2017-07-05 13:32 GMT+02:00 Charles Lepple <clep...@gmail.com>:
> On Jul 5, 2017, at 7:05 AM, Andrea de Lutti <adelu...@gmail.com> wrote:
> >
> > Which are the ups.status I can use with ups in dummy mode?
> > I have seen only OB, LB, OL...
> >
> T
Thank you lots! Finally I have everything working!
Which are the ups.status I can use with ups in dummy mode?
I have seen only OB, LB, OL...
thank you
Andrea
2017-07-04 19:55 GMT+02:00 Charles Lepple <clep...@gmail.com>:
> On Jul 3, 2017, at 11:06 AM, Andrea de Lutti <adelu...@gmai
>
>
>
> MONITOR dummy@artu 1 user pass master
>> SHUTDOWNCMD "/sbin/shutdown -h +0"
>> NOTIFYCMD /usr/local/bin/upssched-script
>>
>
> Hi, As far as I can see, what you are getting in syslog corresponds
> correctly to what you have specified. You have specified that upsmon is to
> call
3 16:19:15 artu upssched-cmd: Unrecognized command: UPS dummy@artu
battery is low
I have tried so many commands, but always the same result...
PS: this evening I will change the battery, I have some standby/cycle
voltage declared by the manufacturer: should I use them?
Thank you,
Regards
A
> > , but when in battery test I have OL CAL status: it would be good to
> have the result.
>
> "OL CAL" or "OB CAL"? If the UPS is powering the load from the battery
> during calibration, it should report "OB CAL". The ONBATT handler in
> NOTIFYCMD can check for CAL at that point.
>
> I don't
t 7:03 AM, Andrea de Lutti <adelu...@gmail.com> wrote:
> >
> > Are there no warnings for battery test?
>
> not sure if you saw my reply on 2016-06-17:
>
> Do you mean a notification that a test is in progress, or something for
> the results?
>
> There is the REPLBA
ail.com;
Are there no warnings for battery test?
Thank you,
Andrea
2017-06-16 15:19 GMT+02:00 Andrea de Lutti <adelu...@gmail.com>:
> Thanks mates,
> as suggested I have added
>
> runtimecal = 240,100,720,50
> default.battery.voltage.low = 10.4
> default.
a deep test.
Is there a way to add a NOTIFYMSG value for the battery test?
Thank you lots
Andrea
2017-06-16 14:50 GMT+02:00 Charles Lepple <clep...@gmail.com>:
> On Jun 16, 2017, at 2:20 AM, Andrea de Lutti <adelu...@gmail.com> wrote:
> > Using 'guestimation' (low: -0.86
, high: -1.08)!
Initial battery charge undetermined
Driver failed to start (exit status=1)
What should I do?
Thanks again,
Andrea
2017-06-12 12:34 GMT+02:00 Manuel Wolfshant <wo...@nobugconsulting.ro>:
> On 06/12/2017 12:56 PM, Andrea de Lutti wrote:
>
>
>
>> > I ha
, high: -1.08)!
Initial battery charge undetermined
Driver failed to start (exit status=1)
What should I do?
Thanks again,
Andrea
2017-06-12 17:34 GMT+02:00 Andrea de Lutti <adelu...@gmail.com>:
> Thanks a lot, I will do it and keep you informed.
> Best regards
>
> Andrea
&g
Thanks a lot, I will do it and keep you informed.
Best regards
Andrea
2017-06-12 12:34 GMT+02:00 Manuel Wolfshant <wo...@nobugconsulting.ro>:
> On 06/12/2017 12:56 PM, Andrea de Lutti wrote:
>
>
>
>> > I have also successfully tested the battery...
>> >
>
> > root@artu:~# upsc Elit@artu
> > Init SSL without certificate database
> > battery.voltage: 13.90
> > battery.voltage.high: -1.08
> > battery.voltage.low: -0.87
> > device.type: ups
> > driver.name: blazer_usb
> > driver.parameter.pollinterval: 2
> > driver.parameter.port: auto
> >
Soseems so better...
Each time I rebbot, I miss the /var/run/nut folder...
root@artu:~# upsdrvctl start
Network UPS Tools - UPS driver controller 2.7.2
Network UPS Tools - Megatec/Q1 protocol USB driver 0.11 (2.7.2)
Can't chdir to /var/run/nut: No such file or directory
Driver failed to
>
> hmm, apparently the UPS doesn't close the replies to our queries with
> the expected CR and we (I) did not consider that case in nutdrv_qx --
> noted:
> https://github.com/networkupstools/nut/issues/441
>
> But blazer_usb, being less strict on the terminating CR of Q1 replies,
> should work
Use the name from ups.conf in front of "@localhost".
The result is quite different ;)
root@artu:~# upsc Elit@artu
Init SSL without certificate database
Error: Driver not connected
> What if you try nutdrv_qx without specifying megatec? (It should
> autodetect.)
>
Here is the result:
Hi, I have tried several drivers for make my Elite UPS working.
With blazer_usb I can contact it, but I have no informations. This is the
best result.
OS: Ubuntu Xenial 16.04.2 LTS
NUT Version: Nut 2.7.2-4Ubuntu1 (Installed from Ubuntu Software Center)
Device name: Elite UPS 800VA
16 matches
Mail list logo
