One word: nice (erm...guess that was three...and that was...ugh, forget
it)
--
Eskild Hustvedt [EMAIL PROTECTED]
signature.asc
Description: This is a digitally signed message part
Am Dienstag, 4. November 2003, 22:23:53 Uhr MET, schrieb Christian Bricart:
-%define enable_xmatrix 0
-%define enable_extrusion 0
+%define enable_xmatrix 1
+%define enable_extrusion 1
Oops..? xmatrix is back in main?
No license conflict anymore..?
Or is it just in for the premiere of
-Original Message-
So, here are the results from my test.
Exercise was to copy the kernel rpm from media to hd using dd.
First with CD-ROM (Toshiba FireWire DVD-ROM):
Direct mount: 2327 KB/sec 6%CPU
Supermount:1321 KB/sec 9%CPU
43% performance regression
Now with
Hello,
Thanks for having joined this thread:
On 1-Nov-03 at 13:10, Florin ([EMAIL PROTECTED]) wrote:
It's quite funny to see all this energy in a long thread
... without testing the latest version of the package. I'm
not saying here that the latest version works for your
... but it works
Austin wrote:
Okay, I know everyone has been itching for a really bad song, written in
ten minutes, and recorded in less than twenty, about the new kernel, so
here it is:
http://groundstate.ca/twopointsix.ogg
Bravo ... encore ...
--
David Coe
Hello,
Thanks for your valuable contribution:
On 1-Nov-03 at 11:02, Luca Berra ([EMAIL PROTECTED]) wrote:
it _IS_ a bug in nss_ldap package
in short
dbopen is db1 syntax
dbX (for X1) provide a db_185.h wrapper for dbopen
nss_ldap looked for dbX/db_185.h (for X =3)
db4 has db4/db_185.h
Ainsi parlait Götz Waschk :
Am Dienstag, 4. November 2003, 22:23:53 Uhr MET, schrieb Christian Bricart:
-%define enable_xmatrix 0
-%define enable_extrusion 0
+%define enable_xmatrix 1
+%define enable_extrusion 1
Oops..? xmatrix is back in main?
No license conflict anymore..?
Am Mittwoch, 5. November 2003, 10:12:25 Uhr MET, schrieb Guillaume Rousse:
Could you also add an additional plf switch, triggering all of these
individual ones, and provide a plf build ?
What would you prefer, an additional subpackage for extrusion and the
2 matrix savers or a plf package of
Austin [EMAIL PROTECTED] writes:
Okay, I know everyone has been itching for a really bad song, written in
ten minutes, and recorded in less than twenty, about the new kernel, so
here it is:
http://groundstate.ca/twopointsix.ogg
Of course this was done wholly with free software:
Mandrake
Still a little issue in test9-4mdk : you should compile capability
(CONFIG_SECURITY_CAPABILITIES=yes) in the kernel, not a module (,
otherwise bind can't be started until capability module is loaded..
thanks, it will be done in next release
please don't,
the kernel is bug enough
not
Hello
On Tue, Nov 04, 2003 at 10:26:47PM -0500, Austin wrote:
Okay, I know everyone has been itching for a really bad song, written in
ten minutes, and recorded in less than twenty, about the new kernel, so
here it is:
http://groundstate.ca/twopointsix.ogg
Really great !
lenny
have you also tried the latest luca's package ?
http://people.mandrakesoft.com/~florin/www/rpms/cooker/RPMS/i586/nss_ldap-211-3mdk.i586.rpm
--
Florin http://www.mandrakesoft.com
http://people.mandrakesoft.com/~florin/
# wget
http://people.mandrakesoft.com/~florin/www/rpms/cooker/RPMS/i586/nss_ldap-211-3mdk.i586.rpm
--08:39:43--
http://people.mandrakesoft.com/0.00E+00florin/www/rpms/cooker/RPMS/i586/nss_ldap-211-3mdk.i586.rpm
= `nss_ldap-211-3mdk.i586.rpm'
Resolving
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Svetoslav Slavtchev wrote:
Still a little issue in test9-4mdk : you should compile capability
(CONFIG_SECURITY_CAPABILITIES=yes) in the kernel, not a module (,
otherwise bind can't be started until capability module is loaded..
thanks, it will be
On Wed, 2003-11-05 at 09:13, Andrey Borzenkov wrote:
Slightly offtopic. Do you have problems with media change detection on USB
stick? I had report (and verified) that when you unplug stick, change contents
on otehr system and plug back again supermount does not detect media change and
does
Still a little issue in test9-4mdk : you should compile capability
(CONFIG_SECURITY_CAPABILITIES=yes) in the kernel, not a module (,
otherwise bind can't be started until capability module is loaded..
thanks, it will be done in next release
oops, spell corrections :-)
please
Olivier Blin [EMAIL PROTECTED] writes:
If I could get alsa-0.9.8 and nVidia drivers, I'd keep running this
baby. Very responsive compared 2.4.22-21 on my 1.3G 9.2 cooker
machine!
I'll try to build the nvidia drivers later today. If I succeed, i'll
write a small howto :)
Added to the Nvidia
Hello,
On 1-Nov-03 at 18:25, Vincent Danen ([EMAIL PROTECTED]) wrote:
Where does this bug exhibit itself? Only in cooker? Or with 9.2, and
under what conditions? Surely a buildrequires error would make it
work, or not, for all installs, no?
In my october 31st tests it occured with 9.2
On Wed, 05 Nov 2003 10:29:36 +0100, Svetoslav Slavtchev wrote:
Still a little issue in test9-4mdk : you should compile capability
(CONFIG_SECURITY_CAPABILITIES=yes) in the kernel, not a module (,
otherwise bind can't be started until capability module is loaded..
thanks, it will be done
On Tue, 04 Nov 2003 13:23:17 -0600, Brad Felmey wrote:
Is there any legitimate reason to require docs? I should be able to have
things work without docs installed.
Because you have an Help button on logout which requires gnome-user-docs..
--
Frederic Crozat
MandrakeSoft
On Wed, Nov 05, 2003 at 10:59:32AM +0100, Dominique Petitpierre wrote:
On 2-Nov-03 at 17:58, Luca Berra ([EMAIL PROTECTED]) wrote:
it hasn't got a damn to do with cert7.db
it is related to: rfc2307bis support
from README ---
Compiling with
Ainsi parlait Götz Waschk :
Am Mittwoch, 5. November 2003, 10:12:25 Uhr MET, schrieb Guillaume Rousse:
Could you also add an additional plf switch, triggering all of these
individual ones, and provide a plf build ?
What would you prefer, an additional subpackage for extrusion and the
2
You just trampled on Vincent's fixes...
Luca Berra wrote:
Name: nss_ldap Relocations: (not relocateable)
Version : 211 Vendor: Luca Berra [EMAIL
PROTECTED]
Release : 3mdk Build Date: Sat Nov 1
You trampled Gwenole's fixes...
Laurent Culioli wrote:
Name: gaim Relocations: (not relocateable)
Version : 0.72 Vendor: MandrakeSoft
Release : 1mdk Build Date: Wed Nov 5 11:14:37 2003
-=-=-=-
On Wed, 5 Nov 2003 02:39:30 +0100 (CET)
Lenny Cartier [EMAIL PROTECTED] wrote:
[Contrib-RPM]
Name: juk Relocations: (not relocateable)
Version : 1.95a Vendor: MandrakeSoft
Release : 1mdk Build Date:
I've tried the new KDE 3.2 Beta1 (Thanks Laurent!)
Minor problem, when I open kcontrol panel I can't configure anything
because all of the options are missing . .
Thx,
R.Fox
--
Robert Fox [EMAIL PROTECTED]
Fox Consulting Services
Added to the Nvidia 2.6 patch, I had to add one more patch to be able
to build on a different running kernel, and somme specs changes IIRC.
Nice, but I guess it will work only with the smp package (because that
is the last one that is built before kernel-source is built ...)
We need to make
On Wed, 5 Nov 2003, Olivier Blin wrote:
Wow. I eat my words.
Test9.4mdk kicks ass. All modules load (alsa, firewire, USB, video,
even joystick!!!) This is very cool.
thanks to svetljo, he told me how to fix it
Responsiveness is insane. Like even my mouse cursor moves faster. Is
Guillaume Rousse [EMAIL PROTECTED] writes:
Guillaume Rousse [EMAIL PROTECTED] 4.4-42mdk
- added bash-completion
- spec cleanup
- bziped additional sources
this package and especially its spec file is in cvs.
i just committed your changes in cvs but do not forget this when
altering
David Walluck [EMAIL PROTECTED] writes:
David Walluck [EMAIL PROTECTED] 0:2003.06.02-1mdk
- release
thanks, i planned to package it for years but never attempt to do
it :-(
David Walluck [EMAIL PROTECTED] writes:
--- viewcvs-1.0-0.20031001.1mdk.src.rpm/viewcvs.spec 2003-11-05 09:22:47.0
+0100
+++ viewcvs-1.0-0.20031104.1mdk.src.rpm/viewcvs.spec 2003-11-05 09:22:47.0
+0100
@@ -1,6 +1,6 @@
%define name viewcvs
%define version 1.0
On Wed, 2003-11-05 at 10:25, Götz Waschk wrote:
[Contrib-RPM]
-=-=-=-
Name: xmms-sid Relocations: (not relocateable)
Version : 0.8.0 Vendor: MandrakeSoft
Release : 0.beta5.3mdk Build Date: Wed Nov 5 10:24:20
Am Mittwoch, 5. November 2003, 12:29:32 Uhr MET, schrieb Adam Williamson:
Do we really need two xmms SID plugins, both based on libsidplay? Is
there some significant difference between them?
Yes, there are. Try them. Here's one difference: xmms-sid supports
libsidplay2, but you cannot select
AArgh, sorry :(
will fix it this evening if noone else does before me.
Thanks for noticing,
L.
On Wed, Nov 05, 2003 at 05:54:38AM -0500, David Walser wrote:
You just trampled on Vincent's fixes...
%changelog
-* Fri Oct 17 2003 Vincent Danen [EMAIL PROTECTED] 207-4mdk
-- use /%%_lib not /lib so
On Wednesday 05 November 2003 12:48, Robert Fox wrote:
I've tried the new KDE 3.2 Beta1 (Thanks Laurent!)
Minor problem, when I open kcontrol panel I can't configure anything
because all of the options are missing . .
Yes I know :(
I will try to fix it today
Thx,
R.Fox
Ainsi parlait Thierry Vignaud :
Guillaume Rousse [EMAIL PROTECTED] writes:
Guillaume Rousse [EMAIL PROTECTED] 4.4-42mdk
- added bash-completion
- spec cleanup
- bziped additional sources
this package and especially its spec file is in cvs.
i just committed your changes in cvs but do
[please Cc me on this thread. thank you]
-Original Message-
On Tue, 04 Nov 2003 17:21:12 +0300
Andrey Borzenkov [EMAIL PROTECTED] wrote:
I fails to see these directions on www.minion.de. Quoting README:
[ snip ]
anyway - it works. It works for may people. Actually so far it
Guillaume Rousse [EMAIL PROTECTED] 4.4-42mdk
- added bash-completion
- spec cleanup
- bziped additional sources
hey, if we start to ship completion functions with packages what about
Zsh?
On Tue, 4 Nov 2003, Bjarne Thomsen wrote:
Any news about the 23mdk panic?
Sorry, we tried many configurations to no avail. :-( i.e. it still works.
Among others things, tried with an xfs /boot, reiserfs /, ext3 /home, it
works. Tried a 2 disks configuration: first disk with some ntfs garbage,
Pierre Jarillon [EMAIL PROTECTED] writes:
When I press enter on the very fist screen, the install continues in graphic
mode without any problem.
Is there a difference of mode between them ?
Yes. Lilo/syslinux patches are based on vesa-1.2 and are real
mode code. Kernel going framebuffer is
Luca Olivetti [EMAIL PROTECTED] writes:
This is on 9.2, so I should probably open a bug in anthill, but
since fpons is more likely to read cooker...
Francois has stopped working for Mandrake. He's not anymore a
MandrakeSoft employee since Mon 3 Nov.
It hasn't been decided yet what will be
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Andrey Borzenkov wrote:
[please Cc me on this thread. thank you]
-Original Message-
On Tue, 04 Nov 2003 17:21:12 +0300
Andrey Borzenkov [EMAIL PROTECTED] wrote:
I fails to see these directions on www.minion.de. Quoting README:
[ snip
[...]
3. Use separate build tree approach and ship single kernel sources
that point
to different kernel build trees that are distributed as separate packages.
(link established by kheader) That saves us overhead of having sources
n x times. It almost certainly requires Makefile
Ainsi parlait Andrey Borzenkov :
Guillaume Rousse [EMAIL PROTECTED] 4.4-42mdk
- added bash-completion
- spec cleanup
- bziped additional sources
hey, if we start to ship completion functions with packages what about
Zsh?
Well, i don't know if situation is the same.
bash is maintained
Le mer 05/11/2003 à 09:01, Götz Waschk a écrit :
Am Mittwoch, 5. November 2003, 10:12:25 Uhr MET, schrieb Guillaume Rousse:
Could you also add an additional plf switch, triggering all of these
individual ones, and provide a plf build ?
What would you prefer, an additional subpackage for
Le mer 05/11/2003 à 13:21, Guillaume Cottenceau a écrit :
Luca Olivetti [EMAIL PROTECTED] writes:
This is on 9.2, so I should probably open a bug in anthill, but
since fpons is more likely to read cooker...
Francois has stopped working for Mandrake. He's not anymore a
MandrakeSoft
Tim Sawchuck wrote:
[..]
I have something going on with sound from xmms playing oggs, but I am not
sure it is the 2.6 kernel. I have it with the 2.4 kernel, but rarely, and
seems more frequent with 2.6. I seem to notice a chopping or clipping or
skips, but there is no pattern I can find.
Have
where is italian i18n ?
thanks l montel :)
Francesco
Le Mercredi 5 Novembre 2003 14:18, Guillaume Cottenceau a écrit :
Pierre Jarillon [EMAIL PROTECTED] writes:
When I press enter on the very first screen, the install continues in
graphic mode without any problem.
Is there a difference of mode between them ?
Yes. Lilo/syslinux patches are
On Wed, 2003-11-05 at 06:51, Guillaume Rousse wrote:
However, the shell source should be commited, the only problem was to know who
to ask, as there is no maintainer anymore for urpmi :-(
Eh? What happened to Francois?
--
Brad Felmey [EMAIL PROTECTED]
Uncompensated Mandrake Guinea Pigs, Inc.
On Wed, 2003-11-05 at 08:32, Brad Felmey wrote:
On Wed, 2003-11-05 at 06:51, Guillaume Rousse wrote:
However, the shell source should be commited, the only problem was to know who
to ask, as there is no maintainer anymore for urpmi :-(
Eh? What happened to Francois?
Nevermind, saw on
, 5 2003, 16:10,francesco.melo:
where is italian i18n ?
thanks l montel :)
Francesco
dont worry, it can be even worst, like hebrew not in the 3 disks i d/l from
the club, or the koffice heberw translations not avilable at all :)
OK folks. FHS 2.3 is currently stuggling with a couple of controversial
proposals. They would like Mandrake's opinion, as part of what FHS tries
to do is formalize current convention. United Linux based distros use
these currently. My take is Red Hat is against them. I'm not sure how
to
Quoting Olivier Blin [EMAIL PROTECTED]:
Still a little issue in test9-4mdk : you should compile capability
(CONFIG_SECURITY_CAPABILITIES=yes) in the kernel, not a module (,
otherwise bind can't be started until capability module is loaded..
thanks, it will be done in next release
--
http://qa.mandrakesoft.com/show_bug.cgi?id=6089
[EMAIL PROTECTED] changed:
What|Removed |Added
Status|UNCONFIRMED |RESOLVED
Platform|
Le mer 05/11/2003 à 14:50, Stew Benedict a écrit :
OK folks. FHS 2.3 is currently stuggling with a couple of controversial
proposals. They would like Mandrake's opinion, as part of what FHS tries
to do is formalize current convention. United Linux based distros use
these currently. My
Am Mittwoch, 5. November 2003, 09:50:21 Uhr MET, schrieb Stew Benedict:
OK folks. FHS 2.3 is currently stuggling with a couple of controversial
proposals. They would like Mandrake's opinion, as part of what FHS tries
to do is formalize current convention. United Linux based distros use
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Stew Benedict wrote:
OK folks. FHS 2.3 is currently stuggling with a couple of controversial
proposals. They would like Mandrake's opinion, as part of what FHS tries
to do is formalize current convention. United Linux based distros use
these
Pierre Jarillon [EMAIL PROTECTED] writes:
Le Mercredi 5 Novembre 2003 14:18, Guillaume Cottenceau a écrit :
Pierre Jarillon [EMAIL PROTECTED] writes:
When I press enter on the very first screen, the install continues in
graphic mode without any problem.
Is there a difference of mode
http://qa.mandrakesoft.com/show_bug.cgi?id=6290
Summary: Missing BuildRequires libxslt-devel
Product: libmrproject
Version: 0.9.1-1mdk
Platform: PC
OS/Version: All
Status: UNCONFIRMED
Severity: normal
Priority: P2
Jure Repinc [EMAIL PROTECTED] writes:
k Quel Qun wrote:
reiserfs seems to be borked.
I also get kernel panic with harddrive which has 3 partitions on it:
swap, ext3 and ntfs. So it is not just reiserfs. Worked just fine with
-19mdk kernel.
On Wed, 05 Nov 2003 00:07:19 -0500
Austin [EMAIL PROTECTED] scribed on electronic parchment:
On Wed, 2003-11-05 at 00:02, Olivier Blin wrote:
Your problem has been reported here :
http://www.mail-archive.com/[EMAIL PROTECTED]/msg09733.html
Enh... probably best to let them fix it. There
On Thu, 2003-10-30 at 12:02, Vedran Ljubovic wrote:
--- Buchan Milne [EMAIL PROTECTED] wrote:
Yes, just accept the username and password, and show
some moving
graphics until you have authenticated the user.
Ever noticed how long it takes to tell you your
password is wrong on
first
On Wed, 5 Nov 2003 09:05:14 -0600
[EMAIL PROTECTED] wrote:
I tried the test9-4mdk last night on my mostly updated cooker box and
found that there is no module for my network card. I have a Netgear
fa310 pci ethernet card and it was using the tulip driver, but there
isn't one in test9-4mdk.
http://qa.mandrakesoft.com/show_bug.cgi?id=6290
[EMAIL PROTECTED] changed:
What|Removed |Added
Status|UNCONFIRMED |RESOLVED
Resolution|
http://qa.mandrakesoft.com/show_bug.cgi?id=6291
Summary: anacron is never called after suspend
Product: suspend-scripts
Version: 1.6-3mdk
Platform: PC
OS/Version: All
Status: UNCONFIRMED
Severity: normal
Priority:
Quoting Olivier Blin [EMAIL PROTECTED]:
On Wed, 5 Nov 2003 09:05:14 -0600
[EMAIL PROTECTED] wrote:
I tried the test9-4mdk last night on my mostly updated cooker box and
found that there is no module for my network card. I have a Netgear
fa310 pci ethernet card and it was using the
On 11/05/2003 09:08:19 AM, Rolf Pedersen wrote:
Have you considered this?
http://www.mail-archive.com/[EMAIL PROTECTED]/msg129204.html
GNOME users need not worry about this oddity.
Or about arts (huge sigh of relief).
Austin
On Wed, 05 Nov 2003 06:08:19 -0800
Rolf Pedersen [EMAIL PROTECTED] scribed on electronic parchment:
Tim Sawchuck wrote:
[..]
I have something going on with sound from xmms playing oggs, but I am
not sure it is the 2.6 kernel. I have it with the 2.4 kernel, but
rarely, and seems more
http://qa.mandrakesoft.com/show_bug.cgi?id=6284
--- Additional Comments From [EMAIL PROTECTED] 2003-11-05 14:03 ---
*** Bug 6285 has been marked as a duplicate of this bug. ***
--
Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email
--- You are receiving this
I'd like to take a look at this proposals, but the URLs don't work.
Can you put these documents somewhere I can access them?
I can't reach the domain either.
attachment: snapshot1.png
http://qa.mandrakesoft.com/show_bug.cgi?id=6285
[EMAIL PROTECTED] changed:
What|Removed |Added
Status|UNCONFIRMED |RESOLVED
Resolution|
http://qa.mandrakesoft.com/show_bug.cgi?id=6292
Summary: ALSA snd_pcm_hw_params_set_period_size error: Invalid
argument
Product: vorbis-tools
Version: 1.0-7mdk
Platform: PC
OS/Version: All
Status: UNCONFIRMED
[paul] wrote:
http://qa.mandrakesoft.com/show_bug.cgi?id=6262
--- Additional Comments From [EMAIL PROTECTED] 2003-05-11 19:16 ---
On Friday 31 October 2003 01:55 pm, [xevi1714] wrote:
I do not see this problem currently. I am running 2.6.0-test9-mm1 as I type,
and I have not had
http://qa.mandrakesoft.com/show_bug.cgi?id=6251
[EMAIL PROTECTED] changed:
What|Removed |Added
Status|UNCONFIRMED |RESOLVED
Resolution|
Le Mercredi 5 Novembre 2003 17:41, Guillaume Cottenceau a écrit :
Pierre Jarillon [EMAIL PROTECTED] writes:
Le Mercredi 5 Novembre 2003 14:18, Guillaume Cottenceau a écrit :
Pierre Jarillon [EMAIL PROTECTED] writes:
When I press enter on the very first screen, the install continues in
Guillaume Cottenceau wrote:
Luca Olivetti [EMAIL PROTECTED] writes:
This is on 9.2, so I should probably open a bug in anthill, but
since fpons is more likely to read cooker...
Francois has stopped working for Mandrake. He's not anymore a
MandrakeSoft employee since Mon 3 Nov.
very sad news. I
FACORAT Fabrice posted
[EMAIL PROTECTED], excerpted below, on
Wed, 05 Nov 2003 16:48:08 +:
Le mer 05/11/2003 à 14:50, Stew Benedict a écrit :
OK folks. FHS 2.3 is currently stuggling with a couple of controversial
proposals. They would like Mandrake's opinion, as part of what FHS
tries
I have tried kernel-2.4.22.24mdk-1-1mdk.i586.rpm
on a PC with IDE ext3 root partition.
I get this error from mount:
hda5: bad access: block=2, count=2
then I get bad superblock and more errors.
I use a ram disk, as I have a SCSI CD writer.
On another PC with a SCSI HD I also get
a mount error of a
On Wed, Nov 05, 2003 at 12:58:10AM +0100, Fabien ILLIDE wrote:
I may have speak to quick last mail about radeontool...
I've play a bit with it, without problem, then send the mail.
But I've set light off for all night, so energy saving has come during
my sleep.
My CRT monitor have gone into
On Mon, 3 Nov 2003, Götz Waschk wrote:
Am Montag, 3. November 2003, 10:18:57 Uhr MET, schrieb [EMAIL PROTECTED]:
On Sun, 2 Nov 2003, Greg Meyer wrote:
Are we going to see updated ATI kernel modules for the 9.2 kernel updates?
wrong question, should be: are we going to see SRPMS for any
2.4.22-24mdkenterprise still gives panic when trying
to mount the ext3 root partition (mount-2.11z-9mdk).
fstab:
/dev/sda5 / ext3 defaults 1 1
/dev/sda1 /boot ext2 defaults 1 2
/dev/sda2 swap swap defaults 0 0
SCSI device sda: 71770616 512-byte hdwr sectors (36747 MB)
Thierry Vignaud wrote:
Guillaume Rousse [EMAIL PROTECTED] writes:
Guillaume Rousse [EMAIL PROTECTED] 4.4-42mdk
- added bash-completion
- spec cleanup
- bziped additional sources
this package and especially its spec file is in cvs.
Shouldn't the .spec file contain a header to warn the
Hello,
I'm a long-time user of the Java Mindterm ssh hosted at
http://csua.berkeley.edu/ssh/ (usually on Win98 using current latest version
of MSIE and their Java, etc.), and never had problems until I started trying
to login using computers with WinXP, MSIE, and Java(TM) Plug-in: Version
Hi,
--- Additional Comments From [EMAIL PROTECTED]
2003-11-05 21:47 ---
so probably drakxtools should add it
when configuring ide-scsi CD/DVD devices
I still believe a better fix should fit in kernel. However, this was
the precise interim solution adopted here for 9.2/AMD64. At least,
http://qa.mandrakesoft.com/show_bug.cgi?id=6264
[EMAIL PROTECTED] changed:
What|Removed |Added
Status|UNCONFIRMED |RESOLVED
Resolution|
On Fri, 31 Oct 2003 00:05, Juan Quintela wrote:
22mdk compiles ok with gcc-2.96.
It is still compiling on cluster (will be in mirrors at the end of
today).
Only module that don't compiles in cx88*. You need to disable it.
23mdk/24mdk will have a --with gcc296 option that will do it
Hi,
--- Additional Comments From [EMAIL PROTECTED]
2003-11-05 21:47 ---
so probably drakxtools should add it
when configuring ide-scsi CD/DVD devices
I still believe a better fix should fit in kernel. However, this was
the precise interim solution adopted here for
topic says it all, both src.rpm and binary rpm seems to be missing.. :\
http://qa.mandrakesoft.com/show_bug.cgi?id=6221
Summary: LM9.2 errata page has several problems/typos/errors
Product: Installation
Version: 1.846
Platform: All
OS/Version: All
Status: UNCONFIRMED
Severity: normal
http://qa.mandrakesoft.com/show_bug.cgi?id=6116
--- Additional Comments From [EMAIL PROTECTED] 2003-05-11 18:02 ---
Yes seguso you are right. I thought long ago they'd have fixed this by now.
The scrollbar in the galaxy theme should have something on it, preferably something in
http://qa.mandrakesoft.com/show_bug.cgi?id=6238
[EMAIL PROTECTED] changed:
What|Removed |Added
Status|UNCONFIRMED |NEEDINFO
--- Additional
http://qa.mandrakesoft.com/show_bug.cgi?id=5372
--- Additional Comments From [EMAIL PROTECTED] 2003-05-11 18:02 ---
I've tried the 2.4.22-18mdk kernel and it seems to fix the problem with
pcmcia service hanging during the boot sequence.
(I haven't tried -21mdk yet, so I don't know if
http://qa.mandrakesoft.com/show_bug.cgi?id=6148
[EMAIL PROTECTED] changed:
What|Removed |Added
Status|UNCONFIRMED |RESOLVED
Resolution|
mercredi 5 novembre 2003, à 11:05 pm, Svetoslav Slavtchev a écrit :
but if you get you can fix it it would be really nice :-)
Oh no, kernel people appear to say that's not a trivial thing to fix.
And since I needed an immediate working solution for my hardware, I
preferred the workaround. ;-)
mercredi 5 novembre 2003, à 11:07 pm, Per Øyvind Karlsen a écrit :
topic says it all, both src.rpm and binary rpm seems to be missing.. :\
Yes, will reupload. Appears to have been trashed during AMD64 mass
synchronization weeks back (because of apparent apache/php version
change whatsoever).
two days and not changed
is it my fault ?
thanks
Francescò
http://qa.mandrakesoft.com/show_bug.cgi?id=6221
[EMAIL PROTECTED] changed:
What|Removed |Added
Status|UNCONFIRMED |RESOLVED
Resolution|
Hi,
Since cooker has been defrosted, perhaps this is the right moment to
discuss putting the .noarch.rpm packages into a seperate (shared)
location. This is already being done at PLF, see:
ftp://ftp.easynet.fr/plf/mandrake/cooker
With the recent upload of a number of rather large noarch.rpm
On Wed, 2003-11-05 at 05:14, Gwenole Beauchesne wrote:
On Tue, 4 Nov 2003, Bjarne Thomsen wrote:
Any news about the 23mdk panic?
Sorry, we tried many configurations to no avail. :-( i.e. it still works.
Among others things, tried with an xfs /boot, reiserfs /, ext3 /home, it
works.
1 - 100 of 139 matches
Mail list logo
