Thanks, will go back and play - I see what you're saying. - JQ
> From: "Tellekson, Eric G." <eric.tellek...@sdstate.edu> > Date: Wed, 1 Sep 2010 16:59:50 -0500 > To: John Quebedeaux <jo...@lsu.edu>, Christoph Willing <c.will...@uq.edu.au> > Cc: AG-TECH list <ag-t...@mcs.anl.gov> > Subject: RE: [AG-TECH] Multiple Blackmagic Cards - One more Question > > Chris and John, > > Yes, the HD-SDI and HD-Component outputs work at the same time on the Sony > EVI-HD1. We are using both at the same time at our site. > > Since the Component is HD-Component it outputs at the same time as the HD-SDI > in the HD modes. In the SD modes you can use Composite and S-video at the same > time. > > The camera will output only HD or SD video though so you cannot output HD-SDI > and composite at the same time. > > The signal formats are switchable but HD-SDI and HD-Component us the same > format and there is nowhere to select what port the signal outputs from (i.e. > SDI or Component, Composite or S-video). > > The switch settings are below: > HD Mode: 1080/59.94i, 1080/50i, 1080/29.97p, 1080/25p, 720/59.94p, 720/50p, > 720/29.97p, 720/25p. > SD Mode: NTSC and PAL - Each with options for 16:9 to 4:3(Letter Box, Crop, or > Squeeze) > > We used a Lenkeng LKV7611 - Component to Composite & S-Video Converter to down > convert to SD. (Works well for under $50) > > -Eric > > Eric Tellekson > Communications Technician > Classroom Technology Services > South Dakota State University > Pugsley Center 212, Box 2218A > Brookings, SD 57007 > > Phone: 605.688.5747 > Email: eric.tellek...@sdstate.edu > > > > > -----Original Message----- > From: John I. Quebedeaux, Jr [mailto:jo...@lsu.edu] > Sent: Wednesday, September 01, 2010 4:21 PM > To: Christoph Willing; Tellekson, Eric G. > Cc: AG-TECH list > Subject: Re: [AG-TECH] Multiple Blackmagic Cards - One more Question > > I too thought I could only get one out of the camera at a time... Had to > manually switch... > > -John Q. > > >> From: Christoph Willing <c.will...@uq.edu.au> >> Date: Thu, 2 Sep 2010 07:10:49 +1000 >> To: "Tellekson, Eric G." <eric.tellek...@sdstate.edu> >> Cc: AG-TECH list <ag-t...@mcs.anl.gov> >> Subject: Re: [AG-TECH] Multiple Blackmagic Cards - One more Question >> >> >> On 02/09/2010, at 5:33 AM, Tellekson, Eric G. wrote: >> >>> Todd, >>> Here is our combination @ South Dakota State University. >>> - Sony EVI-HD1 @ 3 >>> - Blackmagic Decklink SDI cards @ 3 >>> >>> We simultaneously use the HD-SDI out of the cameras to the black >>> magic cards as well as the HD-Component out and down convert it to >>> NTSC Composite into a Viewcast Osprey 440. >> >> >> Eric, >> >> Could you confirm that you're deriving both HD-SDI and HD-Component >> from the camera at the same time? I had a loan of a Sony EVI-HDI and >> found that the different output formats were only switchable i.e. only >> one format at a time. Maybe the one I had was an older one .... >> >> >> chris >> >> >>> -----Original Message----- >>> From: ag-tech-boun...@lists.mcs.anl.gov >>> [mailto:ag-tech-boun...@lists.mcs.anl.gov >>> ] On Behalf Of Todd Zimmerman >>> Sent: Wednesday, September 01, 2010 1:03 PM >>> Cc: ag-t...@mcs.anl.gov >>> Subject: [AG-TECH] Multiple Blackmagic Cards - One more Question >>> >>> Sorry all - one more question. >>> >>> What combination of camera/Blackmagic card are you all using? >>> >>> Todd >>> >>> >>> -- >>> Collaboration & Visualization Specialist >>> UBC Okanagan ITServices - http://web.ubc.ca/okanagan/itservices/ >>> WestGrid - http://www.westgrid.ca >>> Compute Canada - http://computecanada.org >>> Todd Zimmerman | 250.807.9979 | todd.zimmer...@ubc.ca >> >> Christoph Willing +61 7 3365 8316 >> QCIF Access Grid Manager >> University of Queensland >> >
