I meant "golf" ball
Sent from my Android-based can on a string
Original message
From: Marek Dziedzic via CnC-List
Date: 2023-06-17 14:31 (GMT-05:00)
To: Stus-List
Cc: Marek Dziedzic
Subject: Stus-List Re: Diesel Fill Hose Replacement
A hold ball with a string (and a
What kind of batteries. I operate 4 100/30 Victon controllers with 10 panels.
2 feed a start / house bank of 5 group 21 100 amp start/ house batts. 2 feed a
bank of 2x 200ah lithium batteries that are dedicated to refer and 5cf chest
freezer.
Works well.
+1 for the Victron solar controller. I have 1 for each panel, and they talk
to each othrr.
Douglas Mountjoy
1988 LF 39
Mexico at large
1984 Sabre 34
Port Orchard, WA
On Sat, Jun 17, 2023, 11:11 Nathan Post via CnC-List
wrote:
> I am in the process of figuring out adding solar to my two bank
A hold ball with a string (and a shopvac) is also a good option
Marek
Sent from my Android-based can on a string
Original message
From: nausetbeach--- via CnC-List
Date: 2023-06-17 11:26 (GMT-05:00)
To: 'Stus-List'
Cc: nausetbe...@optonline.net
Subject: Stus-List Re:
I have the same (?) setup.
Morning Star has a MPPT version, as well. Mine is the old style (it is over 10
yo).
I like the remote (wired) monitor. It also has temperature probe option, which
might be useful for some.
One issue with my monitor is that one of the buttons stopped working
I am in the process of figuring out adding solar to my two bank setup
(start battery + house batteries) and have been looking at this one:
https://www.renogy.com/dcc50s-12v-50a-dc-dc-on-board-battery-charger-with-mppt/
as a possibility. However, it is relatively expensive and doesn't include
I put in a Morningstar Sunsaver Duo
(https://www.morningstarcorp.com/products/sunsaver-duo/) paired with a 50W
panel many years ago and it has worked perfectly ever since. Keeps my 2
batteries topped up while the boat is at the mooring. I got the one with the
separate output meter, which has
I am looking for feedback on dual output controllers.
I want to add a battery bank to my existing setup, but I have a single
controller now. It’s a Renogy Rover 20A and has worked fine; however, they
don’t offer a dual output controller currently.
Thanks in advance for your help!
Pete W.
I'd highly recommend trying to leave the new hose either out in the sun or
use a heat gun to get it as playable as you can without exceeding the rated
temperature
You can use soap and water on the exterior but doesn't usually help as much
and contra to what the heat will help with.
Same goes
Thank you all for the suggestions. Using a coupler is a great idea, and have
sourced one locally from HD, at an exorbitant price, $10. None of the local
Lowes, WM or marine stores had any in stock and this project will be attempted
tomorrow, so no time for shipping.
Will try to run a
Can you get at both ends? Send a messenger line inside, in case as Dennis
notes, something goes wrong. Then you at least still have the route through
everything.
Jon Tebbens
78 Mega
Katherine
On Sat, 17 Jun 2023, 08:23 Dennis C. via CnC-List
wrote:
> You're only going to get one shot if you
You're only going to get one shot if you tape it. If the tape comes loose,
you're cooked.
Get a barb coupling to attach old and new. Here's one for $4.
Hi Brian, get a friend to help. I like the tying the hoses together. One
push the other pull. Lay the hose in the sun for several hours.
When I did my hoses. I had to remove old before installing new. Tied a
string on old. Used this to help guide new. I could get to all the places
it went through
I need to replace the diesel fill hose which is routed behind cabinetry and
wanted to ask the list for some suggestions for pulling the new hose. [I
found diesel in the bilge and believe the 36+ yo fill hose is the culprit
if should be replaced anyway.] From the tank, the hose passes through a
14 matches
Mail list logo
