Be careful: it used to be the case that a CRLF was put every 80 chars or so (can’t remember the exact number) At some point (v15?) this was no longer the case: no CRLF’s at all.
At least here in Belgium, it caused a lot of problems because the software at the internet provider’s side didn’t interpret this in the correct way, which caused the e-mails to be unreadable. Regards, Rudy Mortier Two Way Communications bvba > On 18 Apr 2018, at 18:33, John DeSoi via 4D_Tech <4d_tech@lists.4d.com> wrote: > > Maybe this change in 16.3 HF2? > >> >> ACI0097778 "BASE64 ENCODE" command inserts CRLF characters every 40000 >> characters. The new behaviour is that no more CRLF is inserted by the >> command. If CRLF is needed, it's up to the develop to insert it. > > https://bugs.4d.fr/fixedbugslist?Version=16.3_HF2 > > > John DeSoi, Ph.D. > > >> On Apr 18, 2018, at 11:12 AM, Dave Nasralla via 4D_Tech >> <4d_tech@lists.4d.com> wrote: >> >> The problem I am running into is that the body text is now rendered in >> an email like as Base64 Encoded. > > ********************************************************************** > 4D Internet Users Group (4D iNUG) > FAQ: http://lists.4d.com/faqnug.html > Archive: http://lists.4d.com/archives.html > Options: https://lists.4d.com/mailman/options/4d_tech > Unsub: mailto:4d_tech-unsubscr...@lists.4d.com > ********************************************************************** ********************************************************************** 4D Internet Users Group (4D iNUG) FAQ: http://lists.4d.com/faqnug.html Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:4d_tech-unsubscr...@lists.4d.com **********************************************************************