver from your OOA on a clean install of Ubuntu.
In this case I cannot see the scanner at all. Can you advise as to possible reasons for this? See log below. Many thanks, giles. ------------------------ ubuntu@ubuntu:~$ SANE_DEBUG_PIXMA=21 simple-scan (simple-scan:11145): Gtk-WARNING **: 19:11:42.614: Failed to register client: GDBus.Error:org.gnome.SessionManager.AlreadyRegistered: Unable to register client [sanei_debug] Setting debug level of pixma to 21. [pixma] pixma is compiled with pthread support. [pixma] pixma version 0.17.51 [pixma] pixma_find_scanners() found 0 devices [pixma] pixma_find_scanners() found 0 devices ^C ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ lsusb Bus 002 Device 005: ID 04a9:1822 Canon, Inc. Bus 002 Device 008: ID 046d:c077 Logitech, Inc. M105 Optical Mouse On Thursday, 13 September 2018, Giles Knap <gilesk...@gmail.com> wrote: > OK, I repeated the test with wireless LAN disabled on the scanner (it has > no ethernet connection). > > The results are the same (except this time I did not turn on BJNP > debugging - if I do then the output is identical to previously). > > See below. > > Thanks, > giles > > ------------------------ > > giles@gklinux:~$ SANE_DEBUG_PIXMA=21 simple-scan > > (simple-scan:4156): Gtk-WARNING **: 20:44:50.832: Failed to register > client: GDBus.Error:org.gnome.SessionManager.AlreadyRegistered: Unable to > register client > [sanei_debug] Setting debug level of pixma to 21. > [pixma] pixma is compiled with pthread support. > [pixma] pixma version 0.17.50 > [pixma] pixma_collect_devices() found Canon PIXMA TS6100 Series at > libusb:002:005 > [pixma] pixma_find_scanners() found 1 devices > > -------- I hit the "scan" button in simple scan here ---------- > > [pixma] pixma_collect_devices() found Canon PIXMA TS6100 Series at > libusb:002:005 > [pixma] pixma_open(): Canon PIXMA TS6100 Series > [pixma] pixma_connect() failed EBUSY > [pixma] pixma_open() failed EBUSY > [pixma] pixma_close(): Canon PIXMA TS6100 Series > giles@gklinux:~$ > > > On Thu, Sep 13, 2018 at 5:18 PM Rolf Bensch <r...@bensch-online.de> wrote: > >> Hi Giles, >> >> As I mentioned before, very probably your scanner cannot be used via >> Ethernet and WiFi. Please retry scanning via USB connection. Then you >> should remove the Ethernet cable and/or disable WiFi. >> >> Hope this helps. >> >> Cheers, >> Rolf >> >> Am 12.09.2018 um 23:21 schrieb Giles Knap: >> > Thanks Rolf, >> > >> > I was immediately able to see the scanner but unfortunately when I try >> > to scan I get an error. I have tried power cycling the scanner and >> > restarting ubuntu but get the following:- >> > >> > Thanks, >> > giles. >> > -------------------------------- >> > giles@gklinux:~$ SANE_DEBUG_PIXMA=21 SANE_DEBUG_BJNP=3 simple-scan >> > >> > (simple-scan:15292): Gtk-WARNING **: 22:19:23.217: Failed to register >> > client: GDBus.Error:org.gnome.SessionManager.AlreadyRegistered: Unable >> > to register client >> > [sanei_debug] Setting debug level of pixma to 21. >> > [pixma] pixma is compiled with pthread support. >> > [pixma] pixma version 0.17.50 >> > [sanei_debug] Setting debug level of bjnp to 3. >> > [pixma] pixma_collect_devices() found Canon PIXMA TS6100 Series at >> > libusb:002:005 >> > [bjnp] sanei_bjnp_find_devices, pixma backend version: 0.17.50 >> > [bjnp] sanei_bjnp_find_devices: No devices specified in configuration >> file. >> > [bjnp] sanei_bjnp_find_devices: Added all configured scanners, now do >> > auto detection... >> > [bjnp] prepare_socket: lo is not a valid IPv4 interface, skipping... >> > [bjnp] prepare_socket: eno1 is IPv4 capable, sending broadcast, socket >> = 23 >> > [bjnp] prepare_socket: lo is not a valid IPv6 interface, skipping... >> > [bjnp] prepare_socket: eno1 is IPv6 capable, sending broadcast, socket >> = 24 >> > [bjnp] prepare_socket: eno1 is IPv6 capable, sending broadcast, socket >> = 25 >> > [bjnp] prepare_socket: eno1 is IPv6 capable, sending broadcast, socket >> = 26 >> > [bjnp] sanei_find_devices: scanner discovery finished... >> > [pixma] pixma_find_scanners() found 1 devices >> > [pixma] pixma_collect_devices() found Canon PIXMA TS6100 Series at >> > libusb:002:005 >> > [bjnp] sanei_bjnp_find_devices, pixma backend version: 0.17.50 >> > [bjnp] sanei_bjnp_find_devices: No devices specified in configuration >> file. >> > [bjnp] sanei_bjnp_find_devices: Added all configured scanners, now do >> > auto detection... >> > [bjnp] prepare_socket: lo is not a valid IPv4 interface, skipping... >> > [bjnp] prepare_socket: eno1 is IPv4 capable, sending broadcast, socket >> = 23 >> > [bjnp] prepare_socket: lo is not a valid IPv6 interface, skipping... >> > [bjnp] prepare_socket: eno1 is IPv6 capable, sending broadcast, socket >> = 24 >> > [bjnp] prepare_socket: eno1 is IPv6 capable, sending broadcast, socket >> = 25 >> > [bjnp] prepare_socket: eno1 is IPv6 capable, sending broadcast, socket >> = 26 >> > [bjnp] sanei_find_devices: scanner discovery finished... >> > [pixma] pixma_open(): Canon PIXMA TS6100 Series >> > [pixma] pixma_connect() failed EBUSY >> > [pixma] pixma_open() failed EBUSY >> > [pixma] pixma_close(): Canon PIXMA TS6100 Series >> > >> > >> > On Wed, Sep 12, 2018 at 9:14 PM Rolf Bensch <r...@bensch-online.de >> > <mailto:r...@bensch-online.de>> wrote: >> > >> > Hi Giles, >> > >> > I just added your scanner to SANE. You can pull the recent version >> from >> > git now. >> > >> > Or you can use my Ubuntu PPA: >> > https://launchpad.net/~rolfbensch/+archive/ubuntu/sane-git >> > <https://launchpad.net/%7Erolfbensch/+archive/ubuntu/sane-git> . >> > Then you >> > must wait for the next version tomorrow. >> > >> > Please report your results. >> > >> > Cheers, >> > Rolf >> > >> > Am 12.09.2018 um 20:40 schrieb Giles Knap: >> > > Many thanks, Rolf. >> > > >> > > I would be very happy to have my scanner working via USB. >> > > >> > > The USB IDs are as follows:- >> > > Bus 002 Device 005: ID 04a9:1822 Canon, Inc. >> > > >> > > Cheers, >> > > giles >> > > >> > > On Wed, Sep 12, 2018 at 6:41 PM Rolf Bensch < >> r...@bensch-online.de >> > <mailto:r...@bensch-online.de> >> > > <mailto:r...@bensch-online.de <mailto:r...@bensch-online.de>>> >> wrote: >> > > >> > > Hi Giles, >> > > >> > > I'm sorry to tell you that your scanner isn't supported by >> > SANE. You >> > > confuse your TS6150 with the TS6050 (PIXMA TS6000 Series). >> > > >> > > There's another problem with the tested TSxxxx scanners: WiFi >> > isn't >> > > working. >> > > >> > > I can quickly implement your scanner to SANE, but you very >> > probably >> > > need to use the scanner USB connected to your PC. Please send >> me >> > > your scanner's USB IDs, which can be indentified on a console >> > with: >> > > $ lsusb >> > > Bus 002 Device 007: ID 04a9:1908 Canon, Inc. >> > > ... >> > > >> > > Hope this helps. >> > > >> > > Cheers, >> > > Rolf >> > > >> > > >> > > Am 03.09.2018 um 18:30 schrieb Giles Knap: >> > >> Hello, >> > >> >> > >> I'm testing the latest pixma support against the TS6150 >> which is >> > >> listed as not yet tested. >> > >> >> > >> I can't connect over USB or TCP even if I explicitly place my >> > >> device's IP address in /etc/sane.d/pixma.conf as follows:- >> > >> >> > >> bjnp-timeout=5000 >> > >> bjnp://192.168.0.100:8612 <http://192.168.0.100:8612> >> > <http://192.168.0.100:8612> >> > >> >> > >> I am running on Ubuntu 18.04.1 and have built from the latest >> > >> source in master branch >> > of https://gitlab.com/sane-project/backends. >> > >> >> > >> The compilation is with debug and I get the following output >> > >> pasted below. >> > >> >> > >> The device is working since I am able to scan in an >> incredibly >> > >> limited fashion using the official scangearmp2 (which I have >> > since >> > >> uninstalled). The device also works if I reboot to windows. >> > >> >> > >> ---------------------------------------------- >> > >> giles@gklinux:~/github/backends$ SANE_DEBUG_PIXMA=21 >> > >> SANE_DEBUG_BJNP=3 simple-scan >> > >> >> > >> (simple-scan:15264): Gtk-WARNING **: 17:10:07.715: Failed to >> > >> register client: >> > >> GDBus.Error:org.gnome.SessionManager.AlreadyRegistered: >> Unable to >> > >> register client >> > >> [sanei_debug] Setting debug level of pixma to 21. >> > >> [pixma] pixma is compiled with pthread support. >> > >> [pixma] pixma version 0.17.49 >> > >> [sanei_debug] Setting debug level of bjnp to 3. >> > >> [bjnp] sanei_bjnp_find_devices, pixma backend version: >> 0.17.49 >> > >> [bjnp] Set new default timeout value: 5000 ms.[bjnp] >> > >> sanei_bjnp_find_devices: Adding scanner from pixma.conf: >> > >> bjnp://192.168.0.100:8612 <http://192.168.0.100:8612> >> > <http://192.168.0.100:8612> >> > >> [bjnp] >> > bjnp_allocate_device(bjnp://192.168.0.100:8612/timeout=5000 >> > <http://192.168.0.100:8612/timeout=5000> >> > >> <http://192.168.0.100:8612/timeout=5000>) 0 >> > >> [bjnp] get_scanner_name: Name for 192.168.0.100 not found : >> Name >> > >> or service not known >> > >> [bjnp] setup_udp_socket: Setting up a UDP socket, dest: >> > >> 192.168.0.100 port 8612 >> > >> [bjnp] udp_command: ERROR - recv failed: Connection >> refused[bjnp] >> > >> udp_command: ERROR - recv failed: Connection refused[bjnp] >> > >> udp_command: ERROR - recv failed: Connection refused[bjnp] >> > >> udp_command: ERROR - no data received (timeout = 5000) >> > >> [bjnp] bjnp_init_device_structure: Cannot read mac address, >> > >> skipping this scanner >> > >> [bjnp] bjnp_allocate_device: Scanner not yet in our list, >> added >> > >> it: 192.168.0.100:8612 <http://192.168.0.100:8612> >> > <http://192.168.0.100:8612> >> > >> [bjnp] setup_udp_socket: Setting up a UDP socket, dest: >> > >> 192.168.0.100 port 8612 >> > >> [bjnp] udp_command: ERROR - recv failed: Connection >> refused[bjnp] >> > >> udp_command: ERROR - recv failed: Connection refused[bjnp] >> > >> udp_command: ERROR - recv failed: Connection refused[bjnp] >> > >> udp_command: ERROR - no data received (timeout = 5000) >> > >> [bjnp] get_scanner_id: ERROR - Failed to retrieve scanner >> > identity: >> > >> [bjnp] add_scanner: ERROR - Cannot read scanner make & model: >> > >> bjnp://192.168.0.100:8612/timeout=5000 >> > <http://192.168.0.100:8612/timeout=5000> >> > >> <http://192.168.0.100:8612/timeout=5000> >> > >> [bjnp] sanei_bjnp_find_devices: Added all configured >> > scanners, now >> > >> do auto detection... >> > >> [bjnp] prepare_socket: lo is not a valid IPv4 interface, >> > skipping... >> > >> [bjnp] prepare_socket: eno1 is IPv4 capable, sending >> broadcast, >> > >> socket = 50 >> > >> [bjnp] prepare_socket: lo is not a valid IPv6 interface, >> > skipping... >> > >> [bjnp] prepare_socket: eno1 is IPv6 capable, sending >> broadcast, >> > >> socket = 51 >> > >> [bjnp] prepare_socket: eno1 is IPv6 capable, sending >> broadcast, >> > >> socket = 52 >> > >> [bjnp] prepare_socket: eno1 is IPv6 capable, sending >> broadcast, >> > >> socket = 53 >> > >> [bjnp] sanei_find_devices: scanner discovery finished... >> > >> [pixma] pixma_find_scanners() found 0 devices >> > >> >> > > >> > >> >
-- sane-devel mailing list: sane-devel@alioth-lists.debian.net https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to sane-devel-requ...@lists.alioth.debian.org