Chris and John, Yes, the HD-SDI and HD-Component outputs work at the same time on the Sony EVI-HD1. We are using both at the same time at our site.
Since the Component is HD-Component it outputs at the same time as the HD-SDI in the HD modes. In the SD modes you can use Composite and S-video at the same time. The camera will output only HD or SD video though so you cannot output HD-SDI and composite at the same time. The signal formats are switchable but HD-SDI and HD-Component us the same format and there is nowhere to select what port the signal outputs from (i.e. SDI or Component, Composite or S-video). The switch settings are below: HD Mode: 1080/59.94i, 1080/50i, 1080/29.97p, 1080/25p, 720/59.94p, 720/50p, 720/29.97p, 720/25p. SD Mode: NTSC and PAL - Each with options for 16:9 to 4:3(Letter Box, Crop, or Squeeze) We used a Lenkeng LKV7611 - Component to Composite & S-Video Converter to down convert to SD. (Works well for under $50) -Eric Eric Tellekson Communications Technician Classroom Technology Services South Dakota State University Pugsley Center 212, Box 2218A Brookings, SD 57007 Phone: 605.688.5747 Email: eric.tellek...@sdstate.edu -----Original Message----- From: John I. Quebedeaux, Jr [mailto:jo...@lsu.edu] Sent: Wednesday, September 01, 2010 4:21 PM To: Christoph Willing; Tellekson, Eric G. Cc: AG-TECH list Subject: Re: [AG-TECH] Multiple Blackmagic Cards - One more Question I too thought I could only get one out of the camera at a time... Had to manually switch... -John Q. > From: Christoph Willing <c.will...@uq.edu.au> > Date: Thu, 2 Sep 2010 07:10:49 +1000 > To: "Tellekson, Eric G." <eric.tellek...@sdstate.edu> > Cc: AG-TECH list <ag-t...@mcs.anl.gov> > Subject: Re: [AG-TECH] Multiple Blackmagic Cards - One more Question > > > On 02/09/2010, at 5:33 AM, Tellekson, Eric G. wrote: > >> Todd, >> Here is our combination @ South Dakota State University. >> - Sony EVI-HD1 @ 3 >> - Blackmagic Decklink SDI cards @ 3 >> >> We simultaneously use the HD-SDI out of the cameras to the black >> magic cards as well as the HD-Component out and down convert it to >> NTSC Composite into a Viewcast Osprey 440. > > > Eric, > > Could you confirm that you're deriving both HD-SDI and HD-Component > from the camera at the same time? I had a loan of a Sony EVI-HDI and > found that the different output formats were only switchable i.e. only > one format at a time. Maybe the one I had was an older one .... > > > chris > > >> -----Original Message----- >> From: ag-tech-boun...@lists.mcs.anl.gov >> [mailto:ag-tech-boun...@lists.mcs.anl.gov >> ] On Behalf Of Todd Zimmerman >> Sent: Wednesday, September 01, 2010 1:03 PM >> Cc: ag-t...@mcs.anl.gov >> Subject: [AG-TECH] Multiple Blackmagic Cards - One more Question >> >> Sorry all - one more question. >> >> What combination of camera/Blackmagic card are you all using? >> >> Todd >> >> >> -- >> Collaboration & Visualization Specialist >> UBC Okanagan ITServices - http://web.ubc.ca/okanagan/itservices/ >> WestGrid - http://www.westgrid.ca >> Compute Canada - http://computecanada.org >> Todd Zimmerman | 250.807.9979 | todd.zimmer...@ubc.ca > > Christoph Willing +61 7 3365 8316 > QCIF Access Grid Manager > University of Queensland >
