http://bugzilla.kernel.org/show_bug.cgi?id=11049
Summary: Error message: ACPI: Resource is not an IRQ entry
Product: ACPI
Version: 2.5
KernelVersion: 2.6.25
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: low
Priority: P1
Component: Config-Interrupts
AssignedTo: [EMAIL PROTECTED]
ReportedBy: [EMAIL PROTECTED]
Latest working kernel version: unknown
Earliest failing kernel version: unknown. 2.6.25 gives the error
Distribution: Debian (but vanilla kernel)
Hardware Environment: IBM xSeries 335
Software Environment: kernel (at boot)
Problem Description: see below
Steps to reproduce: see below
-------
Detailed report:
Kernel 2.6.25 (but probably many other kernels before this one) compiled for
x86, give an error message at boot telling:
ACPI: Resource is not an IRQ entry
on a IBM xSeries 335 machine.
After boot completes, it is possible to see this error and other suspicious
strings using dmesg.
Apparently the machine works, so I am unsure of how serious is this bug, that's
why I have put Severity=Low.
I am attaching the dmesg | grep -i acpi here, and then lspci -vvv below that
one.
Here is the "dmesg | grep -i acpi":
-----------------------------------------------------------------
BIOS-e820: 000000003fffc180 - 0000000040000000 (ACPI data)
ACPI: RSDP 000FDFC0, 0014 (r0 IBM )
ACPI: RSDT 3FFFFF80, 0030 (r1 IBM SERONYXP 1000 IBM 45444F43)
ACPI: FACP 3FFFFF00, 0074 (r1 IBM SERONYXP 1000 IBM 45444F43)
ACPI: DSDT 3FFFC180, 3BB6 (r1 IBM SERTURQU 1000 MSFT 100000B)
ACPI: FACS 3FFFFE40, 0040
ACPI: APIC 3FFFFE80, 0076 (r1 IBM SERONYXP 1000 IBM 45444F43)
ACPI: ASF! 3FFFFDC0, 004B (r16 IBM SERONYXP 1 IBM 45444F43)
ACPI: PM-Timer IO Port: 0x488
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
ACPI: IOAPIC (id[0x0d] address[0xfec01000] gsi_base[16])
ACPI: IOAPIC (id[0x0c] address[0xfec02000] gsi_base[32])
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ3 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: Core revision 20070126
ACPI: bus type pci registered
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Root Bridge [PCI1] (0000:01)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Root Bridge [PCI2] (0000:02)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT]
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP00] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP01] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP02] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP03] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP04] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP05] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [LP06] (IRQs *9)
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP07] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [LP08] (IRQs *10)
ACPI: PCI Interrupt Link [LP09] (IRQs *11)
ACPI: PCI Interrupt Link [LP0A] (IRQs *10)
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP0B] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP0C] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP0D] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP0E] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP0F] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP10] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP11] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP12] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP13] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP14] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP15] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP16] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP17] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP18] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP19] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP1A] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP1B] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP1C] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP1D] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP1E] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP1F] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [LPUS] (IRQs *11)
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: ACPI0007:01 is registered as cooling_device1
ACPI: PCI Interrupt Link [LPUS] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:0f.2[A] -> Link [LPUS] -> GSI 11 (level, low) ->
IRQ 11
ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 22 (level, low) -> IRQ 22
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 24 (level, low) -> IRQ 24
ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 25 (level, low) -> IRQ 25
ACPI: Power Button (FF) [PWRF]
-----------------------------------------------------------------
Here is the lspci -vvv:
-----------------------------------------------------------------
00:00.0 Host bridge: Broadcom CMIC-WS Host Bridge (GC-LE chipset) (rev 13)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel modules: sworks-agp
00:00.1 Host bridge: Broadcom CMIC-WS Host Bridge (GC-LE chipset)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel modules: sworks-agp
00:00.2 Host bridge: Broadcom CMIC-LE
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel modules: sworks-agp
00:01.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
(prog-if 00 [VGA controller])
Subsystem: IBM Unknown device 0240
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at 2200 [size=256]
Region 2: Memory at febff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [5c] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 Host bridge: Broadcom CSB5 South Bridge (rev 93)
Subsystem: Broadcom CSB5 South Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
Kernel driver in use: piix4_smbus
Kernel modules: sworks-agp, i2c-piix4
00:0f.1 IDE interface: Broadcom CSB5 IDE Controller (rev 93) (prog-if 8a
[Master SecP PriP])
Subsystem: Broadcom CSB5 IDE Controller
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 0700 [size=16]
Kernel driver in use: Serverworks_IDE
Kernel modules: serverworks
00:0f.2 USB Controller: Broadcom OSB4/CSB5 OHCI USB Controller (rev 05)
(prog-if 10 [OHCI])
Subsystem: Broadcom OSB4/CSB5 OHCI USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:0f.3 ISA bridge: Broadcom CSB5 LPC bridge
Subsystem: Broadcom Unknown device 0230
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:11.0 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: [60] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=8
Status: Dev=00:00.0 64bit+ 133MHz+ SCD+ USC+ DC=bridge
DMMRBC=512 DMOST=8 DMCRS=8 RSCEM- 266MHz- 533MHz-
Kernel modules: sworks-agp
00:11.2 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: [60] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=8
Status: Dev=00:00.0 64bit+ 133MHz+ SCD- USC- DC=bridge
DMMRBC=512 DMOST=8 DMCRS=8 RSCEM- 266MHz- 533MHz-
Kernel modules: sworks-agp
01:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X
Fusion-MPT Dual Ultra320 SCSI (rev 07)
Subsystem: IBM Unknown device 026d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 72 (4250ns min, 4500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 2300 [size=256]
Region 1: Memory at fbff0000 (64-bit, non-prefetchable) [size=64K]
Region 3: Memory at fbfe0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [68] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=1
Status: Dev=01:01.0 64bit+ 133MHz+ SCD- USC- DC=simple
DMMRBC=2048 DMOST=8 DMCRS=16 RSCEM- 266MHz- 533MHz-
Kernel driver in use: mptspi
Kernel modules: mptspi
02:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703X Gigabit
Ethernet (rev 02)
Subsystem: IBM Unknown device 026f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 24
Region 0: Memory at f9ff0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] PCI-X non-bridge device
Command: DPERE- ERO- RBC=2048 OST=1
Status: Dev=02:01.1 64bit+ 133MHz+ SCD- USC- DC=simple
DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data <?>
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3
Enable-
Address: 0000000100000000 Data: e6d7
Kernel driver in use: tg3
Kernel modules: tg3
02:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703X Gigabit
Ethernet (rev 02)
Subsystem: IBM Unknown device 026f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 25
Region 0: Memory at f9fe0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] PCI-X non-bridge device
Command: DPERE- ERO- RBC=2048 OST=1
Status: Dev=02:02.1 64bit+ 133MHz+ SCD- USC- DC=simple
DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data <?>
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3
Enable-
Address: efcd4ed75dbfbfbc Data: bfe3
Kernel driver in use: tg3
Kernel modules: tg3
-----------------------------------------------------------------
--
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_______________________________________________
acpi-bugzilla mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/acpi-bugzilla
