Johnny-- I believe you may be confusing channels of the DV stream with stereo left/right channels.
Unfortunately, Premiere only captures 1 channel of DV audio. (And that single channel can be stereo.) What the original poster is talking about is using both channel inputs of the XL1, which the DV spec allows for, recording to two separate channels simultaneously. Many of us don't ever use it, because it only works in 32Khz 12 bit mode, as where the DV spec only allows for 1 channel at 48Khz 16bit. Keith, I know that some $capture cards$ allow you to capture that second channel (such as Canopus), but if you are using straight onboard DV, then I suggest you: capture with a software that captures 2 channels (alas, I have no recommendations), 2. record analog inputs from your camera to your computer. The 2nd option is less desirable, but may be the only way you can get the 2nd channel out of your camera. -jeff ----- Original Message ----- From: "Johnny Wu" <[EMAIL PROTECTED]> Premiere should have picked up both channel, one more thing to check, click on the video clip on your project and look at the property, is it said stereo or mono? >Yes, you can hear both channels if you have headphones plugged into the >camera. I am using a Panasonic AG-DV2500P to capture from. I can see the >level meters bouncing on both channels. I just can figure out how to get >it into Premiere. > >Is it possible that Firewire capture won't transfer both channels? > >Thanks. >-Keith ------------------------ Yahoo! Groups Sponsor --------------------~--> Fair play? Video games influencing politics. Click and talk back! http://us.click.yahoo.com/T8sf5C/tzNLAA/TtwFAA/ADr1lB/TM --------------------------------------------------------------------~-> Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Adobe-Premiere/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
