Of course nobody can say what their OEQs were without breaking NDA. The ones
I got were hard for me because I was weak in those areas. I did not feel
that all of them were 'CCNP' level questions but that is my opinion. I'm not
weak in those areas any longer. I sat for my test back on August 26th.
At least you aren't taking your lab at RTP! Those dudes start EARLY out
there (7:30) and it is East Coast time. I feel sorry for the folks
traveling from the West Coast to take it - must be brutal.
Well, good luck!! Let us know how it goes!
p.s. Does the proctor in San Jose talk about his
Mike
Karma is based on hard work. Rewards always come after hard work.
Keep up hard study.
You can do it!!!
From: mich...@thelipseys.com
To: erik.fairbanks@fe.navy.mil; ccie_rs@onlinestudylist.com
Date: Tue, 27 Oct 2009 23:21:44 -0700
Subject: Re: [OSL | CCIE_RS]
Hi Raj,
During the troubleshooting lab you do at Cisco you will have access to
ALL commands. It might though that in a particular question you are
prohibited to use some show commands. We do that in some of our labs
so we force you to use a different troubleshooting method. This will
I can say that I didn't have any restrictions on what commands I could or
couldn't use. The lab does state that you are graded on getting a working
solution and that you shouldn't make large sweeping changes, I.e. Replace RIP
with OSPF. I don't remember the exact wording, but that was th
Great feedback!!!
Too bad you did not make it ...
I hope next time will be better for you ... and the slice of pizza
will not be that expensive.
--
Regards,
Iwan Hoogendoorn
CCIE #13084 (RS / Security / SP)
Sr. Support Engineer – IPexpert, Inc.
URL: http://www.IPexpert.com
On Mon, Oct 26,
Here is the reasoning for NOT using show run while learning how to
troubleshoot, if you learn to use the appropriate show and debug
commands, you should find the trouble much quicker than if you have to
rely on reading through the entire configuration on several routers.
Something that has helped
Good luck with your attempt!
--
Regards,
Iwan Hoogendoorn
CCIE #13084 (RS / Security / SP)
Sr. Support Engineer – IPexpert, Inc.
URL: http://www.IPexpert.com
On Tue, Oct 27, 2009 at 11:36 PM, Tunde Kushimo kush...@yahoo.com wrote:
Hi Fabio,
Many thanks for the wonderful lab experience
en
conf t
hostname HUB
int lo0
ip add 1.1.1.1 255.255.255.255
int s0
enc frame
no shu
no frame inverse-arp
ip add 172.16.1.1 255.255.255.0
frame-relay map ip 172.16.1.2 102 b
frame-relay map ip 172.16.1.3 103 b
router eigrp 100
no auto
net 172.16.1.1 0.0.0.0
net 1.1.1.1 0.0.0.0
en
conf t
Did you turn off split horizon? Since you are not using sub-
interfaces, the router isnt going to send out any networks that it
heard on the same interface... Try turning off split horizon... That
might fix the issue.
no ip split-horizon eigrp #
HTHs a little
On Oct 28, 2009, at 8:55 AM,
Mustafa,
That doesn't sound quite right. Are you saying that EIGRP neighbor will not
come unless you remove network 2.2.2.2 from the spoke? Or are you saying
the route is not advertised to the other spoke?
On Wed, Oct 28, 2009 at 6:55 AM, Mustafa Yadav mustafa.ya...@gmail.comwrote:
en
conf t
HUB#
00:06:47: EIGRP: Sending HELLO on Loopback0
00:06:47: AS 100, Flags 0x0, Seq 0/0 idbQ 0/0 iidbQ un/rely 0/0
00:06:47: EIGRP: Received HELLO on Loopback0 nbr 1.1.1.1
00:06:47: AS 100, Flags 0x0, Seq 0/0 idbQ 0/0
00:06:47: EIGRP: Packet from ourselves ignored
00:06:49: %LINEPROTO-5-UPDOWN:
Hellos are sent on all packets covered under the network statements. Since
they are not needed on loopbacks, you can use passive-interface to prevent
them.
On Wed, Oct 28, 2009 at 8:36 AM, Mustafa Yadav mustafa.ya...@gmail.comwrote:
HUB#
00:06:47: EIGRP: Sending HELLO on Loopback0
00:06:47:
Thanks Bryan.I did as you said.It has worked.Sorry if my question is
too light for you gurus.
On 10/28/09, Bryan Bartik bbar...@ipexpert.com wrote:
Hellos are sent on all packets covered under the network statements. Since
they are not needed on loopbacks, you can use passive-interface to
Hi guys,
I have a weird situation.I am using GN3 for a hubspoke lab.I see my
pvcs in hub is flabbing between deleted and active.But there is no any
problem in spokes.Please have a look at below output.I see under sh
int a lot of missed LMI stats received.What can be a cause for this
problem?
So I was checking my ccie blogs and saw a snippet that Mark snow took off to
work for INE. So first it was Scott Morris and now Mark Snow now working for
INE. I guess some restructuring is going on at Ipexpert or something? Just
curious as to why he took off, if this is indeed true?
Curiosity
Mark Snow, dual CCIE (CCIE #14073) has joined Internetwork Expert as
a CCIE Voice Instructor. Mark brings years of teaching, technical
writing, and consulting experience to Internetwork Expert. Mark’s
certifications include two CCIEs, (Voice and Security), CCVP, CCNP,
CCDP, CSE,
Yea I just went to ine and found just as you were posting it ;) la la la.
Sent from my Verizon Wireless BlackBerry
-Original Message-
From: Adrian Brayton abray...@gmail.com
Date: Wed, 28 Oct 2009 15:13:44
To: nicholas goldennickst...@yahoo.com
Cc: ccie_rs@onlinestudylist.com
Subject:
Wow I just wondering why INE took all IPexpert trainer ? Hmmm but actually I
prefer Vik Malhi as my instructor when I go for my Voice next year after RS
:).
On Thu, Oct 29, 2009 at 2:20 AM, nickst...@yahoo.com wrote:
Yea I just went to ine and found just as you were posting it ;) la la la.
On Wed, Oct 28, 2009 at 3:08 PM, nicholas golden nickst...@yahoo.comwrote:
So I was checking my ccie blogs and saw a snippet that Mark snow took off
to work for INE. So first it was Scott Morris and now Mark Snow now working
for INE. I guess some restructuring is going on at Ipexpert or
I've seen this before. If you have these kind of layer 2 issues, stop
dynamips, delete the cache files (generated in your homefolder) and
restart it again.
--
Rick Mur
CCIE2 #21946 (RS, Service provider)
Sr. Support Engineer -- IPexpert, Inc.
Sent from my iPhone
On 28 okt 2009, at 19:40,
No questions is too light. You wouldn't believe some of the stuff that still
gets us stumped :)
On Wed, Oct 28, 2009 at 12:06 PM, Mustafa Yadav mustafa.ya...@gmail.comwrote:
Thanks Bryan.I did as you said.It has worked.Sorry if my question is
too light for you gurus.
On 10/28/09, Bryan
C'mon guys, get over it. The sky is not falling down. The ICT training
sector is no different to any other part of the industry; people
change jobs *all the time*. It's only that these people, within our
small geeky corner of the world, have a relatively high profile.
I have no doubt it's a
Where is Jared?! Did you hear a rumor of him leaving? He was my bootcamp
instructor. I thought he was bright and did a good job.
I am perfecting my Australian accent to pick up chicks! :)
-Original Message-
From: ccie_rs-boun...@onlinestudylist.com
Has anyone received this error while trying to print a lab book? This
is the first time I have tried to print
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Hey Erik. The PDFs have a limited number of times you can print them. What
happens is when you open up the document, it will contact a server online.
Are you connected to the net when trying to print? If you have not printed
the document at all yet, just contact our support team and they will
Anxiously awaiting ... : )
On Wed, Oct 28, 2009 at 7:43 AM, pra pa patelpr...@hotmail.com wrote:
Mike
Karma is based on hard work. Rewards always come after hard work.
Keep up hard study.
You can do it!!!
From: mich...@thelipseys.com
To: erik.fairbanks@fe.navy.mil;
I am currently behind a restrictive proxy and firewall...probably the
issue. I will try printing from another location. If I still have
problems, I will contact support.
Thanks!
-Erik
-Original Message-
From: Joe Astorino [mailto:jastor...@ipexpert.com]
Sent: Thursday, October 29,
Same here waiting to here back anxiously
Sent from my Verizon Wireless BlackBerry
-Original Message-
From: Joe Astorino jastor...@ipexpert.com
Date: Wed, 28 Oct 2009 23:01:08
To: pra papatelpr...@hotmail.com
Cc: ccie_rs@onlinestudylist.com; erik.fairbanks@fe.navy.mil;
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
I am using gn3 form my lab tests.After opening 3 or 4 console it seems
everything fine.Even I can work almost half an hour.But suddenly all
console windows dissapear and I am unable to log in again via console.
Has anyone encountered this kind of situation before?
Hey Mike,
Sorry to hear about the temporary setback buddy...you can bet we were all
rooting for you back here at IPexpert and the OSL. It sounds like you had
more of an issue with the GUI and the windows than you did with the actual
exam content though, so that should be encouraging. From what
Joe,
On the topic of the new v4 material, do you know of or have a list of
recommended reading for folks to get them up-to-speed for the new exam?
I saw an old blog post from Jared S. with a really good list for the v3
blueprint, but don't recall seeing anything for the new stuff (I may be
33 matches
Mail list logo
