for a single installation, afaik.
So my question is: how can I allow mailman to be installed n times
without overwriting the database, files, etc.?
Thanks very much,
-Lewis Thompson.
--
I was so much older then, I'm younger than that now. --Bob Dylan, 1964.
-| msn:[EMAIL PROTECTED] | jabber:[EMAIL
help. Good luck!
-Lewis Thompson.
--
I was so much older then, I'm younger than that now. --Bob Dylan, 1964.
-| msn:[EMAIL PROTECTED] | jabber:[EMAIL PROTECTED] | url:www.lewiz.org |-
___
freebsd-questions@freebsd.org mailing list
http
.
Can /home be configured so all files are created with permissions of
0600 (or 0700 for directories)? I use a umask of 77 but that's annoying
when playing with files in other locations.
Sorry if this is obvious/stupid :)
-Lewis Thompson.
--
I was so much older then, I'm younger than that now
? Is it possible?
Thanks,
-Lewis Thompson.
--
I was so much older then, I'm younger than that now. --Bob Dylan, 1964.
-| msn:[EMAIL PROTECTED] | jabber:[EMAIL PROTECTED] | url:www.lewiz.org |-
___
freebsd-questions@freebsd.org mailing list
http
it.
Sorry for all these questions ;)
-Lewis Thompson.
--
I was so much older then, I'm younger than that now. --Bob Dylan, 1964.
-| msn:[EMAIL PROTECTED] | jabber:[EMAIL PROTECTED] | url:www.lewiz.org |-
___
freebsd-questions@freebsd.org mailing list
, look to UFS2 and
POSIX ACL's.
I might give this a go, actually, thanks :)
-Lewis Thompson.
--
I was so much older then, I'm younger than that now. --Bob Dylan, 1964.
-| msn:[EMAIL PROTECTED] | jabber:[EMAIL PROTECTED] | url:www.lewiz.org
On Mon, May 09, 2005 at 03:51:30PM +0200, John Oxley wrote:
Linux has a nifty utility called htop, but that is not in the FreeBSD
ports.
Not sure about htop but pstree is in the ports and will show you things
hierarchically, which should do the trick.
Best wishes,
-Lewis Thompson.
--
I
editing pkgtools.conf in /usr/local/etc.
-Lewis Thompson.
--
I was so much older then, I'm younger than that now. --Bob Dylan, 1964.
-| msn:[EMAIL PROTECTED] | jabber:[EMAIL PROTECTED] | url:www.lewiz.org |-
___
freebsd-questions@freebsd.org mailing list
On Sat, Apr 09, 2005 at 01:37:22PM -0700, Sergei Gnezdov wrote:
I think it is
WITHOUT_X11=YES
Does it make any difference?
Not really. WITHOUT_X11=1 works perfectly for me. Just saves a little
time typing it ;)
-Lewis Thompson.
--
I was so much older then, I'm younger than that now
on pkgtools.conf file?
They're mostly in the pkgtools.conf file itself.
Hope that's some help,
-Lewis Thompson.
--
I was so much older then, I'm younger than that now. --Bob Dylan, 1964.
-| msn:[EMAIL PROTECTED] | jabber:[EMAIL PROTECTED] | url:www.lewiz.org
accounts stored in LDAP? Maybe
this will require some hacking of passwd.c?
Thanks very much,
-Lewis Thompson.
--
I was so much older then, I'm younger than that now. --Bob Dylan, 1964.
-| msn:[EMAIL PROTECTED] | jabber:[EMAIL PROTECTED] | url:www.lewiz.org
a btdownload... one.
In future best to check the pkg-plist first and not to post to ports@,
questions@ is the best place but only after you've done your research.
-Lewis Thompson.
--
I was so much older then, I'm younger than that now. --Bob Dylan, 1964.
-| msn:[EMAIL PROTECTED] | jabber:[EMAIL
, `passwd' can only change passwords for local or NIS users.
/etc/nssswitch.conf has:
group: ldap files
passwd: files ldap
which I suspect may be the problem (but I use LDAP for accounts). Is
there any way to work around this so I can use passwd for changing
KerberosV passwds?
Thank you,
-Lewis
proto tcp from any to fxp0 port 22 keep state
The reason I ask this question is that for my tunnel endpoints to ping
each other, a.a.a.a must be doing so (a.a.a.b has no firewall).
Thank you,
-Lewis Thompson.
--
I was so much older then, I'm younger than that now. --Bob Dylan, 1964.
-| msn
a configurable menu that allows you
to open any image in a variety of editors.
-Lewis Thompson.
--
I was so much older then, I'm younger than that now. --Bob Dylan, 1964.
-| msn:[EMAIL PROTECTED] | jabber:[EMAIL PROTECTED] | url:www.lewiz.org
Hi,
I managed to find
http://lists.freebsd.org/pipermail/freebsd-questions/2004-February/035424.html
but I couldn't find an answer to the qeustion about Super G support.
Do you have any plans to introduce Super support?
Thanks very much,
-lewiz.
--
I was so much older then, I'm younger than
Hi,
I want to use pf/altq to give ssh a high priority so I don't get lagged
down when something is downloading.
I have:
altq on ath0 priq queue { default, ssh }
queue default priq(default)
queue ssh priority 15 priq(red)
I'm pretty sure this ``works'' but I was really hoping for more.
On Tue, Nov 02, 2004 at 07:33:47PM +, Lewis Thompson wrote:
I'm attempting to get an encrypted tunnel going between two machines.
Before I start pasting away my configs, tcpdump logs, racoon logs, etc.
I would like to ask the following question:
I've read that 5.2.1 had broken IPSEC
Hi,
I'm attempting to get an encrypted tunnel going between two machines.
Before I start pasting away my configs, tcpdump logs, racoon logs, etc.
I would like to ask the following question:
I've read that 5.2.1 had broken IPSEC, such that IKE traffic (port 500)
was not bypassed (or something
Hi,
I'd like to start slapd using the distributed slapd.sh script but I also
want to also KRB5_KTNAME=/usr/local/etc/openldap/ldap.keytab.
Can anybody suggest a sensible way of doing this? I'm looking ideally
for something that will continue to work with upgrades of openldap (and
the startup
Hi,
Does anybody here know anything about NFS4 server support in FreeBSD?
Searching doesn't reveal much but I'm asking on the offchance somebody
has some inside information.
Thanks,
-lewiz.
--
I was so much older then, I'm younger than that now. --Bob Dylan, 1964.
On Mon, Nov 01, 2004 at 03:14:16PM -0600, Dan Nelson wrote:
In the last episode (Nov 01), Lewis Thompson said:
Does anybody here know anything about NFS4 server support in FreeBSD?
Searching doesn't reveal much but I'm asking on the offchance
somebody has some inside information
Hi,
I'm just wondering if anybody can tell me how I can build sendmail from
world with LDAP support. I currently have SASL support enabled in
make.conf (copied examples from defaults/make.conf) and hoped it might
be possible to do the same for LDAP. Can anybody tell me if this is the
case?
On Sat, Sep 18, 2004 at 08:16:39PM -0400, Hotmail wrote:
I Bought from you FreeBSD 4.10 v, my main concern after I installed it
in my laptop I have trouble defining my network wireless card Linksys
wireless -B and the network, How can I do that?. Also Do I need the
device wi0?, and how can I
Hi,
I wonder if there is a comprehensive list of what many of the sysctl
values are, both in terms of what the node (by this I mean, say,
hw.acpi.verbose) means, and what the values would mean/do?
If this doesn't exist would it be worth creating a website with a list
of all these? I've got
On Thu, Sep 09, 2004 at 07:53:59AM -0700, Ted Mittelstaedt wrote:
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Lewis Thompson
Sent: Wednesday, September 08, 2004 2:13 PM
To: FreeBSD-questions
Subject: Re: VESA_800x600 (age old question
Hi,
This question has been rehashed many times, so I apologise. I've got
VESA and SC_PIXEL_MODE in my kernel and I want to be able to do:
vidcontrol VESA_800x600.
However, when I do this I receive the following message:
vidcontrol: cannot set videomode: Operation not supported by device
On Wed, Sep 08, 2004 at 04:59:23PM -0400, Parv wrote:
in message [EMAIL PROTECTED], wrote Lewis Thompson
thusly...
vidcontrol: cannot set videomode: Operation not supported by device
Can somebody please tell me what this means?
All that means is the card does not have proper/complete
On Sun, Sep 05, 2004 at 03:53:48AM +1000, Chris Ryan wrote:
How can I get access to ftp-master.FreeBSD.org to help
with testing?
I think you might be getting confused. If you want to help with testing
you want to be tracking -STABLE (or maybe even -HEAD). Reading the
Handbook is a good idea
On Fri, Aug 27, 2004 at 08:28:58AM -0600, Aaron Siegel wrote:
Hello
I am in the process of setup a similar configuration using poptop to create a
pptp link between a static server and a roaming computer with an anonymous.
There is also l2tpd from what I read it is more secure than pptp but
On Fri, Aug 27, 2004 at 03:40:08PM +0100, Lewis Thompson wrote:
On Fri, Aug 27, 2004 at 08:28:58AM -0600, Aaron Siegel wrote:
Hello
I am in the process of setup a similar configuration using poptop to create a
pptp link between a static server and a roaming computer with an anonymous
Hi,
I'm wondering if it's possible to have a ``roaming tunnel'' so I have
local-like access on my laptop wherever I am.
I currently have an encrypted IPSEC tunnel set up between my laptop
and server (both with static IPs) as explained in the Handbook
On Wed, Aug 25, 2004 at 05:42:21PM -0500, David Kelly wrote:
On Aug 25, 2004, at 4:44 PM, Lewis Thompson wrote:
I'm wondering if it's possible to have a ``roaming tunnel'' so I have
local-like access on my laptop wherever I am.
Have not done it myself but IIRC the key is to define
On Wed, Aug 25, 2004 at 07:03:10PM -0400, Ara Avvali wrote:
What I mean if someone wants to hack to machine or even get physical access
half of the job is done by knowing the root user name.
But they could just look in the passwd file...
-lewiz.
--
I was so much older then, I'm younger than
Hi,
I have written some code that does some rather nasty stuff to determine
whether or not there is media in the drive. It is basically this:
open('/dev/dvd', 'rb')
read(1)
at which point if I get an exception (in Python) I know there is no
media (or it is blank). If it throws no exception
Hi,
I'm trying to create a port for a Python application that I want to
start from local/etc/rc.d. The command is this:
/usr/bin/su freevo -c /usr/local/bin/freevo -fs start /dev/null 21
Unfortunately when I boot up I get a message about Python not being
configured/available at this time.
On Sun, Jun 20, 2004 at 03:01:54PM -0400, Chuck Swiger wrote:
Lewis Thompson wrote:
I'm trying to create a port for a Python application that I want to
start from local/etc/rc.d. The command is this:
/usr/bin/su freevo -c /usr/local/bin/freevo -fs start /dev/null 21
Unfortunately when
On Sun, Jun 20, 2004 at 03:56:43PM -0400, Chuck Swiger wrote:
Lewis Thompson wrote:
[ ... ]
Does the script set $PATH to include the location where python is? If
you don't list /usr/local/bin explicitly, this may be the problem...
No, PATH doesn't get set but if I run it as /usr/local/bin
On Thu, Jun 17, 2004 at 12:36:09PM -0500, Jamie Novak wrote:
The install was successful, but as soon as I try to run the program, all
I get is the same message repeating over and over again in my xterm:
*** loading the extensions datasource
The browser never actually starts and that
On Wed, Jun 16, 2004 at 01:46:23PM +0200, freebsd_daemon wrote:
I am planing to build a small DB-server and want to use a hot-swap capable
Raid 5 array of IDE disks for the data. I am going to use FreeBSD 4.10R.
I would like to use a 3ware Escalade 7506-4LP controller which is suppost to
On Sun, Apr 25, 2004 at 12:54:56AM +0200, lists wrote:
Currently were going to reinstall all servers we have from redhat 9 to
freebsd because redhat 9 is EOL...
But after reading a few mails here that 4.9 is most likely not supported
for a long time.. what version should we take then?
Looks
On Sun, Apr 25, 2004 at 01:33:22PM +0200, Christoph Kukulies wrote:
I'm getting this in my log/messages:
Apr 25 13:25:42 mybox dhcpd: send_packet: Permission denied
Could it be that a certain firewall setting or something missing
would be causing this?
Possibly. It might be worth
On Sun, Apr 25, 2004 at 01:03:52PM -0400, Ralph M. Los wrote:
I currently have Samba 2.2.8a running. I'd like to get up to
the 3.0.x.x version, as I've heard there are significant advances in
that version. Can someone tell me if I do a 'make install' from the
/usr/ports/net/samba-devel
On Fri, Apr 23, 2004 at 07:46:05PM -0500, Eric Crist wrote:
This is for a Compaq Presario 2100 (laptop). My beef is that my console only
takes up a small section of the screen (although X is full screen). I know
some laptops have a 'stretch' capability, but, alas, I was a cheap bastard,
Hi,
I've just bought a Silicon Image Sil 0680 RAID controller. I will only
be using it as an IDE controller (i.e. without any RAID functionality).
This causes a panic on 5.2.1-p5 (GENERIC):
atapci1: SiL 0680 UDMA 133 controller
port 0xcc00-0xcc0f,0xd000-0xd003,0xd400-0xd407, 0xd800-0xd803,
On Thu, Apr 22, 2004 at 03:24:03PM -0700, [EMAIL PROTECTED] wrote:
I am tring to install mrtg on my test FreeBSD 5.1 box. I change into my
/usr/ports/net/mrtg directory and find that there is only a README.html
How can I get this port back? I tried to cvsup it with ports-all but the
files
Hi,
I'm attempting to port some software (MythTV) to FreeBSD. My knowledge
of this is fairly limited and I'm wondering how to convert from
linux/cdrom.h to sys/cdio.h.
I see I can determine the capabilities of the drive quite easily.
However, what I want is to (for example) lock/unlock the
On Thu, Apr 08, 2004 at 09:17:14AM +0200, RazorOnFreeBSD wrote:
Do you think I need to change my hardrive already ? It is just one year
. :(
Good news is that it's probably still under warranty :)
-lewiz.
--
I was so much older then, I'm younger than that now. --Bob Dylan, 1964.
On Wed, Apr 07, 2004 at 07:27:09AM +1000, sAndri Kok wrote:
I'm interested in using FreeBSD's daemon logo screensaver in X. Is that
possible? If it is, how do I do it? any man that I can read? Thx heaps =)
That's the one where the Beastie bounces about the screen, right?
Best bet is
On Tue, Mar 30, 2004 at 05:42:41PM +0100, Andrea Venturoli wrote:
To make it clear: with nss_ldap enabled, everything that accessed the
user database would crash: so ls -l,
id and so on (but not, e.g., ls without -l).
I spoke to nectar@ about this. CVSup to that latest OpenLDAP21 and then
On Mon, Mar 29, 2004 at 08:52:23PM -0600, Earl Larsen wrote:
I was wondering what is a good, free ;) anti virus program for FreeBSD.
Depending what you mean by free... maybe try security/f-prot. It's free
for non-commercial use.
-lewiz.
--
I was so much older then, I'm younger than that now.
Hi,
Can anybody help me out with ipfw rules to do dummynet shaping before
packets hit natd for translation.
192.168.0.4 should be able to upload at just 100KB/s. The default
gateway and natd is done on 192.168.0.1 where I have the following
rules:
pipe 1 ip from 192.168.0.4 to any via xl1
On Tue, Mar 30, 2004 at 09:35:58AM -0500, Lowell Gilbert wrote:
Nikita S. Sychevsky [EMAIL PROTECTED] writes:
I can't build jdk-1.4.2p6_4 from the ports collection on jdk-1.4.2p6_4
system. Can anybody help please?
Looks like a known problem; it's failing on the test cluster as well.
On Sun, Mar 28, 2004 at 04:25:56PM -0700, [EMAIL PROTECTED] wrote:
# dd if=/dev/ad1s1a bs=64k
dd: /dev/ad1s1a: Input/output error
Try:
dd if=/dev/ad1s1a of=? conv=noerror,sync bs=64k
I recently ``recovered'' a disk from this error. The sync is
critical, trust me ;) (check the man page for
On Fri, Mar 26, 2004 at 07:38:42AM -0500, WebTent Support wrote:
I have Cyrus SASL 2.1.18 installed from ports on 5.2.1. Does it place
the source somewhere? How can I test with the sample-server and
sample-client?
I don't think it gets installed. Look in the work directory. server
and client
Hi,
I'm trying to set up some traffic shaping using IPFW2 and DUMMYNET. I
also use natd and I'm a little stumped as to where to put my pipes so
that they will work as I expect.
ipfw add pipe 1 all from 192.168.0.4 to any via xl1
ipfw add divert natd all from any to any via xl1
ipfw add pipe 1
Hi,
I'm trying to set up some traffic shaping using IPFW2 and DUMMYNET. I
also use natd and I'm a little stumped as to where to put my pipes so
that they will work as I expect.
ipfw add pipe 1 all from 192.168.0.4 to any via xl1
ipfw add divert natd all from any to any via xl1
ipfw add pipe 1
On Sat, Mar 20, 2004 at 12:23:11AM +, Lewis Thompson wrote:
On Sat, Mar 20, 2004 at 08:57:38AM +1030, Greg 'groggy' Lehey wrote:
On Friday, 19 March 2004 at 3:03:34 +, Lewis Thompson wrote:
In a reply to my original question you stated that ``dd if=ad3 of=ad1
bs=8192 conv=noerror
On Sun, Mar 21, 2004 at 12:52:47PM +0300, CBuH. wrote:
I have it of size X. And have 4 partitions marked, plus free unmarked
10Gb on that /dev/ad0. Want to make FreeBSD's partition bigger on
those 10Gbs.
It depends on where the free space is. If you mean growing the FreeBSD
slice (which is
On Sat, Mar 20, 2004 at 11:14:23AM +1030, Greg 'groggy' Lehey wrote:
I still don't understand why you're using dd.
To create as near-perfect copy of the disk as possible?
I want to work on the failing disk as little as possible in case I
cause further damage. Since the RAID0 volume is around
On Sat, Mar 20, 2004 at 07:41:53PM +0200, Eric Yellin wrote:
When I su -m and login as root, all I get in the prompt is a % sign. My
normal user shell is tcsh and the prompt looks like this:
[EMAIL PROTECTED]/home/eric(29): but this is not kept when I su -m.
How can I change this?
Look in
On Sat, Mar 20, 2004 at 01:46:14PM -0500, Shaun T. Erickson wrote:
How do I get the old version reinstalled, and have the new version as
well, for things that need it?
Take a look at portupgrade. You can find it in sysutils/portupgrade.
Once it's installed portupgrade expat should do the job.
Hi,
I might be lying to you with my answers. I'm hoping Greg Lehey or some
other Vinum hacker will point anything I get wrong out though :)
On Sat, Mar 20, 2004 at 01:23:53PM -0800, Evan Sayer wrote:
I have a question about how vinum effects access to file systems. When
i have a vinum
On Sat, Mar 20, 2004 at 08:57:38AM +1030, Greg 'groggy' Lehey wrote:
On Friday, 19 March 2004 at 3:03:34 +, Lewis Thompson wrote:
In a reply to my original question you stated that ``dd if=ad3 of=ad1
bs=8192 conv=noerror'' ``may or may not work, depending on details you
haven't
On Fri, Mar 19, 2004 at 05:24:59PM -0600, Tillman Hodgson wrote:
On Fri, Mar 19, 2004 at 05:35:06PM -0500, Al Johnson wrote:
My standard response to top-posting:
A: Because it reverses the logical flow of conversation.
Q: Why is putting a reply at the top of the message frowned upon?
A:
On Thu, Mar 18, 2004 at 01:26:02PM +1030, Greg 'groggy' Lehey wrote:
On Tuesday, 16 March 2004 at 17:25:26 +, Lewis Thompson wrote:
I can't think of anything else. Originally I ran dd without the
conv=noerror and it stopped at around 25GB (the disk is a 100GB). The
destination disk
Hi,
This is the first time I've looked at gif tunnels and I'm only trying to
do something simple (by that I mean no IPsec, etc.)
Diagrams are always useful for this, so here goes:
(int) (ext) (ext) (int)
xl0 192.168.0.1 xl1 a.b.c.d - 'net -
Hi,
This is the first time I've looked at gif tunnels and I'm only trying to
do something simple (by that I mean no IPsec, etc.)
Diagrams are always useful for this, so here goes:
(int) (ext) (ext) (int)
xl0 192.168.0.1 xl1 a.b.c.d - 'net -
On Tue, Mar 16, 2004 at 07:13:25PM +0800, Greg Lehey wrote:
On Tuesday, 16 March 2004 at 2:00:00 +, Lewis Thompson wrote:
I had a failed disk in my RAID-0 Vinum array. This was a physical disk
problem and in an attempt to recover as much data as possible I dd'ed it
to another disk (dd
Hi,
I had a failed disk in my RAID-0 Vinum array. This was a physical disk
problem and in an attempt to recover as much data as possible I dd'ed it
to another disk (dd if=ad3 of=ad1 bs=8192 conv=noerror).
This has mostly gone fine (bar the I/O errors that were to be
expected) and I can
On Tue, Mar 16, 2004 at 02:00:00AM +, Lewis Thompson wrote:
This has mostly gone fine (bar the I/O errors that were to be
expected) and I can actually start vinum and mount the RAID-0 array with
no trouble (Vinum reports no errors I can see). I don't really know how
I can test
Hi,
I've just had a disk (pretty much) fail on me.
I'd been suspect of it for some time now, but finally confirmed it
with a reinstall to 5.2.1 when GEOM started removing it for me ;) Some
more tests with smartmontools (http://smartmontools.sourceforge.net/)
indicate read failures at the same
On Mon, Mar 08, 2004 at 03:11:14AM -0700, RYAN vAN GINNEKEN wrote:
[snip]
Also i have the same problems with my nfs mounts if a machine goes
down somewhere now of my other machines will reboot.
Have you tried mounting with the -s option? Check the man page for
soft.
-lewiz.
--
I was so much
On Sun, Mar 07, 2004 at 11:28:03PM -0500, JJB wrote:
Right at the beginning of sysinstall should be warning about what
to set PC bios options to, like plugNplay off, power management off,
boot time virus check disabled, PCI irq assignments set to auto, OS
type set to non-windows, ect. Give
On Mon, Mar 08, 2004 at 09:53:15AM -0500, Jerry McAllister wrote:
On Sun, Mar 07, 2004 at 11:28:03PM -0500, JJB wrote:
Right at the beginning of sysinstall should be warning about what
to set PC bios options to, like plugNplay off, power management
off, boot time virus check
On Sat, Mar 06, 2004 at 08:09:47PM -0800, Brian Henning wrote:
how can i make it so cd roast burns files with plus
signs in it. for example
/usr/ports/distfiles/gtk+-1.2.10.tar.gz
This should probably be aimed at the xcdroast people since it seems very
specific.
I'm not really sure but is
Hi,
I've just CVSupped to -CURRENT in an attempt to learn more about FreeBSD
development in general.
However, vmware3 no longer works. I get errors about vmnet1 not
existing, yet I have the appropriate entries in /compat/linux/dev.
However, I /do/ have a vmnet4097 when I run ifconfig.
I
On Fri, Mar 05, 2004 at 11:28:17PM +1100, Tony Frank wrote:
On Thu, Feb 26, 2004 at 02:15:14PM +, Lewis Thompson wrote:
i.e. can I create a RAID0 volume from two RAID5 volumes?
I understand this might sound a little odd but if it works it would be
the ideal solution for me. I would
Hi,
I'm interested in setting up a distributed file system across two 5.2.1
machines.
I wanted this to work such that the two machines had /different/ data
but through the use of some software they can be ``mounted'' to provide
a single large volume (almost the same way that the RAID0 works).
Hi,
I've been thinking about this and I'm wondering if it is possible to do
something like the following:
I have an existing RAID5 volume, comprised of just 3 120GB disks.
However, I've just bought three more 250GB disks that I also want to
RAID5.
I would still like a single volume,
On Sat, Feb 21, 2004 at 04:58:53PM -0500, Lowell Gilbert wrote:
Rahul Sawarkar [EMAIL PROTECTED] writes:
is there a framebuffer port for freebsd?
i want to run my console in 1024x768.
Why would you want a framebuffer for that?
Do you have frame grabber hardware or something?
If all
On Tue, Feb 10, 2004 at 10:12:09AM -0500, Lowell Gilbert wrote:
Lewis Thompson [EMAIL PROTECTED] writes:
I am worried that because the script must be read/writeable by the
Apache user (www) that anybody that can write a PHP script on my machine
can read the auth script and read
On Tue, Feb 10, 2004 at 03:56:08PM +, Peter Risdon wrote:
Lewis Thompson wrote:
I am worried that because the script must be read/writeable by the
Apache user (www) that anybody that can write a PHP script on my machine
can read the auth script and read the passwords that would
On Tue, Feb 10, 2004 at 05:52:17PM +0100, Robert Barten wrote:
No need for safe_mode, set
php_admin_value open_basedir /www/dir/to/user/
in your vhost config, add if desired /tmp/phpupload/:/tmp/phpsession/
Yes, I've looked at this. However, I want to use userdir=public_html
for serving PHP
On Tue, Feb 10, 2004 at 09:41:22AM -0600, Eric F Crist wrote:
Check the syntax for the .htaccess files in the httpd.conf file. This
is a file that must be non-readable by regular users via php, but
apache has a filter written within the httpd.conf file to disallow
access. I know it's about
Hi,
I'm trying to write a script to use with the Apache auth plugin
mod_auth_any. I have the whole setup working, bar the script that does
the authentication.
I am worried that because the script must be read/writeable by the
Apache user (www) that anybody that can write a PHP script on my
On Sat, Feb 07, 2004 at 02:43:05PM -0800, Kris Kennaway wrote:
On Sat, Feb 07, 2004 at 12:16:00PM +, Lewis Thompson wrote:
Is there any such thing as screen for X applications?
There's xmove, but it's a bit buggy. It's a great idea though, I wish
someone would make it work better
Hi,
At Kris Kennaway's suggestion I have been trying out xmove, which allows
me to suspend an X app, move it between X displays, etc.
I've got this working great on one machine (actually a jail), where my
sshd_config has:
X11Forwarding yes
X11DisplayOffset 10
X11UseLocalhost no
I start
Hi,
I'm experimenting with X11 forwarding and I have it working so I can ssh
to my server and fire up an application just great. This is forwarded
to my laptop and works fine.
However, I want to run something that is mostly going on in the
background (non-interactive) but my Internet link is
Hi,
I've got a working Apache2 server that I've just recompiled to support
mod_auth_ldap.
The ldap stuff all works great (I'm using it via Samba). However,
when I set up LDAP for authentication in my .htaccess file:
AuthLDAPURL ldap://yellow.lewiz.org/ou=People,dc=lewiz,dc=org?uid
require
On Tue, Jan 20, 2004 at 09:08:53PM +, anubis wrote:
On Tue, 20 Jan 2004 02:26 am, Raphael Dinge wrote:
I've installed a long ago FreeBSD 5.1 on my mother's computer which
is a shuttle with nvidia nforce2 motherboard. The computer crashes
for reasons I can't explain. Since 5.2 was out,
Hi,
I'm trying to create a port and everything is working fine, except that
the pixmaps get installed in /usr/X11R6/share/pixmaps/app instead of
/usr/X11R6/share/gnome/pixmaps/app.
Apart from these pixmaps there is just the application binary itself.
Can anybody suggest how I can get it to
Hi,
I'm having problems with my network connection timing out during large
transfers.
It's connected to a 10Mbit hub so it's not topping out at the card's
maximum throughput.
Originally I had a Realtek 8139 card but yesterday I dumped that in
favour of a Netgear FA311 (sis chipset) and this
Hi,
I have a funky keyboard with lots of buttons along the top (like Back,
Forward, Stop, Refresh, etc.). I use a number of these in fluxbox by
defining them in my keys file.
However -- can anybody suggest a way I can make the XF86Back key work
in firebird? Previously I have hacked the
Hi,
I'm currently using vinum to concatenate two large (120GB) disks,
providing a single large(r) valume (240GB in theory ;).
At the moment the volume is about 90% full and I'm looking to add
three more 120GB disks and set up RAID5. This is somewhat offtopic (not
entirely sure if it is
On Sun, Dec 07, 2003 at 01:11:40PM +0300, Lev Klimin wrote:
then natd don't change source address, and ping don't work. I thinked
that natd must do NAT whenever and wherever it work. May I be
mistaken?
You may be. I had a problem a few months ago that seemed very similar.
In the end I gave up
Hi,
I'm looking for a usable frontend to Samba, allowing me to see people
accessing shares, details of files that are open, etc. I don't really
care if it's console of GUI (Qt, GTK+, anything) but it would be great
if it could run from the log files (allowing me to run from another
machine from
On Mon, Dec 01, 2003 at 03:47:00PM -0800, Kevin Stevens wrote:
On Mon, 1 Dec 2003, Lewis Thompson wrote:
I'm looking for a usable frontend to Samba, allowing me to see people
accessing shares, details of files that are open, etc. I don't really
Can you describe what you're looking
Hi,
Just a quick question -- when using IPsec on my LAN I'm finding I get
short jumps in films, music, etc. when the key renegotiation takes
place.
I understand this is quite necessary, but can anybody recommend any
way to reduce the delay, or remove it totally (short of having much
larger
Hi,
I'm wondering if the following situation would be possible:
I have a small LAN (one server, three workstations) and want to fully
encrypt it (since it's quite easy for somebody to plug into my switch --
I'm at university and the machines are in my room).
What I would like is for my
1 - 100 of 157 matches
Mail list logo
