|
OK, so then I am still not synching with
an external time source. I have followed the steps, and still I get the same
thing. I can not figure out what it causing it to not use the server I specify.
I am guessing it has something to do with some group policy setting? Do I need
to block inheritance on the default domain controller GPO and have different
settings? From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of [EMAIL PROTECTED] To keep things simple, doing Net time /setsntp:pool.ntp.org then net stop w32time& net start w32time and net time /querysntp (ALL at the PDC-E) should give acceptable
result. If it doesn’t, then something at the firewall may be blocking 123 Sincerely, Microsoft MVP - Directory Services www.readymaids.com
- we know IT From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Almeida Pinto, Jorge de w32tm /monitor dc1.domain.com ***
PDC *** [10.100.110.12]:
ICMP: 0ms delay.
NTP: +0.0000000s offset from dc1.domain.com
RefID: 'LOCL' [76.79.67.76]
<<<<<<<<<<<<<<<<<<<<<<<<THIS
IS THE TIME SERVER THE PDC IS POINTING TO A PDC that is not configured with an
external time source:(default after install) C:\>w32tm /monitor A PDC that is configured with an
external time source C:\>w32tm /monitor A PDC that is configured to sync with
its own internal clock C:\>w32tm /monitor In addition to what Ulf said: http://blogs.dirteam.com/blogs/jorge/archive/2005/11/20/111.aspx Cheers, Jorge From:
[EMAIL PROTECTED] on behalf of Douglas M. Long I have Run w32tm /config /update
/syncfromflags:MANUAL /manualpeerlist: “navobs1.oar.net”
and also verified HKLM\System\CCS\Services\w32time\Parameters Type=NTP is set. I
stopped and started w32time, and still the PDC-E points to itself. Or at least
that is what I think it is saying. Isn’t LOCL in the following telling me that it is looking at itself
instead of an external time source? w32tm /monitor dc1.domain.com ***
PDC *** [10.100.110.12]:
ICMP: 0ms delay.
NTP: +0.0000000s offset from dc1.domain.com
RefID: 'LOCL' [76.79.67.76] From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Ulf B. Simon-Weidner Hi Douglas, To configure domain
members and DCs to use the default behavior, either Run w32tm /config
/update /syncfromflags:DOMHIER Or check the
following registrykey HKLM\System\CCS\Services\w32time\Parameters Type=NT5DS To configure a
server to use a NTP-Timesource (what you want to do on the PDC-E of the forest
root): Run w32tm /config
/update /syncfromflags:MANUAL /manualpeerlist:”fqdn1 fqdn2 ip1” Or check the
following registrykeys HKLM\System\CCS\Services\w32time\Parameters Type=NTP NTPServer=”fqdn1
fqdn2 ip1” To configure a
server to trust his BIOS-Clock (test-environment) or which is getting it’s
time from a 3rd party soft- or hardware attached locally check the
following reg-keys: HKLM\System\CCS\Services\w32time\Parameters Type=NoSync ReliableTimeSource =
1 (reg_dword) Afterwards I’d
restart w32time using net stop w32time
&& net start w32time Gruesse
- Sincerely, Ulf
B. Simon-Weidner
MVP-Book "Windows XP - Die Expertentipps": http://tinyurl.com/44zcz From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Douglas M. Long I have read the Time Service white paper
from Microsoft and am still confused. I have set the default domain GPO to use
NT5DS under Configure Windows NTP Client,
and set an external time server (navobs1.oar.net,0x1) for NTPServer. I have
also set Enable Windows NTP Server
to enabled. There are no other time related GPOs set in the domain. I was under
the assumption that with that setting my PDC emulator (DC1) should be synching
with navobs1.oar.net,0x1 and the other DC synchs with the PDC emulator, and
then all clients synch to the closest DC. When I run a w32tm /monitor from the
either DC or from any clients, I get the following. dc1.domain.com *** PDC ***
[10.100.110.12]: ICMP: 0ms delay. NTP: +0.0000000s offset
from dc1.domain.com
RefID: 'LOCL' [76.79.67.76] dc2.domain.com [10.100.110.13]: ICMP: 0ms delay. NTP: +0.0226641s offset
from dc1.domain.com
RefID: dc1.domain.com [10.100.110.12] When I run it from a client: dc1.domain.com *** PDC ***
[10.100.110.12]: ICMP: 0ms delay. NTP: +0.0000000s offset
from dc1.domain.com
RefID: 'LOCL' [76.79.67.76] dc2.domain.com [10.100.110.13]: ICMP: 8ms delay. NTP: +0.0342476s offset
from dc1.domain.com
RefID: dc1.domain.com [10.100.110.12] What I am seeing is that everything is
working except DC1 is not synching with an external time server. Is that
correct, or am I reading that wrong? If it isn’t synching with an
external time source, what setting am I missing? List info : http://www.activedir.org/List.aspx
List FAQ : http://www.activedir.org/ListFAQ.aspx
List archive: http://www.mail-archive.com/activedir%40mail.activedir.org/ |
- RE: [ActiveDir] Time Servic... Douglas M. Long
- RE: [ActiveDir] Time S... Almeida Pinto, Jorge de
- RE: [ActiveDir] Ti... Douglas M. Long
- RE: [ActiveDir] Time S... Almeida Pinto, Jorge de
- Re: [ActiveDir] Ti... Susan Bradley, CPA aka Ebitz - SBS Rocks [MVP]
- RE: [ActiveDir] Time S... deji
- Re: [ActiveDir] Time S... ChuckGaff
