Hi Colin, That's weird behaviour as /usr/bin/vic is used for both AG 2.4 and AG 3.1.
Are you using V4L or V4L2 (or more importantly the same V4L API with both AG 2.4 and AG 3.1) ? I've put up vic-debuginfo-2.8ucl1.3.0-0.1.20071217svn.fc8.i386.rpm in http://www.vislab.uq.edu.au/ag3/fedora/development/RPMS/ it might provide some useful debugging info, to install it, download it and issue: rpm -e --nodeps vic rpm -ivh vic-debuginfo-2.8ucl1.3.0-0.1.20071217svn.fc8.i386.rpm to revert back, issue: rpm -e --nodeps vic-debuginfo yum install vic Cheers, Doug > -----Original Message----- > From: owner-ag-t...@mcs.anl.gov [mailto:owner-ag-t...@mcs.anl.gov] On > Behalf Of Jason Bell > Sent: Wednesday, 30 January 2008 9:28 AM > To: Colin Campbell; ag-t...@mcs.anl.gov > Subject: RE: [AG-TECH] AG Tk 2.4 Video Mute > > G'day Colin > > Can I ask a couple quick questions? > > * Are you using unicast or multicast when this happens, or both??? > > * Do you have any other additional devices, such as a usb camera > connected??? > > * Have you tried deleting all of the video producers, then adding > them again through "Configure node services"??? Also tried saving the > configuration using a different default??? > > * Does the device come back correctly if you disable, then enable > video using the buttons on the Venue Client. > > * What type of capture device/s are you currently using??? > > * When you did the system upgrade, I assume you updated to latest > Software and Patches, as defined at http://www.accessgrid.org/node/884? > > If you could provide this additional information, it may help us better > diagnose the problem you are having. > > Thanks, > Jason. > > P.S. In case you might find it useful, there is a Fedora 8 install > guide > for the Access grid which can be found at > http://www.accessgrid.org/f8install, I hope you find it useful. > > -----Original Message----- > From: Colin Campbell [mailto:systemengin...@optusnet.com.au] > Sent: Tuesday, 29 January 2008 08:01 PM > To: ag-t...@mcs.anl.gov > Subject: [AG-TECH] AG Tk 2.4 Video Mute > > Hi Guys > > We are having some trouble with the VIC tool under Fedora 8 with AG 2.4 > > The problem we are seeing is that the video for the cameras displays as > blue > except for the last video stream to load. > Manually releasing and retransmitting the video stream from the VIC > producer > then allows the video to be received. This system was a recent upgrade > from > FC5 in which everything was working fine for 2.4 but the new 3.1 vic > was > getting the unable to open socket error. AG 3.1 all works fine and > displays > the video correctly. > > Can anyone help with this issue or has any one seen this before. > > Kindest Regards > > Colin Campbell > System Engineer > > > >
