My 3584-L32 with FC-AL drives takes less than 20 seconds on
AIX with TSM 4.2.2.10.

David Longo

>>> [EMAIL PROTECTED] 10/18/02 10:43PM >>>
I have had it hang up when I had a drive failure with a tape stuck in
the
drive. But it usually only takes 5 minutes for my 3584 with fibre
channel
LTO drives. I am running TSM 5.1.1 on win2k.
--------------------------
Thanks,
Matt

-----Original Message-----
From: Todd Lundstedt <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Sent: Fri Oct 18 11:41:46 2002
Subject: Audit Library question.

How long should the command
"Audit Library LibName CheckLabel=BARCODE"
take to process.  I have less than 200 tapes in the library.  I have
done
this before and it took less than 5 mins.  This one has been running
for
over 40 minutes now.  The processor is 99-100% idle.  No tapes in use.
All
reclamation set to 100 to prevent tapes from being used.

TSM 4.2.1.7
AIX 4.3.3
IBM LTO Ultrium drives in 3584 library.

Thanks in advance.


"MMS <health-first.org>" made the following
 annotations on 10/19/2002 07:34:09 PM
------------------------------------------------------------------------------
This message is for the named person's use only.  It may contain confidential, 
proprietary, or legally privileged information.  No confidentiality or privilege is 
waived or lost by any mistransmission.  If you receive this message in error, please 
immediately delete it and all copies of it from your system, destroy any hard copies 
of it, and notify the sender.  You must not, directly or indirectly, use, disclose, 
distribute, print, or copy any part of this message if you are not the intended 
recipient.  Health First reserves the right to monitor all e-mail communications 
through its networks.  Any views or opinions expressed in this message are solely 
those of the individual sender, except (1) where the message states such views or 
opinions are on behalf of a particular entity;  and (2) the sender is authorized by 
the entity to give such views or opinions.

==============================================================================

Reply via email to