Hi, Thanks for the feedback. This was due to an error that only became apparent when the load was high on the bridge. It was doing a pointless loop that got bigger as more people joined, and so resulted in the socket timeing out before the results were returned.
This has now been fixed, so thanks to everyone that was trying this for a quick bug fix! Let me know of any other problems... Andrew :) ============================================ Access Grid Support Centre, RSS Group, Manchester Computing, Kilburn Building, University of Manchester, Oxford Road, Manchester, M13 9PL, UK Tel: +44(0)161-275 0685 Email: [email protected] -----Original Message----- From: Andrew Patrick [mailto:[email protected]] Sent: 02 February 2005 15:53 To: Andrew Rowley Subject: Re: [AG-TECH] New StaticBridge Service Announcement Hi; I tried your new bridge service yesterday and today and I am getting errors from the web site when I request that a bridge be started. There is a very long pause before the web site returns a response (if at all), and the response is usually an error message: Unknown Error An unknown error has been detected. Please go back and try again If you do not think that you should be getting this error, please contact us. Click here to return to the bridge setup page. This seems to occur for both manual and preset bridges. Andrew Rowley wrote: > (Apologies for cross posting) > > I am pleased to announce a new experimental multicast-unicast bridge > service > (operated on a "best efforts" basis) offered by the Access Grid Support > Centre. This is usable by AG nodes, PIGs or desktop AG without the need to > register with us. It should be stressed that this is being offered on an > experimental basis, as only basic testing has been done on this service. > The service is available here: > http://www.agsc.ja.net/services/staticbridge.php > > This is similar to the previously introduced rcBridge service in that it > allows users to set up a bridge on our server using a web interface. In > the > same way as rcBridge, this must be set up from the machine that is to use > the bridge. > > There are two main differences between this service and the rcBridge. > Firstly, and most importantly, the ports that are used by this bridge are > always the same, regardless of the virtual venue. This is particularly > useful for people situated behind a firewall, as they will only be required > to open up four ports for audio and video when using this bridge with any > venue. > > You don't need to contact us before you use the bridge, but if you need > help > or have any problems, then feel free to let us know - our contact details > are here: http://www.agsc.ja.net/contactUs/details.php > It would also be great to know if you are using the bridge successfully and > what you think of this service. > > I look forward to the feedback on this service. > > Andrew G D Rowley :) > > ============================================ > Access Grid Support Centre, > RSS Group, > Manchester Computing, > Kilburn Building, > University of Manchester, > Oxford Road, > Manchester, > M13 9PL, > UK > Tel: +44(0)161-275 0685 > Email: [email protected] > -- Andrew Patrick, Ph.D. Senior Scientist Information Security Group, Institute for Information Technology National Research Council (NRC), Ottawa, Canada E-mail: [email protected] WWW - NRC: http://iit-iti.nrc-cnrc.gc.ca WWW - Personal: http://www.andrewpatrick.ca Phone: (613) 991-3374 Fax: (613) 952-7151 Cell/SMS: (613) 277-9211
