Hi.
linuxconf/netcong network routes config doesn't work in MDK 9.
linuxconf writes an /etc/sysconfig/static-routes file, while the new
/etc/sysconfig/network-scripts/ifup-routes script uses a different file
(/etc/sysconfig/network-script/route-if) and a different syntax (old
format commented
As of man-1.5k-2mdk, makewathis creates his indexes into
/var/cache/man/$LANG, but apropos (and whatis) searchs only into
/var/cache/man ...
I have exactly the same problem with the Shuttle SS51g :
onboard realtech 8139 (the chipset is SIS651)
The network chip is recognized, modules are loaded
(8139too mii) but network cannot initialize with both
static and DHCP IP address(time out on ifup eth0)
I already reported it for 9.0 RC2 and
On 21 Sep 2002, Bjarne Thomsen wrote:
I see that too with 9.0Rc3 and XFS.
If you watch the changelog list, you would see that this was fixed in the
latest kernel (-16mdk?).
Buchan
--
|Registered Linux User #182071-|
Buchan MilneMechanical
Many packages are signed with the key above, but it's missing from the
keys on cooker main page.
Is this an mdk key or is a personal key of some contributor ?
There is another keyfile somewhere with this key ?
Cheers
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I just did a fresh install of MDK 9.0 and have observered the following
problems:
1. For the first install I selected a expert install, selected auto partition
allocation with /usr, selected the software catagories to install, clicked
throught the
Hello,
I tried to install 9.0rc3 on a PC with just a SCSI cdrom. It was hanging
during the second stage install, just as 9.0rc2 did. Then I retried it
without expert mode and the whole install went fine. So what is
different between the normal and the expert mode?
Henk.
Hello,
gmumeric of 9.0rc3 crahses when you try to make it fullscreen. If not it
seems to ber working fine.
Henk.
On Fri, 2002-09-20 at 23:46, Felix Miata wrote:
I first reported this Mon, 09 Sep 2002 21:34:28 -0400 here on cooker and
got no response. The same thing herein described happened after
reinstalling 9.0RC2 two more times, and now again with 9.0RC3. IIRC,
this also happened in betas 2 and 3,
I will test RC3 tonight, but previous releases (RC1 and RC2) and also
LM 8.2 had broken Xfree86 4.2 with a ATI Mach64 VT. No matter what
resolution and color depth I choose, the result is a black screen
without image in the installation phase; also X refuse to start at
all. These
On Sat, 2002-09-21 at 02:01, Henk Elbers wrote:
Hello,
gmumeric of 9.0rc3 crahses when you try to make it fullscreen. If not it
seems to ber working fine.
Maximizes fine here: 1600x1200, I can see up to W:55.
Using current cooker:
gnumeric-1.0.9-1mdk
kernel-2.4.19-16mdk
=o=
kk1
Viestissä Perjantai 20. Syyskuuta 2002 15:37, Florin kirjoitti:
[EMAIL PROTECTED] (o beckles) writes:
Can Samba be added to the list of firewall services to allow?
you can do that in advanced options (137,138,139 ports) ... if you're
talking about drakfirewall ... but this will open these
On lördagen den 21 september 2002 05.40 Jean-Michel Dault wrote:
DOH!
I'm uploading 3mdk, which really fixes the problem this time.
He he, great!
Jean-Michel
Le ven 20/09/2002 à 11:54, Oden Eriksson a écrit :
[root@cooker i586]# php
php: relocation error:
On Fri, 2002-09-20 at 04:31, Digital Wokan wrote:
Mandrake is right to move it to PLF from a business point of view (and let's
face it, we all want to be paid for our work, no matter what that work is).
Of course, adding PLF to the list of software install sites for URPMI during
the use
On Fri, 2002-09-20 at 04:41, Digital Wokan wrote:
I just remembered after sending this that they don't officially support
contribs anyway, so why be worried about what shows up there, as long as it
isn't under an incompatible license.
Because of appearances. It's in some sense linked to
On lördagen den 21 september 2002 05.43 Jean-Michel Dault wrote:
Yes that would be cool if you came visiting.
Or you could come to Montreal ;-)
I can't afford the trip yet, still unemployed you know.
It *is* serious. Many e-commerce sites use some perl modules heavily,
and if they
At 09:58 PM 9/20/02 -0700, you wrote:
(...)
But this time I have a problem I use the network configuration tool
in drakconf (text mode). So I change the address for 10.0.0.1 and I
(a nouveauté) I have to choose wich card was an gateway. I really
don't need that now... anyway I choose the lan one,
On Sat, 2002-09-21 at 05:51, Felix Miata wrote:
Regarding the mouse, no one yet on the list has even made an applicable
suggestion. Someone did mention combining /usr onto the same partition
as /, but I don't use a separate /usr to combine, and I seriously doubt
that could possibly be a fix
The via-rhine driver loads, but no network access. Its now the hardware
as XP on the same box can access the LAN.
It may have something to do with driver using memory access rather than
I/O access. Memory access is the default.
Internet connection sharing on rc3
I have rc3
Realtek card
Configging ics, it gives me an ip of 192.168.1.1 (strange)
I am unable to use ICS as my millennium and 98 machines cannot see me on
the network.
When I try to configure the network manually. The settings revert to
192.168.1.1
When I try
On Sat, 2002-09-21 at 23:27, dave williams wrote:
Are there any clues?
Did you get the latest one from cooker? The one in RC3 was flawed. Or
else, comment out the duplicate entry loc in /etc/shorewall/interfaces,
restart shorewall and check it out :-)
Damon
Nvidia GeForce2 MS 400 w/ nvidia accelerated drivers at 4x agp and it
maximizes and goes back to normal just fine here. No hangs no crashes
just smooth sailing.
gnumeric-1.0.9-1mdk
kernel-2.4.9-13mdk-1-1mdk
David
On Sat, 2002-09-21 at 05:25, Quel Qun wrote:
On Sat, 2002-09-21 at 02:01, Henk
On Sat, 21 Sep 2002, rcc wrote:
I will test RC3 tonight, but previous releases (RC1 and RC2) and also
LM 8.2 had broken Xfree86 4.2 with a ATI Mach64 VT. No matter what
resolution and color depth I choose, the result is a black screen
without image in the installation phase; also X
Sorted it out last night, although I use HardDrake to set the OSS driver. I
think that ALSA just does not support SoundBlaster Live properly (along with
some other sound cards from what I gather in some of the other messages).
Other than that everything is looking OK, although I'm not using USB
Try installing the latest initscripts package from Cooker - that appears to
fix a lot of problems.
- Original Message -
From: Denis Bergeron [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, September 21, 2002 5:38 AM
Subject: [Cooker] rc3 BIG bug : No USB at all
I just install
Messages also appear when using XFS or ReiserFS on an SMP system.
- Original Message -
From: Norman Carver [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Friday, September 20, 2002 11:33 PM
Subject: Re: [Cooker] VFS Inodes Busy / 9.0 BETA - Bug report / Installation
I am also seeing
get minor error loading window manager sessions, insmod error.
figured out the cause is a lack of support for the cardbus pcmcia nic.
D-Link DFE-680TX
the specs from the card:
* Network Interface Specification*
* IEEE 802.3 10BASE-T standard 10BASE-T CSMA/CD LAN.
* IEEE 802.3u
On Fri, 20 Sep 2002, Norman Carver wrote:
problems). I cannot believe that others are not complaining about this since
I have reported it as well, as did various others. Read the list.
I also mailed to Juan that it is still not completly fixed. But people
seem to be quite busy fixing other
it isn't just the ati mach cards, got an old sis 6326 with 8mb and only
xfree 3.x runs it properly ( can get the xterm even with 4.x installed,
just down to 256 colors )
Stew Benedict wrote:
On Sat, 21 Sep 2002, rcc wrote:
I will test RC3 tonight, but previous releases (RC1 and RC2) and also
On Sat, 21 Sep 2002, Alan Hughes wrote:
Sorted it out last night, although I use HardDrake to set the OSS driver. I
think that ALSA just does not support SoundBlaster Live properly (along with
I disagree, because it works fine for some other people.
David may say it doesn't work but that is
On 19. sep 2002 21:06, Yura Gusev wrote:
Mandrake show translated GNU License in the begining of installation.
wrong, this is not gnu/gpl license, but mandrake's terms of conditions.
--
Linux 2.4.19-9mdk
Mandrake Linux release 9.0 (Cooker) for i586
2:29pm up 10 days, 19:50, 4 users, load
On 20 Sep 2002, Nathan A. Smith wrote:
** WARNING **: snd_mixer_attach: No such file or directory
This is the xmms-alsa plugin. What happens if you disable or remove it?
Note: ALSA needs to be active, otherwise this plugin will indeed cause
this behaviour.
I'm running Mandrake 9 RC3 on my laptop and my soundcard is listed as follows
from Harddrake:
Vendor: Cirrus Logic
Alternative drivers: cs46xx
Bus: PCI
Bus identification: 1013:6003:1071:6003
Location on the bus: 0:9:0
Description: CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator]
On Sat, 21 Sep 2002 07:47:52 -0400 (EDT)
Stew Benedict [EMAIL PROTECTED] wrote:
Must not be all Mach64VT's:
[root@larry root]# lspcidrake | grep ATI
Card:ATI Mach64 VT (264VT): ATI|264VT [Mach64 VT]
I used expert install, and manually selected 1024x768@16bpp.
X works fine. (RC2)
olivier == Olivier Thauvin [EMAIL PROTECTED] writes:
olivier Le Samedi 21 Septembre 2002 00:43, Olivier Thauvin a écrit :
Anyone notice that:
kernel-2.4.19.16mdk-1-1mdk.i586.rpm
kernel-headers-2.4.18-41mdk.i586.rpm
olivier OOps, I read my after this post, and someone explain to me.
alsa will run both my sound cards just fine, but if I use alsa then any
sound for kde or gnome doesn't work.
one card sb16 and the other is sbpro compatable ( crystal audio card )
[EMAIL PROTECTED] wrote:
On 20 Sep 2002, Nathan A. Smith wrote:
** WARNING **: snd_mixer_attach: No such file or
On 21 Sep 2002, Adam Williamson wrote:
On Fri, 2002-09-20 at 04:41, Digital Wokan wrote:
I just remembered after sending this that they don't officially support
contribs anyway, so why be worried about what shows up there, as long as it
isn't under an incompatible license.
Because of
An other problem occur with supermount while intalling
MS Office (throught CXoffice 1.2).
Install start, but during installation I have files
not found.
When trying to list files :
[celine@celine Office]$ cd /mnt/cdrom
[celine@celine cdrom]$ ls
autorun.inf MSOWC.CAB ows.msi
On Sat, 21 Sep 2002, dave williams wrote:
Internet connection sharing on rc3
I have rc3
Realtek card
Configging ics, it gives me an ip of 192.168.1.1 (strange)
Why strange? Any internal IP (192.168/16 or 10/8 or one of the 172
class Bs) is normal. So, MS uses 192.168.0/24 by default.
I
Hello,
Is that normal that kde apps try to load GL library, every time they are
launched ??
that may cause performance issues or not ?
--
Adrien
The cure:
rpm -e msec
--
Mandrake Linux release 9.0 (rc3) for i586. KDE: 3.0.3 Qt: 3.0.5
AMD Athlon(tm) XP 1600+ 512MB. Kernel: 2.4.19-13mdk. GCC 3.2
Linux user #275590 (http://counter.li.org/). up 18 min.
#=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=#
This is a new bug introduced by RC3.
The dialog says something like enter gateway if you want one but if you
leave it blank it tells you format is 1.2.3.4 and will not go any
further in the install until you give it one.
My connection to the outside world is via SpeedTouch ADSL USB modem so I
On Saturday 21 September 2002 04:06 am, Alastair Scott wrote:
On Fri, 2002-09-20 at 23:46, Felix Miata wrote:
I first reported this Mon, 09 Sep 2002 21:34:28 -0400 here on cooker and
got no response. The same thing herein described happened after
reinstalling 9.0RC2 two more times, and now
Ben Reser wrote:
On Sat, Sep 21, 2002 at 12:51:49AM -0400, Felix Miata wrote:
My bigger frustration is discovering problems that survive the official
release. I started beta testing on 8.1, then did 8.2 and now 9.0. Out of
many problems I reported, the only replies from anyone with an
On Saturday 21 September 2002 07:46 am, Brian Craft wrote:
I'm running Mandrake 9 RC3 on my laptop and my soundcard is listed as
follows from Harddrake:
Vendor: Cirrus Logic
Alternative drivers: cs46xx
Bus: PCI
Bus identification: 1013:6003:1071:6003
Location on the bus: 0:9:0
On Saturday 21 September 2002 10:14 am, Igor Izyumin wrote:
On Saturday 21 September 2002 07:46 am, Brian Craft wrote:
I'm running Mandrake 9 RC3 on my laptop and my soundcard is listed as
follows from Harddrake:
Vendor: Cirrus Logic
Alternative drivers: cs46xx
Bus: PCI
Bus
On Sat, 21 Sep 2002 08:52:03 -0400 (EDT)
Stew Benedict [EMAIL PROTECTED] wrote:
If X is actually running for you guys it sounds more like it's just
running at a vertical or horizontal frequency beyond what your
monitor/lcd can handle. Have you tried tweaking those freqeuncy
ranges?
maybe,
I just installed Mandrake 9.0 RC3 on fresh and the first thing I noticed
is that there are no sounds while KDE is starting up. I checked the
volumes with KMixer and they were all set to 0. I have Hercules Game
Theater XP. Here is copypaste from HardDrake:
Vendor: Cirrus Logic
Alternative
On lördagen den 21 september 2002 05.09 Jean-Michel Dault wrote:
Wow! You just have beaten me, I haven't tried mod_smbauth and mod_rpaf
yet ;-)
He he, there's more coming :)
--
Regards // Oden Eriksson
Deserve-IT Networks - http://d-srv.com
On Saturday 21 September 2002 10:32 am, Jure Repinc wrote:
I just installed Mandrake 9.0 RC3 on fresh and the first thing I noticed
is that there are no sounds while KDE is starting up. I checked the
volumes with KMixer and they were all set to 0. I have Hercules Game
Theater XP. Here is
Brian Craft wrote:
Open the KDE Control Center/Look N Feel/System Notifications/KDE System
Notifications/KDE is Starting up and KDE is Exiting and put a checkmark in
the startup and exit sounds.
These sounds are enabled by default for all users. But you missed my
point. The point is that
Alastair Scott wrote:
On Fri, 2002-09-20 at 23:46, Felix Miata wrote:
I first reported this Mon, 09 Sep 2002 21:34:28 -0400 here on cooker and
got no response. The same thing herein described happened after
reinstalling 9.0RC2 two more times, and now again with 9.0RC3. IIRC,
this
Igor Izyumin wrote:
On Saturday 21 September 2002 04:06 am, Alastair Scott wrote:
On Fri, 2002-09-20 at 23:46, Felix Miata wrote:
I first reported this Mon, 09 Sep 2002 21:34:28 -0400 here on cooker and
got no response. The same thing herein described happened after
reinstalling
At 05:09 AM 9/21/02 -0700, you wrote:
it isn't just the ati mach cards, got an old sis 6326 with 8mb and only
xfree 3.x runs it properly ( can get the xterm even with 4.x installed,
just down to 256 colors )
FWIW I use a 6326 with 8 Mb and Xfree 4 worked fine for me
under 8.2, and is still
Bret Baptist [EMAIL PROTECTED] writes:
I am curious who I need to contact about configuration settings for a
particular type of mouse. I have a Logitech Trackman MarbleFX. I have found
XF86Config settings to make the scroll button work. Who would I send this
information to so that
On Sat, 2002-09-21 at 16:26, rcc wrote:
On Sat, 21 Sep 2002 08:52:03 -0400 (EDT)
Stew Benedict [EMAIL PROTECTED] wrote:
If X is actually running for you guys it sounds more like it's just
running at a vertical or horizontal frequency beyond what your
monitor/lcd can handle. Have you
Only Fix half of the problem. My mouse work, but I not
my joystick, I don't have anything in /dev/usb/hid
I have to do a manuel insmod joydev to have my joytick
to work.
--- Alan Hughes [EMAIL PROTECTED] a
écrit : Try installing the latest initscripts
package from
Cooker - that appears to
(RC3 with up-to-date cooker)
Immediately any file type is selected in the left-hand pane (Gnome Menu
| Desktop Preferences | Advanced | File Types and Programs) this bombs
out with a core dump.
The gdb output, although unhelpful as far as I can see, is attached.
Alastair
[thebrix@localhost
I have a friend running RC2 with a DFE-670TXD, and
it's not locking up, but we can't get the network
working either. We found out that the xircom_cb
module loads (tulip doesn't, it's non-pcmcia, and
xircom_tulip_cb doesn't), and we put that in
modules.conf, and set up
--- [EMAIL PROTECTED] wrote:
On Sat, 21 Sep 2002, Alan Hughes wrote:
Sorted it out last night, although I use HardDrake
to set the OSS driver. I
think that ALSA just does not support SoundBlaster
Live properly (along with
I disagree, because it works fine for some other
people.
David
see bottom
--- Buchan Milne [EMAIL PROTECTED] wrote:
On 21 Sep 2002, Adam Williamson wrote:
On Fri, 2002-09-20 at 04:41, Digital Wokan wrote:
I just remembered after sending this that they
don't officially support
contribs anyway, so why be worried about what
shows up there, as long
I'm using 9.0 RC2 on an AMD K62 500mhz system. If I go in and out of
gnome-ppp several times(connecting each time), on the third or fourth
time of dialing, the computer locks hard with no response from mouse or
keyboard. The keyboard capslock and scrolllock lights flash on and off
continuously.
Maybe you should say somewhere in the description here
which APC it's referring to. Aka, Alternative PHP
Cache, and not American Power Conversion Corp. (ala
apcupsd).
--- Oden Eriksson [EMAIL PROTECTED] wrote:
[Contrib-RPM]
--=-=-=
Name: apc-gui
Relocations:
i have found both with rc2 and now rc3 that when
configuring the video for a mach64 card with xfree86
3.3.6 (either in the install (expert install) or thru
mcc), i am not given the option to test the
configuration. just in case - i am setting up as
1280x1024@60hz/16bpp. once with rc2 i selected
I think the problem with drakfont stalling when copying fonts from ntfs
partitions might be due to the ntfs 2.10a update that went into kernel
2.4.19-9mdk, that's around the time the problem began for me anyway.
rc3 problems:
1. installing rc3 last night (expert install), i
entered my ISP number at the modem config point
(number=*70,303...) as usual, then using kppp for the
first time did not connect because the number had been
recorded as 70303... without any of the special
punctuation...
2. i've seen
O'Riordan, Kevin wrote:
I think the problem with drakfont stalling when copying fonts from ntfs
partitions might be due to the ntfs 2.10a update that went into kernel
2.4.19-9mdk, that's around the time the problem began for me anyway.
Maybe not. I copy all TTF fonts from Windows XP Pro
On lördagen den 21 september 2002 18.41 David Walser wrote:
Maybe you should say somewhere in the description here
which APC it's referring to. Aka, Alternative PHP
Cache, and not American Power Conversion Corp. (ala
apcupsd).
fixed
--- Oden Eriksson [EMAIL PROTECTED] wrote:
On Sat, Sep 21, 2002 at 09:12:39AM -0400, Felix Miata wrote:
I reported in on 9 Sep, shortly after RC2 release. It looks like it will
be at least two weeks from then until the final.
The scheduled date was the 13th which got pushed back to the 15th which
got pushed back again... But that was
On Sat, Sep 21, 2002 at 02:45:24PM +0100, Peter Ruskin wrote:
The cure:
rpm -e msec
All that does is stops msec from setting TMOUT as readonly. It does not
*fix* the problem. It's a workaround. I've tried to get the people
having this problem to send me the correct scripts so that I can fix
On Sat, Sep 21, 2002 at 04:32:34PM +0200, Jure Repinc wrote:
I just installed Mandrake 9.0 RC3 on fresh and the first thing I noticed
is that there are no sounds while KDE is starting up. I checked the
volumes with KMixer and they were all set to 0. I have Hercules Game
Theater XP. Here is
Hi,
I've just installed RC3 and I'm having problems with sound.
I have a via686 AC97 motherboard sound chip using an Athlon 1.2 Ghz.
I used Mandrake Control Centre to change the sound driver from OSS to ALSA.
Curriously the pull down option in the sound config program only showed the
OSS
On Sat, 21 Sep 2002 10:17:53 -0400
Brian Craft [EMAIL PROTECTED] wrote:
On Saturday 21 September 2002 10:14 am, Igor Izyumin wrote:
On Saturday 21 September 2002 07:46 am, Brian Craft wrote:
I'm running Mandrake 9 RC3 on my laptop and my soundcard is listed as
follows from Harddrake:
Ben Reser wrote:
On Sat, Sep 21, 2002 at 09:12:39AM -0400, Felix Miata wrote:
I reported in on 9 Sep, shortly after RC2 release. It looks like it will
be at least two weeks from then until the final.
The scheduled date was the 13th which got pushed back to the 15th which
got pushed back
Michael E. Jaggers [EMAIL PROTECTED] writes:
The subject says it all.
Mandrake Control Center says (Cooker) in the initial screen.
Result of `cat /etc/mandrake-release`.
[root@localhost charles]# php --help
Cannot find module (IP-MIB): At line 0 in (none)
Cannot find module (IF-MIB): At line 0 in (none)
Cannot find module (TCP-MIB): At line 0 in (none)
Cannot find module (UDP-MIB): At line 0 in (none)
Cannot find module (SNMPv2-MIB): At line 0 in (none)
Cannot
kernel-headers-2.4.18-41mdk.i586.rpm
still on cooker and installed on my system even after I upgraded to 2.4.19
--
-
Luis Alves
[EMAIL PROTECTED]
YM: lafa_home ICQ:5061305 AOL:lalvesnet Imici:lafa_work
other:[EMAIL PROTECTED]
On Saturday 21 September 2002 03:59 pm, Frans Ketelaars wrote:
On Sat, 21 Sep 2002 10:17:53 -0400
Brian Craft [EMAIL PROTECTED] wrote:
On Saturday 21 September 2002 10:14 am, Igor Izyumin wrote:
On Saturday 21 September 2002 07:46 am, Brian Craft wrote:
I'm running Mandrake 9 RC3 on
On Saturday 21 September 2002 03:05 pm, Luis Alves wrote:
kernel-headers-2.4.18-41mdk.i586.rpm
still on cooker and installed on my system even after I upgraded to 2.4.19
kernel-headers is now a part of glibc and only gets upgraded when glibc does.
That has not happened since
I originally fiddled with the mixer settings, volume and just about
everything else. Nothing worked, nada, just the big silence. Switching over
to the audigy (sp?) driver (which I understand is OSS) and everything worked
perfectly immediately.
My box is a dual P-III running the SMP kernel,
I just tried mtink which is a utility to monitor ink levels of Epson
prnters. And it doesn't work for non root users. I know it worked before
but in this RC3 it doesn't and is practically useless for users who are
not root.
--
Live long and prosper!
On Sat, Sep 21, 2002 at 02:04:51PM -0400, Felix Miata wrote:
I had thought the original target was the 15th, but regardless, my
report was approximately 31 hours after rc2 iso's were on the mirrors. I
think that's a respectable interval to get the iso's downloaded, install
the distro,
Charles A Edwards wrote:
[root@localhost charles]# php --help
Cannot find module (IP-MIB): At line 0 in (none)
Cannot find module (IF-MIB): At line 0 in (none)
Cannot find module (TCP-MIB): At line 0 in (none)
Cannot find module (UDP-MIB): At line 0 in (none)
Cannot find module
On Sat, Sep 21, 2002 at 06:58:08PM +0100, Dean Jenkins wrote:
Hi,
I've just installed RC3 and I'm having problems with sound.
I have a via686 AC97 motherboard sound chip using an Athlon 1.2 Ghz.
I used Mandrake Control Centre to change the sound driver from OSS to ALSA.
Curriously the
Viestissä Lauantai 21. Syyskuuta 2002 21:02, Daouda LO kirjoitti:
Michael E. Jaggers [EMAIL PROTECTED] writes:
The subject says it all.
Mandrake Control Center says (Cooker) in the initial screen.
Result of `cat /etc/mandrake-release`.
Since it's still cookin... it's just as it should
On Sunday 22 September 2002 4:58 am, sean wrote:
rc3 problems:
1. installing rc3 last night (expert install), i
entered my ISP number at the modem config point
(number=*70,303...) as usual, then using kppp for the
first time did not connect because the number had been
recorded as 70303...
Levi Ramsey wrote:
On Wed Sep 18 8:21 +0300, MdkActe wrote:
On Tue, 17 Sep 2002 21:25:35 -0400
Levi Ramsey [EMAIL PROTECTED] wrote:
I get this error message every time I attempt to start xmms. I'm
running on a via82cxxx sound chip with OSS drivers (though the
behavior also occurs
I've said this before... but I'll say it again...
Rushing a release to meet a schedule, instead of releasing when fully stable, ends
up hurting the distro in the long run. With Redhat, Sun, Lindows, Xandros and a host
of others now focusing on the desktop (of which Mandrake has been the leader
Hi,
My point is that the Gnome ESD sound system does not work correctly for me in
9.0 RC3.
Simply running esd from the command line produces digital noise which I guess
is the ESD start tune. It suggests a timming problem.
ESD works fine for me in MDK 8.2 on the same hardware using ALSA
I have an ATI ALL In Wonder 128 Theater Tuner with TV-out.
When I switch from xfree to terminal 1 (Ctrl-Alt-F1) and back to
xfree The computer freeze, the keyboard ligth begin to flash !
Nothing work I have to pull the plug !
__
Do you Yahoo!?
New
What is the codename for 9.0 release?
8.1 was vitamin
8.2 was bluebird
9.0 will be ?
--
Live long and prosper!
--- Jure Repinc [EMAIL PROTECTED] wrote:
What is the codename for 9.0 release?
8.1 was vitamin
8.2 was bluebird
9.0 will be ?
gcsayseverybodysux? :o)
__
Do you Yahoo!?
New DSL Internet Access from SBC Yahoo!
http://sbc.yahoo.com
Well, the subject says it all, the machine freezes completely when I
turn my Lexmark Z51 USB printer on.
No mouse, no keyboard (both PS2), no remote access, nothing, the machine
is completely dead. This is new to me, I have done this several times
and never had any problem.
I cannot find
RC3
The only two users I use are set via mcc to exist in only one group
(501) that is not the same as either user (502 503). Nevertheless, all
files are written as group ID = owner ID.
Also, I want both users 502 503 to share the same Mozilla bookmarks
file in /home as /home/bookmarks.html
Le Dimanche 22 Septembre 2002 00:28, denis bergeron a écrit :
I have an ATI ALL In Wonder 128 Theater Tuner with TV-out.
When I switch from xfree to terminal 1 (Ctrl-Alt-F1) and back to
xfree The computer freeze, the keyboard ligth begin to flash !
Have you DRI enabled by any chance ?
On Sat, Sep 21, 2002 at 08:36:40PM +, SI Reasoning wrote:
I've said this before... but I'll say it again...
Rushing a release to meet a schedule, instead of releasing when fully stable, ends
up hurting the distro in the long run. With Redhat, Sun, Lindows, Xandros and a host
of others now
On Sat, 2002-09-21 at 15:33, Quel Qun wrote:
Well, the subject says it all, the machine freezes completely when I
turn my Lexmark Z51 USB printer on.
No mouse, no keyboard (both PS2), no remote access, nothing, the machine
is completely dead. This is new to me, I have done this several
On Sat, 2002-09-21 at 16:26, Quel Qun wrote:
On Sat, 2002-09-21 at 15:33, Quel Qun wrote:
Well, the subject says it all, the machine freezes completely when I
turn my Lexmark Z51 USB printer on.
No mouse, no keyboard (both PS2), no remote access, nothing, the machine
is completely
On every reboot the mcop temporary directory has permission root:root for all
users. eg /tmp/mcop-jubenvi permissions are root:root
artsd is unable to start because /tmp/mcop-jubenvi is not owned by user.
If I change the permissions to jubenvi:jubenvi and logout out and in again,
everything
I am in the middle of a benefit so I have not participated in the development
process this time. But my brother (a very loud microsoft proponent) has tried it
out. He actually was very impressed but ran into two problems that I heard about,
one dealing with the nvidea driver and the other was the
1 - 100 of 153 matches
Mail list logo
