Barry, I'm guessing persistence of the settings depends on the driver for the capture card. you might check the OEM website to see if they have a tool for testing the video input and see if that can set the defaults for you.
Hope this helps MYK At 04:03 PM 5/19/2005, Barry Gamblin wrote: >I did this and it worked, but only for that session. Once I exited >the venue and then entered it again, I had black video. I had to >do the steps over again. I can not find anywhere an option to >save the setup. On the menu dialog there is a "default" button, >so I tried clicking that, but it does not do anything. > >Thanks for any help. > >Barry > >|> >|> Barry, >|> >|> Try this: >|> >|> Once your video vic is running and showing a black screen, click the >menu >|> button in that vic >|> Then in the Encoder section click the Options button >|> One of the choices is Configure on Transmit, click to make sure it's >selected >|> Then click the Release button in the Transmission section >|> Then click Transmit >|> >|> This should bring up a set of dialogs for your video card driver that >will >|> allow you to set the port for the card as well as other settings like >|> resolution, white balance hue, etc.... >|> >|> Hope this helps >|> >|> MYK >|> >|> At 09:26 AM 5/13/2005, Barry Gamblin wrote: >|> >|> >|> >|> >|> I am using the winnov videum 4400 quad card and thanks to Tom it >|> >|> is working nicely.... >|> >|> >|> >|> At 04:12 PM 5/12/2005, Darin Oman wrote: >|> >|> >I know there are some people out there using a Windows box as >|> >|> >their video capture machine. What capture cards are people >having >|> >|> >good luck with for >|> >|> >capturing multiple video sources (s-video)? >|> >|> > >|> >|> >Thanks, >|> >|> >Darin >|> >|> >|> >|> >|> >|> ============================================ >|> >|> Cindy Sievers Los Alamos National Laboratory >|> >|> [email protected] Group CCS-1 MS B287 >|> >|> tel:505.665.6602 Advanced Computing >|> >|> fax:505.665.4939 Los Alamos, NM 87544 >|> >|> ============================================ >|> >|> >|> > >|> >I am pretty sure this is the card I have on a Windows XP Dell. My >|> >machine is transmitting black video. What was the fix? >|> > >|> >BTW The video works fine with the INSORS software. >|> > >|> >(Sorry if this has already been discussed. I just joined the list) >|> > >|> >Barry >|> > >|> >Barry S. Gamblin, UNIX Administrator III, [email protected] >|> >High Altitude Observatory - National Center for Atmospheric Research >|> >P.O.Box 3000, Boulder CO 80307-3000 >|> >voice - 303-497-1509 fax - 303-497-1589 >|>
