Hi. I've got a big problem. I can't tune in any radio stations with my pretty new PCTV Pro. I'm using bttv 0.7.106 ( also tried with 105, 104, 103 ... and with patch-2.4.20-kraxel ). I've been playing with module options - without any success. All I can tune in is static noise, and sometimes the sound of some TV stations - but very noisy. Radio works perfectly under Windows XP.
dmesg says: Linux video capture interface: v1.00 i2c-core.o: i2c core module i2c-algo-bit.o: i2c bit algorithm module bttv: driver version 0.7.106 loaded bttv: using 4 buffers with 2080k (8320k total) for capture bttv: Host bridge is Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge bttv: Host bridge needs ETBF enabled. bttv: Bt8xx card found (0). PCI: Found IRQ 12 for device 00:0d.0 PCI: Sharing IRQ 12 with 00:04.2 PCI: Sharing IRQ 12 with 00:09.0 PCI: Sharing IRQ 12 with 00:0d.1 bttv0: Bt878 (rev 17) at 00:0d.0, irq: 12, latency: 32, mmio: 0xd7000000 bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 bttv0: using: BT878(Pinnacle PCTV Studio/Ra) [card=39,autodetected] bttv0: enabling ETBF (430FX/VP3 compatibilty) bttv0: gpio: en=00000000, out=00000000 in=00fffbdf [init #1] bttv0: gpio: en=00000000, out=00000000 in=00fffbdf [init #1] bttv0: gpio: en=00000000, out=00000000 in=00fffbdf [init #2] i2c-algo-bit.o: Adapter: bt848 #0 scl: 1 sda: 1 -- testing... i2c-algo-bit.o:1 scl: 1 sda: 0 i2c-algo-bit.o:2 scl: 1 sda: 1 i2c-algo-bit.o:3 scl: 0 sda: 1 i2c-algo-bit.o:4 scl: 1 sda: 1 i2c-algo-bit.o: bt848 #0 passed test. i2c-core.o: adapter bt848 #0 registered as adapter 0. bttv0: i2c: checking for MSP34xx @ 0x80... found bttv0: pinnacle/mt: id=2 info="PAL+SECAM / stereo" radio=yes bttv0: using tuner=33 bttv0: i2c: checking for MSP34xx @ 0x80... found i2c-core.o: driver i2c msp3400 driver registered. msp34xx: init: chip=MSP3410G-B11 +nicam +simple +radio msp3410: daemon started bttv0: i2c attach [client=MSP3410G-B11] i2c-core.o: client [MSP3410G-B11] registered to adapter [bt848 #0](pos. 0). bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z i2c-core.o: driver generic i2c audio driver registered. i2c-core.o: driver i2c tda9887 driver registered. tda9887: probing bt848 #0 i2c adapter [id=0x10005] tda9887: chip found @ 0x86 bttv0: i2c attach [client=tda9887] i2c-core.o: client [tda9887] registered to adapter [bt848 #0](pos. 1). i2c-core.o: driver i2c TV tuner driver registered. tuner: probing bt848 #0 i2c adapter [id=0x10005] tuner: chip found @ 0xc0 tuner: type set to 33 (MT2032 universal) MT2032: Companycode=4d54 Part=04 Revision=04 MT2032 hexdump: 1b 42 20 0f 1f f7 f4 0c c3 4e ec 18 0e 32 2e 00 ff 4d 54 04 04 mt2032: xogc = 0x07 mt2032: xok = 0x00 mt2032: xogc = 0x06 mt2032: xogc = 0x06 mt2032: xok = 0x00 mt2032: xogc = 0x05 mt2032: xogc = 0x05 mt2032: xok = 0x00 mt2032: xogc = 0x04 mt2032: xogc = 0x04 mt2032: xok = 0x00 mt2032: xogc = 0x03 tuner: pinnacle pal bttv0: i2c attach [client=MT2032 universal] i2c-core.o: client [MT2032 universal] registered to adapter [bt848 #0](pos. 2). MT2032: Companycode=4d54 Part=04 Revision=04 MT2032 hexdump: 1b 42 ff 0f 1f f7 e4 8c c3 4e ec 18 0e 32 28 22 ff 4d 54 04 04 mt2032: xogc = 0x07 mt2032: xok = 0x00 mt2032: xogc = 0x06 mt2032: xogc = 0x06 mt2032: xok = 0x00 mt2032: xogc = 0x05 mt2032: xogc = 0x05 mt2032: xok = 0x00 mt2032: xogc = 0x04 mt2032: xogc = 0x04 mt2032: xok = 0x00 mt2032: xogc = 0x03 bttv0: bt848_muxsel 1 bttv0: gpio: en=0003000f, out=00000000 in=00fcfbd0 [audio: extern] bttv0: gpio: en=0003000f, out=00000000 in=00fcfbd0 [muxsel] bttv0: PLL: 28636363 => 35468950 .. ok bttv0: gpio: en=0003000f, out=0000000a in=00fcfbd0 [audio: off] bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 tuner: tv freq set to 400.00 mt2032_set_if_freq rfin=400000000 if1=1090000000 if2=38900000 from=32900000 to=39900000 mt2032: rfin=400000000 lo1=284 lo1n=35 lo1a=4 sel=3, lo1freq=1491000000 mt2032: rfin=400000000 lo2=200 lo2n=25 lo2a=0 num=1512 lo2freq=1052100000 spurcheck f1=1491000 f2=1052100 from=32900 to=39900 spurtest n1=1 n2=-2 ftest=-613200 spurtest n1=1 n2=-3 ftest=-1665300 spurtest n1=1 n2=-4 ftest=-2717400 spurtest n1=1 n2=-5 ftest=-3769500 spurtest n1=2 n2=-3 ftest=-174300 spurtest n1=2 n2=-4 ftest=-1226400 spurtest n1=2 n2=-5 ftest=-2278500 spurtest n1=3 n2=-4 ftest=264600 spurtest n1=3 n2=-5 ftest=-787500 spurtest n1=4 n2=-5 ftest=703500 mt2032 Reg.E=0x38 mt2032: pll wait 1ms for lock (0x38) mt2032 Reg.E=0x3e mt2032 Reg.F=0x01 bttv0: bt848_muxsel 0 bttv0: gpio: en=0003000f, out=0000000a in=00fcfbd0 [audio: off] bttv0: gpio: en=0003000f, out=0000000a in=00fcfbd0 [muxsel] Trying to tune Radio Danobius for example (working in Win) tuner: radio freq set to 103.50 mt2032_set_if_freq rfin=103500000 if1=1085000000 if2=33300000 from=33300000 to=33300000 mt2032: rfin=103500000 lo1=226 lo1n=28 lo1a=2 sel=4, lo1freq=1186500000 mt2032: rfin=103500000 lo2=199 lo2n=24 lo2a=7 num=3564 lo2freq=1049700000 spurcheck f1=1186500 f2=1049700 from=33300 to=33300 spurtest n1=1 n2=-2 ftest=-912900 spurtest n1=1 n2=-3 ftest=-1962600 spurtest n1=1 n2=-4 ftest=-3012300 spurtest n1=1 n2=-5 ftest=-4062000 spurtest n1=2 n2=-3 ftest=-776100 spurtest n1=2 n2=-4 ftest=-1825800 spurtest n1=2 n2=-5 ftest=-2875500 spurtest n1=3 n2=-4 ftest=-639300 spurtest n1=3 n2=-5 ftest=-1689000 spurtest n1=4 n2=-5 ftest=-502500 mt2032 Reg.E=0x2e mt2032 Reg.F=0x00 bttv0: gpio: en=0003000f, out=00010001 in=00fcfbd0 [audio: radio] I'd be so glad listening to radio without Windows. Can anybody help me? Thanx Tom -- video4linux-list mailing list Unsubscribe mailto:[EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/video4linux-list
