i see what you mean. now that i've used this system a bit more, i recognise that i'm a similare situation.
with the Osprey XP setup. the settings don't stick. i have two Osprey 100s and each time i change venues, both of my videoProducers default back to the same Osprey card. i also then need to re-submit my VIC rtpEmail info, not once, not twice, but three times. ouch. this is not usable at this point. --fred On Wed, Jun 23, 2004 at 09:37AM, Chris Rosenthal said: > Yes. I know that that's available. That's a real pain to have to do each > time you change venues, though. Also, I kept getting errors when doing it > that way. So, I just dropped back to 2.1.2 and everything seems good in > that respect. > > Maybe 2.2.1 will take care of this. > > Chris > > ------------------------------------------------------------- > Chris Rosenthal [email protected] > Electronic Visualization Lab (312) 996-3002 > University of Illinois at Chicago > > On Tue, 22 Jun 2004, Fred Dech wrote: > > > i just stumbled through this. > > WinXP. add your VideoProducerService for each capture card, then you'll > > have > > some blank 1 Real Vic and 1 or more blank Vics. for each blank Vic, select > > 'Menu' at the bottom, and the 'Devices' drop-down should display all of your > > Ospreys. select a different one for each Vic. > > > > hope that helps. > > > > --fred > > > > On Tue, Jun 22, 2004 at 09:03AM, Duncan Waddell said: > > > Hi learned folks, > > > > > > Add my name to the list too. I also have an urgent need to get an > > > Osprey-100 card working with AGT 2.2 (WinXP). > > > > > > Duncan > > > > > > A Quay wrote: > > > > > > >I have the exact same problem. In a week I have to visit a college in > > > >Miami to install an AG node and really need help on getting four Osprey > > > >100???s working on a WinXP box. > > > > > > > > > > > > > > > >Andy Quay > > > > > > > >Associate Director > > > > > > > >Digital Worlds Institute, University of Florida > > > > > > > > > > > >-----Original Message----- > > > >*From:* Chris Rosenthal [mailto:[email protected]] > > > >*Sent:* Friday, June 18, 2004 3:11 PM > > > >*To:* [email protected] > > > >*Subject:* [AG-TECH] Video Producer Config Help > > > > > > > > > > > > > > > >Hello, > > > > > > > > > > > > > > > >I know there???s been a lot of talk about configuring video capture > > > >devices in Linux. I???ve got four Osprey 100???s on a WinXP node and > > > >the > > > >Video Producer Services always default to the same capture card on AGT > > > >2.2. There doesn???t seem to be the same options for configuring the > > > >sources from the node management dialog (as previous versions). Am I > > > >supposed to enter something in the port text box? Is there a patch out > > > >or coming out soon that makes this easier? > > > > > > > > > > > > > > > >I will really appreciate your help in taking care of this problem. > > > > > > > > > > > > > > > > -- > > > ************************************************************ > > > Duncan Waddell (BSc) > > > Principal Scientific Officer > > > Centre for Microscopy and Microanalysis > > > The University of Queensland. St. Lucia. Qld. 4072 > > > Telephone: +61-7-3365-4216 > > > Facsimile: +61-7-3365-1775 > > > WWW: http://www.uq.edu.au/nanoworld/nanohome.html > > > ************************************************************ > > > Any opinion expressed is that of the writer, > > > and not necessarily that of CMM or of the University. > > > ************************************************************ > > > > -- > > Fred Dech [email protected] > > University of Chicago Dept. of Surgery > > Ph: (773) 834-8359, Fax: (773) 834-8140 > > >
