http://bugzilla.kernel.org/show_bug.cgi?id=9528
------- Comment #73 from [EMAIL PROTECTED] 2008-01-08 15:55 ------- Len, (In reply to comment #69) > Carlos, please > # echo USB0 > /proc/acpi/wakeup > # echo USB2 > /proc/acpi/wakeup > see if those lines in the wakeup file change to "enabled" from "disabled" > and see if that has any effect on the hang. No effect. > Also, does the same driver bind to both of these USB devices? No. > USB0 S3 disabled pci:0000:00:02.0 ohci-hcd (the offending device) > USB2 S3 disabled pci:0000:00:02.1 ehci-hcd (not the problem) So unfortunately, your theory about USB2 being put into D3 when it shouldn't falls apart here - perhaps USB2 shouldn't be put into D3, but this doesn't break the system, since the system suspends and resumes just fine with ehci-hcd loaded. The offending device is USB0, which, as the DSDT points out, can, on XP or above, be put into D3. -- Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ acpi-bugzilla mailing list acpi-bugzilla@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
