Thanks very much. Please could I make a suggestion that this be included in
the handbook page?
On 8 Oct 2013 01:31, Warren Block wbl...@wonkity.com wrote:
On Tue, 8 Oct 2013, Andy Zammy wrote:
Hi,
I used the second section of the handbook (20.4) to create a gmirror. In
my
particular setup
This is actually trickier than it first looked. First I got into single
user mode by supplying 'shutdown now', but the tunefs commands all failed
with the following:
#tunefs -j disable /dev/ada0s1a
Clearing journal flags from inode 4
tunefs: Failed to write journal inode: Operation not permitted
I
On 8 October 2013 01:31, Warren Block wbl...@wonkity.com wrote:
On Tue, 8 Oct 2013, Andy Zammy wrote:
Hi,
I used the second section of the handbook (20.4) to create a gmirror. In
my
particular setup I had a 1GB /, 6GB swap, 1GB /tmp and the rest of the 1TB
drive was left for /usr
I
On Tue, 8 Oct 2013, Andy Zammy wrote:
This is actually trickier than it first looked. First I got into single user
mode by supplying 'shutdown now', but the tunefs commands all failed with the
following:
#tunefs -j disable /dev/ada0s1a
Clearing journal flags from inode 4
tunefs: Failed to
# gpart show ada0s1
gpart: No such geom: ada0s1
By the way, this is after a restart of the machine.
There's nothing to back up, I'm installing a fresh os, so I just install on
one drive, plug the other in, and start following the handbook instructions
for this method. So the only thing in
On Tue, 8 Oct 2013, Andy Zammy wrote:
Thanks very much. Please could I make a suggestion that this be included in the
handbook page?
Please do not top-post, it makes replies more difficult.
I have added a warning about SUJ to the top of the gmirror section in
the Handbook.
On Tue, 8 Oct 2013, Andy Zammy wrote:
# gpart show ada0s1
gpart: No such geom: ada0s1
By the way, this is after a restart of the machine.
There's nothing to back up, I'm installing a fresh os, so I just install on one
drive, plug the other in, and start following the handbook instructions
Andy Zammy wrote:
# gpart show ada0s1
gpart: No such geom: ada0s1
By the way, this is after a restart of the machine.
There's nothing to back up, I'm installing a fresh os, so I just install
on one drive, plug the other in, and start following the handbook
instructions for this method.
I tried creating the mirror before the install. As the drives are now
mirrored, the installer picked up on the face that there are two gm0 nodes
- one on each hard drive. I installed onto ada0's gm0 node.
After it reboots, the bootloader stops at the manual prompt. From what I
can see that's not
On Tue, 8 Oct 2013, Andy Zammy wrote:
Hi,
I used the second section of the handbook (20.4) to create a gmirror. In my
particular setup I had a 1GB /, 6GB swap, 1GB /tmp and the rest of the 1TB
drive was left for /usr
I had to deviate from the handbook when it came to running the dump +
10 matches
Mail list logo