Hello, I bought a Compaq iPaq H3650 to install Plan 9.
After some difficulties, I successfully compiled 9bitsy and paqdisk from a current Plan 9. Plan 9 is now running fine on my Bitsy. I also tried old 9bitsy and paqdisk from John and Nemo, they are working well too. As recommended, I also bought a Lucent ORiNOCO Classic Gold PC Card to use Wi-Fi. However, I haven't succeeded to make the Wi-Fi work on my Bitsy. During the boot, I can see some error messages on the serial console: increfp 0 increfp full power wavelanreset, iob 0xa0204000 #l0: exec#l0: init failed ing cmd 0000: 0000 echo: write error: couldn't configure devdecrefp 0 ice increfp power down bind: #l0: no free devices ipconfig: /net/ipifc/clone: bind ether /net/ether0: '/net/ether0' file does not exist ndb/dns: can't read my ip address The card seems to be visible from Plan 9: bitsy# grep Wave /dev/pcm0ctl version Lucent Technologies;WaveLAN/IEEE;Version 01.01; I tried manually to run the card, but I get these error messages again: bitsy# echo -n 'configure #l0 wavelan' > /dev/pcm0ctl echo: write error: couldn't configure device bitsy# bind -a '#l0' /net bind: #l0: no free devices I get exactly the same errors from Nemo's (May 2003) and John's (March 2004) 9bitsy and paqdisk. How can I solve this problem? Thank you. -- David du Colombier
