How do I browse the group chats? I have PSI installed and I'm connected to jabber.mcs.anl.gov. I go to Join Group Chat and it asks me for host, room and nickname. There is no way, that I can tell, to browse the group chats.
On 9/28/06, Andrew A Rowley <[email protected]> wrote: > Hi, > > This is odd - this suggests that you cannot connect to the jabber server from > your client (I am fairly sure this is all done on the client side now). It > is worth logging on to the ANL server with another jabber client and seeing > if you can see any rooms for your server in the service discovery. Room > names are the venue name with the spaces removed with your server hostname > appended in brackets (take a look and you should see what I mean). > > Andrew :) > > ============================================ > Access Grid Support Centre, > RSS Group, > Manchester Computing, > Kilburn Building, > University of Manchester, > Oxford Road, > Manchester, > M13 9PL, > UK > Tel: +44(0)161-275 0685 > Email: [email protected] > > > -----Original Message----- > > From: Jeremy Mann [mailto:[email protected]] > > Sent: 27 September 2006 20:00 > > To: Andrew Rowley > > Cc: [email protected] > > Subject: Re: [AG-TECH] AG 2.4 and 3.0 servers > > > > On 9/27/06, Andrew Rowley <[email protected]> wrote: > > > Hi, > > > > > > If you copied your old server config, you will need to change the > > textPort to > > > 5223 (it is probably 8002 or something like that just now). You can run > > your > > > own Jabber server, but anl host one that seems stable (plus there are > > > loads out > > > there) at jabber.mcs.anl.gov. This should be set by default as your > > textHost > > > in your VenueServer.cfg file. > > > > Thanks Andrew. I have changed textPort to 5223 and left the address to > > the ANL jabber server. However, when I enter my Lobby and type > > something it says: > > > > You have to be connected to a venue to send a text message > > > > > > -- > > Jeremy > > -- Jeremy
