We seem to have our bridge working now. It looks like a network configuration 
problem on the machine itself. If someone could select UTAH_CHPC, after you 
purge your bridge cache to refresh, as your bridge, you should see the bridge 
address (155.101.28.50) at the bottom of the main VIC window. You bridge list 
should see UTAH_CHPC as enabled with a valid ping time.

Thanks,
Jimmy

 --
Jimmy Miklavcic
Multimedia Specialist
[email protected]<mailto:[email protected]>

UNIVERSITY OF UTAH
CTR FOR HIGH PERFORM COMPUTING
155 SOUTH 1452 EAST RM 405
SALT LAKE CITY, UT 84112-0190

Office: 801.585.9335
 Fax: 801.585.5366

http://www.anotherlanguage.org<http://www.anotherlanguage.org/>




  _____

   From: [email protected] 
[mailto:[email protected]] On Behalf Of Jimmy Miklavcic
   Sent: Tuesday, October 06, 2009 10:35 AM
   To: [email protected]
   Subject: Re: [AG-TECH] Bridge question.


   We're finding that our bridge, UTAH_CHPC, is Unreachable according to the 
venue client. We have verified this locally, from Australia and Kansas. So my 
question is, if one can successfully ping the bridge manually, why can't the 
venue client get a successful ping?

   Jimmy

    --
   Jimmy Miklavcic
   Multimedia Specialist
   [email protected]<mailto:[email protected]>

   UNIVERSITY OF UTAH
   CTR FOR HIGH PERFORM COMPUTING
   155 SOUTH 1452 EAST RM 405
   SALT LAKE CITY, UT 84112-0190

   Office: 801.585.9335
    Fax: 801.585.5366

   http://www.anotherlanguage.org<http://www.anotherlanguage.org/>




     _____

      From: [email protected] 
[mailto:[email protected]] On Behalf Of Jimmy Miklavcic
      Sent: Monday, October 05, 2009 9:42 AM
      To: [email protected]
      Subject: [AG-TECH] Bridge question.



      We are running our own bridge, on Red Hat,here at Utah. It runs on the 
same subnet as my AG system. I activate unicast and select our bridge 
(UTAH_CHPC) the venue client does not reset the vic and rat as it normally does 
when I select other bridges. So I force the update by selecting GO. When I do 
this, usually I will se the IP address of the bridge in the vic and rat 
windows, but for our bridge, I see a multicast address. So now I'm really 
confused.

      Has anyone run into this symptom at all? Could someone test this out from 
the outside. Our bridge is registered and the IP is 155.101.28.50.

      Thanks,

      Jimmy


       --
      Jimmy Miklavcic
      Multimedia Specialist
      [email protected]<mailto:[email protected]>

      UNIVERSITY OF UTAH
      CTR FOR HIGH PERFORM COMPUTING
      155 SOUTH 1452 EAST RM 405
      SALT LAKE CITY, UT 84112-0190

      Office: 801.585.9335
       Fax: 801.585.5366

      http://www.anotherlanguage.org<http://www.anotherlanguage.org/>



<<attachment: Blank Bkgrd.gif>>

Reply via email to