G'day Colin Can I ask a couple quick questions?
* Are you using unicast or multicast when this happens, or both??? * Do you have any other additional devices, such as a usb camera connected??? * Have you tried deleting all of the video producers, then adding them again through "Configure node services"??? Also tried saving the configuration using a different default??? * Does the device come back correctly if you disable, then enable video using the buttons on the Venue Client. * What type of capture device/s are you currently using??? * When you did the system upgrade, I assume you updated to latest Software and Patches, as defined at http://www.accessgrid.org/node/884? If you could provide this additional information, it may help us better diagnose the problem you are having. Thanks, Jason. P.S. In case you might find it useful, there is a Fedora 8 install guide for the Access grid which can be found at http://www.accessgrid.org/f8install, I hope you find it useful. -----Original Message----- From: Colin Campbell [mailto:systemengin...@optusnet.com.au] Sent: Tuesday, 29 January 2008 08:01 PM To: ag-t...@mcs.anl.gov Subject: [AG-TECH] AG Tk 2.4 Video Mute Hi Guys We are having some trouble with the VIC tool under Fedora 8 with AG 2.4 The problem we are seeing is that the video for the cameras displays as blue except for the last video stream to load. Manually releasing and retransmitting the video stream from the VIC producer then allows the video to be received. This system was a recent upgrade from FC5 in which everything was working fine for 2.4 but the new 3.1 vic was getting the unable to open socket error. AG 3.1 all works fine and displays the video correctly. Can anyone help with this issue or has any one seen this before. Kindest Regards Colin Campbell System Engineer
