Dear Cristoph, Well, I could do the project at last. Seems like these two tapes were recorded from a computer or some other device that were too tiny. Anyway, I captured the tapes with NeoDVD (with flickering) and then I edited that in Premiere, and rendered. After that I used TMPEGEnc to reencode the final result using a Deinterlace Filter. After that the video looks good with no flickering.
So, I can not say I solved the problem, but got a way... I see that what you said about VCRs is correct, I live in Buenos Aires, Argentina where you can see the TV in PAL but all the VHS and camcorders are NTSC. My undoubtly confused capture card read NTSC with 25fr which is supposed not to work, but it did. Once again thank you very much for your help and your time. Kindest regards, */Leonel/**/ Dolara/* [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> * Christoph Wirsing escribió: > things are getting complicated now. > > this time it looks like a hardware problem to me. > > when you are digitizing vhs tape, what kind of vhs player are you using? > > usually you have to play pal on a pal player and ntsc on a ntsc player. > > there are only a few true professional ($$$) multiformat players around, but > all of the consumer players that claim to be multiformat do only half of the > conversion: > > a "multiformat" player in a pal country will translate the size and color > coding of a ntsc tape, but will still play 30 frames/sec. > > tv sets and monitors are rather tolerant, so you will be able to see the > movie on screen, but the signal will NOT BE RECORDABLE. > > so if you play the "wrong" system, the output of your vhs player will be > somewhere inbetween pal and ntsc, and that might confuse the capturing, as > you describe it. > > I live in a pal country and have experienced the same problems. > > so when I was in the us. the last time, I bought a 39$ ntsc vhs player and > now capturing ntsc tapes works perfectly. > > cheers christoph > > >> >> Dear all, (and specially for Christoph Wirsing) >> >> I thought I had found the answer to the VHS capturing. >> Well, it isn't so. >> >> For two VHS tapes the MainConcept plugin with Deinterlaced enabled when >> capturing worked perfectly. But I had one problem with one tape that >> captured without flickering but with some strange frame to frame delay >> sensation. It is acceptable, but it seems you are seeing the video with some >> filter that gives a look of a .mov file converted to .avi (for those who >> know what I'm saying). >> >> But the worst problem was with another two tapes. I don't know exactly how >> they were recorded but this is the problem: the tapes are supposed to be >> NTSC, but my capture card reads them as PAL B with 25 frame rate. >> >> How I see this? In the Capture Window the video looks black and white, so I >> get to the Mainconcept capture module settings, and automatically it tells >> me that the video is PAL B 25fps. still seeing in b&w. I change in the >> extended setup to NTSC and the video turns back to color. But when I click >> ok and come back to the Capture Window it turns again in black and white. I >> said: well, if it is PAL it is PAL... so I create a new project and tried to >> capture in PAL, but in the Capture settings Mainconcept MPEG tells me that >> it is not a PAL video and won't capture... >> >> Other strange things that may be considered to solve the problem: even when >> I said that I could do well with two other tapes, I must say that there was >> something strange: the video was NTSC, but when capturing in 29.97fps it >> dropped a lot of frames, but I could fix the problem capturing in what the >> video in settings strangely set automatically: 25fps. >> Other strange thing: when I play those two problem tapes (The PAL stuff) the >> settings not only are PAL B 25fps, they are 160x120 in size (?!) I declare >> for the record, that I see those VHS in my TV at full screen with no >> problems... >> >> Please help me if you can, I'm going nuts! >> >> Leonel Dolara >> Actor y Director >> >> __________________________________________________ >> Correo Yahoo! >> Espacio para todos tus mensajes, antivirus y antispam ¡gratis! >> Regístrate ya - http://correo.espanol.yahoo.com/ >> >> [Non-text portions of this message have been removed] >> > > > > > Yahoo! Groups Links > > > > > > [Non-text portions of this message have been removed] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Adobe-Premiere/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Adobe-Premiere/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
