Re: [digitalradio] Its the busy detect, stupid.
Andy, It would be most helpful to know how much QRM gets through if you use a 500 Hz-wide IF filter and use a center frequency 250 Hz from the top of a Pactor-III channel. Perhaps the problem is trying to use too wide an IF filter. 73, Skip KH6TY
[digitalradio] Re: jt65-hf program
--- In digitalradio@yahoogroups.com, Mike Liller n7...@... wrote: Andy, I read your guide to JT-65-HF that I found on the web...One question...I have 2 soundcards, one for music etc and the second for the soundcard more ham stuff. How do I configure the second soundcard and inputs/outputsin the options? Hi Mike, You have to set the prefered Input/Ouput Audio Device on the Station Setup Menu, then you can configure the audio level by Control Panel Audio and so on (I have Italian Windows and i don't know how says the English... hi hi). In my PC i set the minimum output level for output (wave or master volume) and about the 30% for input. Then if you need QRO or QRP adjust the mic gain in the RIG and to adjust the Input level you can use the Digital Audio Gain on the top-left of software main panel. I remember the JT65-HF Links: To join the JT65-HF Yahoo Group: http://groups.google.com/group/jt65-hf?hl=en To donwload the software and the setup/use guide: http://www.iz4czl.ucoz.com/index/000/0-28 SRI for my poor english. 73 de Alex, IZ4CZL
[digitalradio] Re: jt65-hf program
--- In digitalradio@yahoogroups.com, Alex iz4...@... wrote: --- In digitalradio@yahoogroups.com, Mike Liller n7nms@ wrote: Andy, I read your guide to JT-65-HF that I found on the web...One question...I have 2 soundcards, one for music etc and the second for the soundcard more ham stuff. How do I configure the second soundcard and inputs/outputsin the options? Hi Mike, You have to set the prefered Input/Ouput Audio Device on the Station Setup Menu, then you can configure the audio level by Control Panel Audio and so on (I have Italian Windows and i don't know how says the English... hi hi). In my PC i set the minimum output level for output (wave or master volume) and about the 30% for input. Then if you need QRO or QRP adjust the mic gain in the RIG and to adjust the Input level you can use the Digital Audio Gain on the top-left of software main panel. I remember the JT65-HF Links: To join the JT65-HF Yahoo Group: http://groups.google.com/group/jt65-hf?hl=en To donwload the software and the setup/use guide: http://www.iz4czl.ucoz.com/index/000/0-28 SRI for my poor english. 73 de Alex, IZ4CZL The JT65-HF group is by Google and not by Yahoo.. SRI http://groups.google.com/group/jt65-hf?hl=en 73 de Alex, IZ4CZL
[digitalradio] Re: jt65-hf program
You select the sound card you want to use after you click on Station Setup which is at the bottom left of the JT65 screen. Welcome to JT65-HF Jon --- In digitalradio@yahoogroups.com, Alex iz4...@... wrote: --- In digitalradio@yahoogroups.com, Alex iz4czl@ wrote: --- In digitalradio@yahoogroups.com, Mike Liller n7nms@ wrote: Andy, I read your guide to JT-65-HF that I found on the web...One question...I have 2 soundcards, one for music etc and the second for the soundcard more ham stuff. How do I configure the second soundcard and inputs/outputsin the options? Hi Mike, You have to set the prefered Input/Ouput Audio Device on the Station Setup Menu, then you can configure the audio level by Control Panel Audio and so on (I have Italian Windows and i don't know how says the English... hi hi). In my PC i set the minimum output level for output (wave or master volume) and about the 30% for input. Then if you need QRO or QRP adjust the mic gain in the RIG and to adjust the Input level you can use the Digital Audio Gain on the top-left of software main panel. I remember the JT65-HF Links: To join the JT65-HF Yahoo Group: http://groups.google.com/group/jt65-hf?hl=en To donwload the software and the setup/use guide: http://www.iz4czl.ucoz.com/index/000/0-28 SRI for my poor english. 73 de Alex, IZ4CZL The JT65-HF group is by Google and not by Yahoo.. SRI http://groups.google.com/group/jt65-hf?hl=en 73 de Alex, IZ4CZL
Re: [digitalradio] Re: jt65-hf program
Thanks Jon. I didn't see the port audio window at first. It wa under another window. Sent from my U.S. Cellular BlackBerry® smartphone -Original Message- From: jon_g4fut jon_g4...@fastmail.co.uk Sender: digitalradio@yahoogroups.com Date: Fri, 02 Jul 2010 09:32:04 To: digitalradio@yahoogroups.com Reply-To: digitalradio@yahoogroups.com Subject: [digitalradio] Re: jt65-hf program You select the sound card you want to use after you click on Station Setup which is at the bottom left of the JT65 screen. Welcome to JT65-HF Jon --- In digitalradio@yahoogroups.com, Alex iz4...@... wrote: --- In digitalradio@yahoogroups.com, Alex iz4czl@ wrote: --- In digitalradio@yahoogroups.com, Mike Liller n7nms@ wrote: Andy, I read your guide to JT-65-HF that I found on the web...One question...I have 2 soundcards, one for music etc and the second for the soundcard more ham stuff. How do I configure the second soundcard and inputs/outputsin the options? Hi Mike, You have to set the prefered Input/Ouput Audio Device on the Station Setup Menu, then you can configure the audio level by Control Panel Audio and so on (I have Italian Windows and i don't know how says the English... hi hi). In my PC i set the minimum output level for output (wave or master volume) and about the 30% for input. Then if you need QRO or QRP adjust the mic gain in the RIG and to adjust the Input level you can use the Digital Audio Gain on the top-left of software main panel. I remember the JT65-HF Links: To join the JT65-HF Yahoo Group: http://groups.google.com/group/jt65-hf?hl=en To donwload the software and the setup/use guide: http://www.iz4czl.ucoz.com/index/000/0-28 SRI for my poor english. 73 de Alex, IZ4CZL The JT65-HF group is by Google and not by Yahoo.. SRI http://groups.google.com/group/jt65-hf?hl=en 73 de Alex, IZ4CZL
[digitalradio] the kchibo New Item Kchibo D6110 only USD 34.75
Kchibo D6110 new item. like the kchibo d96l. the use the AAA Battery, DIY Feature, DSP IC. very good the quality. and reasonable the prince. the buy url:http://www.trafind.com/product_info.php?cPath=102products_id=874
Re: [digitalradio] Its the busy detect, stupid.
Good point. The early Winmor beta testing advice was to was to keep all DSP off but yesterday I used it to rid myself of some CW QRM and had no issues. I am finding Winmor does quite well with QRM unless the QRM is of a long duration. So, for example, ALE soundings don't always cause major damage. Where they do cause damage is where there is a marginal Winmor transfer taking place and the path is so poor that you are on the brink of timing out, however you are managing a few good acks to keep the QSO alive. Then along comes an ALE sounding that disrupts the marginal path and lasts long enough to time you out. I have had that happen a few times JUST as a file was about to complete. I will narrow things a tad and see what happens. Andy K3UK On Fri, Jul 2, 2010 at 4:06 AM, KH6TY kh...@comcast.net wrote: Andy, It would be most helpful to know how much QRM gets through if you use a 500 Hz-wide IF filter and use a center frequency 250 Hz from the top of a Pactor-III channel. Perhaps the problem is trying to use too wide an IF filter. 73, Skip KH6TY
[digitalradio] Need help setting up a K'wood TS 2000
This morning UPS brought my SignaLink USB. I've got it connected thru the 13 pin ACC port in back. I'm using Air Link EXpress. I can get it to decode the signal, but when I click on tune, my ptt light doesn't turn on. It must be something I haven't done on the radio. Any Ideas? Thanks in advance 73 Bill N8VWI
Re: [digitalradio] Re: [digitalradio ]Multipsk ???? Final Call for Papers--2010 ARRL/TAPR Digital Communications Conference
Hello Andy, Yes I could concatenate several papers about RS ID and Call ID and present the result. 73 Patrick - Original Message - From: Andy obrien To: digitalradio@yahoogroups.com Sent: Friday, July 02, 2010 3:48 AM Subject: [digitalradio] Re: [digitalradio ]Multipsk Final Call for Papers--2010 ARRL/TAPR Digital Communications Conference Hmm, I wonder if Patrick has thought about publishing his work with RS-ID? On Thu, Jul 1, 2010 at 4:29 PM, Ford, Steve, WB8IMY sf...@arrl.org wrote: Technical papers are solicited for presentation at the 29th Annual ARRL and TAPR Digital Communications Conference to be held September 24-26, 2010 near Portland, Oregon. These papers will also be published in the Conference Proceedings (you do NOT need to attend the conference to have your paper included in the Proceedings). The submission deadline is July 31, 2010. Please send papers to: Maty Weinberg ARRL 225 Main St Newington, CT 06111 or you can make your submission via e-mail to: m...@arrl.org Papers will be published exactly as submitted and authors will retain all rights. 73 . . . Steve, WB8IMY ARRL
Re: [digitalradio] Need help setting up a K'wood TS 2000
I think I found the problem. I forgot to change mode from usb to fsk. Atleast the red light comes on now..Bill N8VWI
[digitalradio] Re: Need help setting up a K'wood TS 2000
I don't think you've solved the problem because Ailink Express uses USB as do most digital modes. --- In digitalradio@yahoogroups.com, greathoun...@... wrote: I think I found the problem. I forgot to change mode from usb to fsk. Atleast the red light comes on now..Bill N8VWI
Re: [digitalradio] Re: Need help setting up a K'wood TS 2000
OK, well I guess I didn't then. I can't get it to display the band and save the info on top of the page. I did save all the info in the set up portion. Thanks Bill N8VWI In a message dated 7/2/2010 5:28:05 P.M. Eastern Daylight Time, jon_g4...@fastmail.co.uk writes: I don't think you've solved the problem because Ailink Express uses USB as do most digital modes. --- In _digitalra...@yahoogroups.com_ (mailto:digitalradio@yahoogroups.com) , greathoun...@... wrote: I think I found the problem. I forgot to change mode from usb to fsk. Atleast the red light comes on now..Bill N8VWI
Re: [digitalradio] Re: [digitalradio ]Multipsk ???? Final Call for Papers--2010 ARRL/TAPR Digital Communications Conference
Great. let me know if you nee any help with English words. Andy K3Uk On Fri, Jul 2, 2010 at 3:47 PM, Patrick Lindecker f6...@free.fr wrote: Hello Andy, Yes I could concatenate several papers about RS ID and Call ID and present the result. 73 Patrick - Original Message - *From:* Andy obrien k3uka...@gmail.com *To:* digitalradio@yahoogroups.com *Sent:* Friday, July 02, 2010 3:48 AM *Subject:* [digitalradio] Re: [digitalradio ]Multipsk Final Call for Papers--2010 ARRL/TAPR Digital Communications Conference Hmm, I wonder if Patrick has thought about publishing his work with RS-ID? On Thu, Jul 1, 2010 at 4:29 PM, Ford, Steve, WB8IMY sf...@arrl.orgwrote: Technical papers are solicited for presentation at the 29th Annual ARRL and TAPR Digital Communications Conference to be held September 24-26, 2010 near Portland, Oregon. These papers will also be published in the Conference Proceedings (you do NOT need to attend the conference to have your paper included in the Proceedings). The submission deadline is July 31, 2010. Please send papers to: Maty Weinberg ARRL 225 Main St Newington, CT 06111 or you can make your submission via e-mail to: m...@arrl.orgmaty%40arrl.org Papers will be published exactly as submitted and authors will retain all rights. 73 . . . Steve, WB8IMY ARRL
[digitalradio] ohio digital
any ohio digital scanner here ?
Re: [digitalradio] Need help setting up a K'wood TS 2000
I do not know about the SignaLink really, but if you have it connected correctly to the rear accessory port, there is nothing you need to do with the radio. When the PTT line is grounded, it enters TX mode. Thus, I would look into either your software setup (look for a PTT com port and/or DTR/RTS high/low type setup) or possibly the SignaLink cable setup (if it's anything like the RigBlaster that has jumpers you have to setup correctly. Also, you may want to check out the TS-2000 group: http://groups.yahoo.com/group/KenwoodTS-2000/ ... I belong there and they may be able to help as well... but I really think it's software or the SignaLink setup. Jeremy KB8LFA http://www.kb8lfa.com On 7/2/2010 3:19 PM, greathounder wrote: This morning UPS brought my SignaLink USB. I've got it connected thru the 13 pin ACC port in back. I'm using Air Link EXpress. I can get it to decode the signal, but when I click on tune, my ptt light doesn't turn on. It must be something I haven't done on the radio. Any Ideas? Thanks in advance 73 Bill N8VWI
