Hello,
Once Answer pushed, if it is not a selective call, Multipsk must detect
the CQ and automatically transmits to establish the handshaking with the
Master.
If you did not transmit, it means that the CQ was not decoded.
Here are some hints:
- It is strongly recommended to calibrate the sound-card: click on the
Adjustments menu button, then select the Determination of the RX/TX
sound-card sampling frequencies option and push on the Determination of
the 48 KHz RX sampling frequency (test on 3 minutes) button. At the end of
the test, click on Return,
Note about the sound level (Level indication in % at the top of the
screen): an AF level superior or equal to 10 % is OK. About 50 % is ideal
(but not critical). In case of very low AF level, select 16 bits in the
Determination of the RX/TX sound-card sampling frequencies option
(Adjustments menu button),
Check this and try again.
73
Patrick
- Original Message -
From: kb2hsh kb2...@amsat.org
To: digitalradio@yahoogroups.com
Sent: Thursday, May 20, 2010 2:57 PM
Subject: [digitalradio] Transmitting in ALE400
Perhaps I am missing something, but yesterday, I attempted to answer a CQ
from KA1GMN and I couldn't get Multi to transmit. I did have the ANSWER
key pressed. But, it still didn't work.
HELP?
KB2HSH
http://www.obriensweb.com/digispotter.html
Chat, Skeds, and spots all in one (resize to suit)Yahoo! Groups Links